Topaz Lighting 24 Schedule 40 ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$9.70
Topaz Lighting 24 Schedule 40 PVC Special Radius Elbow, Plain End

Topaz Lighting 24 Schedule 40 PVC Special Radius Elbow, Plain End

(No reviews yet) Write a Review

Model: 83

In Stock (leaves warehouse same day if ordered before 3pm ET)

$9.70
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Topaz Lighting 24 Schedule 40 PVC Special Radius Elbow, Plain End

The Topaz Lighting Schedule 40 PVC Special Radius Elbow delivers smooth, reliable direction changes in conduit raceway systems, with plain spigot ends for straightforward solvent-cement assembly to standard Schedule 40 PVC conduit and fittings. This elbow family is available in 22.5°, 45°, and 90° special radius angle configurations and trade sizes ranging from 1/2" through 4", giving contractors and engineers the flexibility to match virtually any raceway layout. Manufactured from rugged, noncorrosive, nonconductive Schedule 40 PVC and cULus Approved, it is suitable for both above-ground and below-ground electrical conduit installations.

Key Features

  • Trade Size Range: Available in 1/2" through 4" trade sizes to match a wide range of raceway diameters.
  • Angle Options: Offered in 22.5°, 45°, and 90° special radius configurations for low-friction wire pulling and smooth routing around layout changes.
  • Durable Construction: Manufactured from Schedule 40 PVC — rugged, noncorrosive, and nonconductive — for long-lasting performance without rust or galvanic corrosion.
  • Plain Spigot Ends: Clean, plain spigot finishes on both ends for secure solvent-cement joining to standard Schedule 40 PVC conduit and fittings.
  • Above & Below Ground Suitability: Rated for use in both above-ground and below-ground conduit installations across commercial, industrial, and utility applications.
  • Nonconductive Material: Inherent electrical nonconductivity eliminates the need for bonding or grounding of the fitting itself.

Certifications & Compliance

  • cULus Approved
  • Schedule 40 PVC — Suitable for Above and Below Ground Use

Technical Specifications

  • Conduit Type: PVC Schedule 40
  • Connection Type: Plain End (Spigot)
  • Product Material: PVC
  • Available Trade Sizes: 1/2" through 4"
  • Available Angles: 22.5°, 45°, 90°

Typical Applications

  • Commercial and Industrial Electrical Conduit Raceway Systems
  • Underground Conduit Installations and Duct Banks
  • Above-Ground Exposed Conduit Runs Requiring Direction Changes
  • Utility and Infrastructure Electrical Distribution Projects
  • New Construction and Renovation Electrical Rough-In Work
  • Corrosive or Moisture-Prone Environments Where Metallic Conduit Is Unsuitable

Why Topaz Lighting?

Topaz Lighting offers one of the largest selections of Schedule 40 PVC Special Radius Elbows, spanning 22.5°, 45°, and 90° angles across trade sizes from 1/2" through 4", so contractors and engineers can source the exact fitting for any project configuration. Each elbow is manufactured from rugged, noncorrosive, and nonconductive Schedule 40 PVC and carries cULus approval, confirming compliance with North American electrical safety standards. Topaz Lighting's commitment to quality materials and broad product availability makes it a trusted partner for professional electrical installations across commercial, industrial, and utility sectors.

Product Specs

Product Type:
Elbow
Conduit Type:
PVC Schedule 40
Connection Type:
Plain End
Listing:
cULus
Department:
Electrical
Product Group:
Conduit & Raceway
Product Subgroup:
Conduit Bodies & Fittings
Product Material:
PVC
Product Size:
1/2" - 4"

Topaz Lighting 83 – Frequently Asked Questions

1) What angles and trade sizes do the Topaz Lighting Schedule 40 PVC elbows come in?
Three sweep angles are offered. The 90 degree elbow covers 1/2, 3/4, 1, 1-1/2 and 4 inch trade sizes; the 45 degree covers 1-1/4, 2 and 3-1/2 inch; and there is a 22.5 degree elbow in 2-1/2 inch. Match the trade size to the conduit run you are turning, then pick the angle the layout needs. Two 45s stacked give you a gentler direction change than a single 90 when you are worried about pulling tension.
2) How do the Topaz PVC elbows connect to conduit, and do I need glue?
Both ends are plain spigot ends, so they solvent cement into the bell end of standard Schedule 40 PVC conduit or into couplings. There are no threads and no set screws. You supply the PVC cement; it is not part of the fitting. If your run is threaded metal conduit, this is the wrong fitting for it.
3) Are the Topaz PVC conduit elbows UL listed for a commercial job?
The elbows are cULus approved, which covers both the US and Canadian listings. That is the mark an inspector or a spec on the drawing normally looks for on a nonmetallic raceway fitting.
4) Can a Schedule 40 PVC elbow be buried, or is it above ground only?
Schedule 40 PVC of this type is rated for both above ground and below ground conduit installation, so the same elbow works in an exposed run and in a duct bank or direct burial trench. That is one reason spec writers standardize on it across a site instead of stocking two families of fittings.
5) Do I have to bond or ground a PVC conduit elbow?
PVC is nonconductive, so the elbow itself is not part of any equipment grounding path and needs no bonding bushing or grounding jumper. Your equipment grounding conductor is pulled inside the raceway instead, the way it is anywhere a nonmetallic raceway is used. If you need the raceway itself to serve as the ground path, you want metal conduit and metal fittings, not this.
6) Will a PVC elbow hold up in a wash-down area or a corrosive plant environment where steel conduit rusts?
PVC does not rust and will not suffer galvanic corrosion, which is exactly why it gets specified in moisture-prone and chemically aggressive spaces where EMT or rigid steel gives up. The tradeoff is mechanical: PVC has no impact resistance to compare with steel, so in areas subject to physical damage the raceway still needs to be routed or protected accordingly.
7) What is the difference between a 22.5 degree, 45 degree and 90 degree conduit elbow, and which should I order?
It is purely the amount of direction change. A 90 turns the run square, typically coming up out of a slab or turning into a wall. A 45 splits a turn into two gentler bends so the pull is easier on the conductors, and it is what you use to offset around an obstruction. The 22.5 is a shallow correction, used for slight grade or alignment changes in a long underground run where a 45 would overshoot. Available here: 90 degree in 1/2 through 4 inch, 45 degree in 1-1/4, 2 and 3-1/2 inch, and 22.5 degree in 2-1/2 inch.
How fast can I get the Topaz Lighting 83 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Topaz Lighting 83 come with a warranty?
Absolutely. The Topaz Lighting 83 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Topaz Lighting 83?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Topaz Lighting 83 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!