Tapcon 410 Stainless Steel Fla...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.74

Tapcon 410 Stainless Steel Flat Phillips Head Concrete Screw, Box of 100

(No reviews yet) Write a Review

Model: CSFS316134;T

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.74
Adding to cart… The item has been added
Free Shipping on orders over $199.99
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks

Tapcon 410 Stainless Steel Flat Phillips Head Concrete Screw, Box of 100

The Tapcon 410 Stainless Steel Flat Phillips Head Concrete Screw is engineered for dependable anchoring into concrete, brick, and block substrates. Constructed from 410 stainless steel, this concrete screw offers strong corrosion resistance and long-term durability for both indoor and outdoor masonry fastening applications. Each screw features a flat head design that seats flush with the work surface, paired with a Phillips drive for quick, secure installation using a standard Phillips bit. Sold in a convenient box of 100, the Tapcon concrete screw is a reliable fastening solution for contractors, installers, and DIY projects that demand consistent, repeatable performance on every job, from small repairs to full-scale masonry installations.

Key Features

  • Durable Construction: Made from 410 stainless steel, giving each concrete screw strong corrosion resistance and long service life in demanding jobsite and outdoor environments.
  • Flat Phillips Head: The flat head design seats flush with the work surface for a clean, finished appearance, while the Phillips drive allows for quick, secure installation with a standard driver.
  • Masonry-Rated Anchoring: Purpose-built as a concrete screw for direct fastening into concrete, brick, and block, reducing the need for separate anchors in many applications.
  • Box Quantity: Sold in a box of 100 screws, providing a consistent, ready-to-use supply for larger installation projects without the need for frequent reordering.
  • Country of Origin: Made in Taiwan or US of Global Materials, reflecting Tapcon's sourcing standards for this fastener line.

Technical Specifications

  • Country of Origin: Made in Taiwan or US of Global Materials
  • Box Quantity: 100

Typical Applications

  • Anchoring into Concrete, Brick, and Block Substrates
  • Commercial and Residential Construction Projects
  • Fastening Fixtures, Brackets, and Hardware to Masonry Surfaces
  • General Contractor, Installer, and DIY Use
  • Renovation and New Construction Masonry Work

Why Tapcon?

Tapcon concrete screws are trusted by professionals for dependable masonry fastening. The 410 stainless steel construction of the screw delivers corrosion resistance, while the flat Phillips head design ensures a clean, flush, professional finish every time it is installed. With each box containing 100 screws, Tapcon makes it easy to keep crews stocked and projects moving forward without interruption, whether the job calls for a handful of fasteners or a full case for large-scale masonry work. The combination of a corrosion-resistant stainless steel body and a flush-seating flat Phillips head makes this concrete screw a practical choice for contractors and installers who need fasteners that hold up to the demands of concrete, brick, and block anchoring.

Specifications by Size

SizePart #Pull-Out (lbs.)*Shear (lbs.)*Bit SizeBox QtyMax. Fixture ThicknessMin. Edge DistanceMin. EmbedmentMin. Fixture Hole Ø (Hole Spotted)Min. Fixture Hole Ø (In Place)Min. SpacingThread LengthThread TypeDriver SizeUPC
3/16" x 1-3/4"SPF3-1346007205/32"1003/4"2-1/4"1"1/4"1/4"3"1-3/4"Hi-Lo#2092097953291
3/16" x 2-1/4"SPF3-2146007205/32"1001-1/4"2-1/4"1"1/4"1/4"3"1-3/4"Hi-Lo#2092097953307
3/16" x 2-3/4"SPF3-2346007205/32"1001-3/4"2-1/4"1"1/4"1/4"3"1-3/4"Hi-Lo#2092097953314
1/4" x 1-1/4"SPF4-1147509003/16"1001/4"3"1"5/16"5/16"4"1-1/4"Hi-Lo#3092097909519
1/4" x 1-3/4"SPF4-1347509003/16"1003/4"3"1"5/16"5/16"4"1-3/4"Hi-Lo#3092097909526
1/4" x 2-1/4"SPF4-2147509003/16"1001-1/4"3"1"5/16"5/16"4"1-3/4"Hi-Lo#3092097909533
1/4" x 2-3/4"SPF4-2347509003/16"1001-3/4"3"1"5/16"5/16"4"1-3/4"Hi-Lo#3092097909540
1/4" x 3-1/4"SPF4-3147509003/16"1002-1/4"3"1"5/16"5/16"4"1-3/4"Hi-Lo#3092097909557
1/4" x 3-3/4"SPF4-3347509003/16"1002-3/4"3"1"5/16"5/16"4"1-3/4"Hi-Lo#3092097909564

