You may also like
Tapcon 410 Stainless Steel Flat Phillips Head Concrete Screw, Box of 100
Model: TAP-CSFS
Tapcon 410 Stainless Steel Flat Phillips Head Concrete Screw, Box of 100The Tapcon 410 Stainless Steel Flat Phillips Head Concrete Screw is engineered for dependable anchoring into concrete, brick,...
Tapcon
Starting at
$56.37
Tapcon Large Diameter Hex Head Concrete Screw, 410 Stainless Steel
Model: TAP-LD-410
Tapcon Large Diameter Hex Head Concrete Screw, 410 Stainless SteelThe Tapcon Large Diameter Hex Head Concrete Screw, 410 Stainless Steel is built for secure anchoring into concrete, block, and brick...
Tapcon
Starting at
$251.86
Tapcon Hex Washer Head Concrete Screw, Blue Climaseal Coating
Model: TAP-CSH
Tapcon Hex Washer Head Concrete Screw, Blue Climaseal CoatingThe Tapcon Hex Washer Head Concrete Screw is a steel masonry fastener finished in Tapcon's signature Blue Climaseal coating for added...
Tapcon
Starting at
$17.51
Tapcon Flat Head Concrete Screw, Blue Climaseal Coating, Box of 100
Model: TAP-CSF
Tapcon Flat Head Concrete Screw, Blue Climaseal Coating, Box of 100The Tapcon Flat Head Concrete Screw is engineered for dependable fastening into concrete, block, and masonry surfaces. Each screw...
Tapcon
Starting at
$15.47
Tapcon 410 Stainless Steel Hex Washer Head Concrete Screw, Box of 100
Tapcon 410 Stainless Steel Hex Washer Head Concrete Screws are engineered for dependable anchoring into concrete, block, and brick substrates. Each box contains 100 screws constructed from 410 stainless steel, giving contractors and DIY installers a corrosion-resistant fastening solution for both indoor and outdoor masonry applications. The hex washer head design provides a wide bearing surface and allows for quick driving with a hex driver, nut driver, or socket, making these concrete screws a practical choice for anchoring fixtures, brackets, electrical boxes, shelving, and other hardware directly into masonry. Each unit is supplied as a full box of 100, giving crews a ready supply for larger jobs without the need to reorder small quantities.
Key Features
- Material: 410 stainless steel construction resists rust and corrosion, making these screws suitable for interior and exterior masonry fastening.
- Head Style: Hex washer head design offers a wide bearing surface and allows installation with a hex driver, nut driver, or socket for faster driving.
- Packaging: Sold in a box of 100 screws, providing a convenient bulk quantity for job sites, contractors, and larger masonry fastening projects.
- Country of Origin: Made in Taiwan or the United States from globally sourced materials.
Technical Specifications
- Country of Origin: Made in Taiwan or US of Global Materials
- Box Quantity: 100
Typical Applications
- Anchoring Fixtures and Brackets into Concrete, Block, or Brick
- Mounting Electrical Boxes and Conduit Straps to Masonry Surfaces
- Securing Shelving, Frames, and Hardware to Masonry Walls
- Commercial and Residential Construction Projects
- Renovation and Retrofit Masonry Fastening
Why Tapcon?
Tapcon is a recognized name in concrete fastening, and this 410 stainless steel hex washer head screw, packaged in a convenient box of 100, delivers a corrosion-resistant option for demanding masonry applications. With materials sourced from Taiwan or the United States, these screws provide a dependable, ready-to-use fastening solution for contractors and tradespeople working with concrete, block, and brick on commercial and residential job sites.
Specifications by Size
| Size | Part # | Pull-Out (lbs.)* | Shear (lbs.)* | Bit Size | Box Qty | Max. Fixture Thickness | Min. Edge Distance | Min. Embedment | Min. Fixture Hole Ø (Hole Spotted) | Min. Fixture Hole Ø (In Place) | Min. Spacing | Thread Length | Thread Type | Driver Size | UPC |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1/4" x 1-1/4" | SHW-4114 | 750 | 900 | 3/16" | 100 | 1/4" | 3" | 1" | 5/16" | 5/16" | 4" | 1-1/4" | Hi-Lo | 5/16" | 092097909458 |
| 1/4" x 1-3/4" | SHW-4134 | 750 | 900 | 3/16" | 100 | 3/4" | 3" | 1" | 5/16" | 5/16" | 4" | 1-3/4" | Hi-Lo | 5/16" | 092097909465 |
| 1/4" x 2-1/4" | SHW-4214 | 750 | 900 | 3/16" | 100 | 1-1/4" | 3" | 1" | 5/16" | 5/16" | 4" | 1-3/4" | Hi-Lo | 5/16" | 092097909472 |
| 1/4" x 2-3/4" | SHW-4234 | 750 | 900 | 3/16" | 100 | 1-3/4" | 3" | 1" | 5/16" | 5/16" | 4" | 1-3/4" | Hi-Lo | 5/16" | 092097909489 |
| 1/4" x 3-1/4" | SHW-4314 | 750 | 900 | 3/16" | 100 | 2-1/4" | 3" | 1" | 5/16" | 5/16" | 4" | 1-3/4" | Hi-Lo | 5/16" | 092097909496 |
| 1/4" x 3-3/4" | SHW-4334 | 750 | 900 | 3/16" | 100 | 2-3/4" | 3" | 1" | 5/16" | 5/16" | 4" | 1-3/4" | Hi-Lo | 5/16" | 092097909502 |
| 1/4" x 5" | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — |
* Pull-out and shear values are average ultimate loads in 2000 PSI concrete, offered as a guide only and not guaranteed. A 4:1 safety factor (25% of ultimate) is generally accepted as a safe working load.
