Metallics TRS1210 Thread Rod 7...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$179.86
$130.00

Metallics TRS1210 Thread Rod 7/8-9 X 10' St-zn (Bundle 4)

(No reviews yet) Write a Review

Model: TRS1210
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$179.86
$130.00
Adding to cart… The item has been added
Free Shipping on orders over $199.99
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
Thread Rod 7/8-9 X 10' St-zn (Bundle 4)

Manufacturer Resources

Product Specs

Division:
Electrical H1
Pack Type:
Bundle
Sub Division:
Electrical-E H2
Department:
Fasteners
Product Group:
Rods, Pins and Rivets
Product Subgroup:
Threaded Rod
Product Type:
Threaded Rod

Metallics TRS1210 – Frequently Asked Questions

1) What hardware do I need to order with 7/8-9 threaded rod?
The bundle is rod only, with no nuts, washers, couplings or anchors included. Everything that lands on it has to match 7/8-9 coarse thread: hex nuts, flat washers, rod couplings for runs longer than 10 feet, and whatever concrete or beam anchor accepts a 7/8 inch rod. Mismatched 7/8-14 fine thread nuts will not run on.
2) Is zinc plated threaded rod like the TRS1210 OK for outdoor or wet locations?
Zinc plated steel is a mild corrosion coating meant for dry interior work: mechanical and electrical hangers, trapeze supports, and anchoring inside conditioned or protected spaces. For exterior, high humidity, coastal, or washdown areas, step up to hot dip galvanized or stainless rod in the same 7/8-9 thread instead of zinc plated.
3) Can I cut the 10 foot TRS1210 rod down to shorter hanger lengths?
Yes. Continuously threaded rod is cut to length on site, and a 10 foot stick yields whatever drop lengths your layout needs. Cut with an abrasive wheel or bandsaw, then chase or file the cut end so a 7/8-9 nut threads on cleanly. Cutting removes zinc at the end, so touch it up if the rod is anywhere damp.
4) Is 7/8 inch threaded rod overkill for hanging conduit and electrical racks?
For most conduit and cable tray drops, 3/8 or 1/2 inch rod carries the load, and 7/8 inch is heavier than needed. The 7/8-9 size earns its place on long unsupported spans, heavy trapeze assemblies carrying multiple large raceways, big equipment or transformer supports, and anywhere the engineer has specified that diameter on the drawing. If your submittal calls out 7/8 inch rod, this is the size; if it does not, a smaller diameter is usually the right order.
How fast can I get the Metallics TRS1210 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics TRS1210 come with a warranty?
Absolutely. The Metallics TRS1210 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics TRS1210?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics TRS1210 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.