Klein Tools 6313 T8H TORX® Pre...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$11,437.23
Klein Tools 6313 T8H TORX® Precision Screwdriver, 3-Inch Shank

Klein Tools 6313 T8H TORX® Precision Screwdriver, 3-Inch Shank

(No reviews yet) Write a Review

Model: 6313
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$11,437.23
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
T8H TORX® Precision Screwdriver, 3-Inch Shank

  • Features

    • Cushion-Grip™ handle for maximum comfort when working on small equipment
    • Heat treated and precision-machined tip for greater strength
    • The T8H Tamperproof Torx® is a versatile screwdriver for electronics and precision repair
    • TORX® is a registered trademark of Acument Intellectual Properties, LLC
    • Cushion-Grip™ Handles; Rotating Caps
    • Color coded rings for easy spotting of each tip type
    • Over-sized cap marking for quick identification of tip size
    • Precision Screwdriver features rotating cap for optimum and precise control
    • Nickel chrome plating rust prevention

  • Warnings

    • Always wear approved eye protection.
    • NOT insulated. Will NOT protect against electrical shock.
    • Do NOT use to pry or chisel.


6313 - spec sheet

Manufacturer Resources

Product Specs

Color Code:
Green
Handle Color:
Black/Yellow
Handle Diameter:
0.55" (1.4 cm)
Handle Length:
3.5" (8.9 cm)
Handle Material:
CA/TPE
Insulated:
No
Magnetic:
No
Overall Height:
0.71" (1.8 cm)
Overall Length:
6.5" (16.51 cm)
Overall Width:
0.71" (1.8 cm)
Shank Length:
3" (7.6 cm)
Shank Type:
Tamperproof Torx®
Tip Size:
T8H
Tip Type:
TORX®
Department:
Electrical
Product Group:
Hand Tools
Product Subgroup:
Screwdrivers & Drivers
Product Type:
Tamperproof Torx® Screwdriver
Product Details:
Tamperproof Torx® Screwdriver
Product Height:
2.5500 in
Product Material:
S2 Steel
Product Weight:
0.0700 lbs
Product Width:
2.9900 in
Product Depth:
6.4900 in

Klein Tools 6313 – Frequently Asked Questions

1) Will the Klein Tools 6313 screwdriver drive a security Torx screw with the center pin?
Yes. The 6313 is a tamperproof Torx driver, meaning the T8H tip is bored out in the center to clear the security pin in a pin-in-Torx (T8H) fastener. A standard T8 driver will bottom out on that pin and won't seat. The tip is sized T8H only, so it won't cover other security Torx sizes.
2) Can I use the Klein 6313 precision screwdriver on live electrical work?
No. The 6313 is not insulated and will not protect against electrical shock. De-energize the circuit before using it. If you need to work on or near energized parts, use a driver rated and marked as insulated instead.
3) How long is the Klein 6313 T8H driver, and will it reach into a recessed screw?
The shank measures 3 inches and the tool is 6.5 inches overall, with a 3.5 inch handle. That 3 inch shank reaches recessed security screws in panel covers, enclosures and small equipment housings without needing an extension.
4) Does the Klein 6313 hold the screw magnetically?
No, the tip is not magnetized. On overhead or vertical work you'll need to start the fastener by hand or hold it with a pick, because the driver won't retain it.
5) Is the Klein 6313 precision screwdriver strong enough for stubborn tamperproof screws?
The shank is S2 steel with a heat treated, precision machined tip, which is the harder tool steel used where a small tip has to take torque without rounding. It is still a precision driver with a 0.55 inch diameter handle, so don't use it to pry or chisel.
6) What makes a precision screwdriver different from a regular Torx driver for electronics work?
The 6313 has a rotating cap on the end of the Cushion-Grip handle, so you can brace it with a fingertip and spin the barrel with the other hand. That gives controlled, low-torque turning on small equipment and circuit boards, where a standard fixed-handle driver makes it easy to over-torque or cam out of a tiny T8H head.
7) How do I tell the Klein 6313 apart from the other precision drivers in my pouch?
Klein color codes these precision drivers by tip type and the 6313 carries a green ring on a black and yellow handle, plus an oversized cap marking showing the tip size. Pull it out of a roll and you can read T8H off the end cap without squinting at the tip.
8) Will the Klein 6313 handle rust in a damp tool bag or truck box?
The shank carries nickel chrome plating for rust prevention, and the handle is a CA/TPE composite rather than wood or bare metal. It holds up to normal service-vehicle storage.
9) What is the Klein Tools part number for the T8H tamperproof Torx precision screwdriver?
Order Klein Tools 6313. That is the T8H tamperproof Torx precision driver with the 3 inch shank; it is a single-configuration item, so there are no finish or size options to specify.
How fast can I get the Klein Tools 6313 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Klein Tools 6313 come with a warranty?
Absolutely. The Klein Tools 6313 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Klein Tools 6313?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Klein Tools 6313 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!