Manufacturer Resources
Product Specs
- Product Brand:
- Tapcon
- Product Type:
- Hex Head Concrete Screw
- Box Quantity:
- 100
- Department:
- Fasteners
- Product Group:
- Concrete Anchors
- Product Subgroup:
- Concrete Screws
- Product Material:
- 410 Stainless Steel
- Location Rating:
- Moist
Tapcon CSHS14114;T – Frequently Asked Questions
1) What size drill bit do I need for a 1/4 inch Tapcon stainless concrete screw?
Drill with a 3/16 inch bit. All the 1/4 inch diameter sizes of the Tapcon 410 stainless hex washer head screw use a 3/16 inch hole, and the hex head drives with a 5/16 inch driver, nut driver, or socket.
2) How deep do these Tapcon concrete screws have to go into the concrete to hold?
Minimum embedment is 1 inch into the base material. Subtract the thickness of what you are fastening from the screw length and make sure at least 1 inch is left in the concrete, block, or brick. That is why the sizes step up in half-inch increments: the 1/4 x 1-1/4 inch screw handles fixtures up to 1/4 inch thick, 1-3/4 up to 3/4 inch, 2-1/4 up to 1-1/4 inch, 2-3/4 up to 1-3/4 inch, 3-1/4 up to 2-1/4 inch, and 3-3/4 up to 2-3/4 inch.
3) How close to the edge of a concrete wall can I set a Tapcon stainless screw, and how far apart?
Keep anchors at least 3 inches from a free edge and at least 4 inches apart from each other. Those are the published minimums for the 1/4 inch 410 stainless hex washer head screws, and crowding either one risks spalling the concrete or losing hold.
4) Can I use these Tapcon screws outdoors or in a damp area like a parking garage?
Yes. The 410 stainless steel construction is why this version exists, and it carries a Moist location rating, so it suits exterior masonry and damp interior work where plain blue-coated carbon steel Tapcons would be marginal.
5) I need to go through a 2x4 plate into a concrete slab. Which length Tapcon do I order?
A nominal 2x4 plate measures 1-1/2 inches thick, so you need a screw rated for a fixture thickness of at least that. The 1/4 x 2-3/4 inch handles fixtures up to 1-3/4 inch and still gets the required 1 inch of embedment; the 1/4 x 3-1/4 inch gives you more depth in the slab if the concrete is sound. The 1/4 x 2-1/4 inch tops out at 1-1/4 inch of fixture and is too short for that plate.
6) What size hole do I need in the bracket or fixture I am fastening down?
Allow a 5/16 inch minimum hole in the fixture, whether you are spotting the hole through it or drilling the concrete first and setting it in place. That clears the 1/4 inch screw body and lets the hex washer head bear on the fixture rather than the thread.
7) Does the whole length of a Tapcon stainless screw have thread, or just part of it?
Thread length caps out at 1-3/4 inches on the longer sizes. The 1/4 x 1-1/4 inch is fully threaded at 1-1/4 inch, the 1/4 x 1-3/4 is threaded 1-3/4 inch, and the 2-1/4, 2-3/4, 3-1/4, and 3-3/4 inch screws all carry 1-3/4 inch of Hi-Lo thread with the balance as unthreaded shank running through the fixture.
8) Will a hex washer head Tapcon work for mounting electrical boxes and conduit straps to block?
That is one of the intended uses. The wide bearing surface of the hex washer head holds thin sheet-metal items like device boxes, conduit straps, shelf standards, and brackets flat against concrete, block, or brick without pulling through, and you drive it with a socket or nut driver instead of a bit that can cam out.
9) Should I use a hex washer head Tapcon or a flat head one?
Pick the hex washer head when the fastener can sit on the surface, as with brackets, straps, and framing clips, since the washer face spreads the clamping load and the 5/16 inch hex drives fast with a socket. Choose a flat or Phillips countersunk concrete screw instead when the head has to sit flush in a countersunk hole, for example under a door threshold or a wood sill.
10) How many screws come in a box of Tapcon 410 stainless hex washer head concrete screws?
Each box holds 100 screws of a single size, and that applies across all seven lengths offered, from 1/4 x 1-1/4 inch up to 1/4 x 5 inch. Sizes are packed separately, so a job needing two lengths means two boxes.
How fast can I get the Tapcon CSHS14114;T delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Tapcon CSHS14114;T come with a warranty?
Absolutely. The Tapcon CSHS14114;T is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Tapcon CSHS14114;T?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Tapcon CSHS14114;T from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.