* Pull-out and shear values are average ultimate loads in 2000 PSI concrete, offered as a guide only and not guaranteed. A 4:1 safety factor (25% of ultimate) is generally accepted as a safe working load.

Manufacturer Resources

Product Specs

Product Brand:
Tapcon
Product Type:
Concrete Screw
Box Quantity:
100
Department:
Fasteners
Product Group:
Screws
Product Subgroup:
Wood and Construction Screws
Product Material:
410 Stainless Steel
Location Rating:
Moist

Tapcon CSFS316134;T – Frequently Asked Questions

1) What size drill bit do I need for Tapcon 410 stainless concrete screws?
Drill with a 5/32 inch carbide bit for the 3/16 inch diameter screws, and a 3/16 inch bit for the 1/4 inch diameter screws. That is the hole in the concrete, brick or block. The hole in the fixture itself needs to be larger: minimum 1/4 inch for 3/16 screws and 5/16 inch for 1/4 inch screws, whether you spot the hole or drill through the fixture in place.
2) How close to the edge of a concrete slab can I set a Tapcon concrete screw?
Keep 2-1/4 inches from a free edge with the 3/16 inch screws and 3 inches with the 1/4 inch screws. Spacing between screws is 3 inches for 3/16 and 4 inches for 1/4 inch. Going tighter than that risks spalling the concrete and losing the hold, so on a narrow curb or a block web, plan your hole layout before you drill the fixture.
3) Can Tapcon 410 stainless screws be used outdoors or in wet areas?
The 410 stainless steel body is rated for moist locations, which covers exterior masonry, damp basements, planters and wash-down areas where plated carbon steel Tapcons would rust out. 410 is a hardenable stainless, so it gets the thread strength needed to cut concrete while still resisting corrosion. For permanently submerged or coastal salt-spray service, 410 is the lower-corrosion-resistance stainless family.
4) Do I need a separate anchor or shield with these Tapcon screws?
No plastic plug or lead shield is needed. The Hi-Lo thread cuts its own thread into concrete, brick or block, so you drill the hole and drive the screw. All you need is a hammer drill with the matching carbide bit and a Phillips driver.
5) Will a flat head Tapcon sit flush in a countersunk hole?
The flat Phillips head is made to seat flush with the surface of the fixture, so it works where a hex washer head would stand proud: countersunk angle, door thresholds, flooring track, trim and anything that gets covered or walked on. If the fixture is not countersunk, the flat head will pull into soft material but will sit on top of steel.
6) What Phillips bit size drives Tapcon flat head concrete screws?
A #2 Phillips driver fits the 3/16 inch diameter screws and a #3 Phillips fits the 1/4 inch diameter screws. Use the right one; a #2 in a 1/4 inch head will cam out and strip the recess before the screw is seated.
7) What sizes do Tapcon 410 stainless flat head concrete screws come in, and how many per box?
Nine sizes, all packed 100 to a box. In 3/16 inch diameter: 1-3/4, 2-1/4 and 2-3/4 inch lengths. In 1/4 inch diameter: 1-1/4, 1-3/4, 2-1/4, 2-3/4, 3-1/4 and 3-3/4 inch. Thread length runs 1-3/4 inches on all of them except the 1/4 x 1-1/4, which is fully threaded at 1-1/4 inches.
How fast can I get the Tapcon CSFS316134;T delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Tapcon CSFS316134;T come with a warranty?
Absolutely. The Tapcon CSFS316134;T is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Tapcon CSFS316134;T?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Tapcon CSFS316134;T from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.