Topaz Lighting 61 Schedule 40 ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$4.01
Topaz Lighting 61 Schedule 40 PVC Special Radius Elbow, Plain End

Topaz Lighting 61 Schedule 40 PVC Special Radius Elbow, Plain End

(No reviews yet) Write a Review

Model: 7015

In Stock (leaves warehouse same day if ordered before 3pm ET)

$4.01
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Topaz Lighting 61 Schedule 40 PVC Special Radius Elbow, Plain End

The Topaz Lighting Schedule 40 PVC Special Radius Elbow is engineered to deliver smooth, reliable directional changes in conduit raceway systems across a wide range of layout configurations. This special radius elbow family is available in 15°, 22.5°, 30°, and 90° angle options and spans trade sizes from 1/2" through 5", giving contractors and engineers the flexibility to match the exact bend and size required for a given run. Manufactured from rugged, noncorrosive, and nonconductive Schedule 40 PVC with clean plain spigot ends on both sides, these elbows are suitable for both above-ground and below-ground electrical conduit installations. Every elbow in the line carries cULus approval, confirming compliance with North American electrical safety standards.

Key Features

  • Trade Size Range: Available from 1/2" through 5", allowing installers to match the exact conduit size for each run.
  • Angle Options: Offered in 15°, 22.5°, 30°, and 90° special radius configurations for long, low-friction sweeps that reduce wire-pulling tension compared to standard-radius elbows.
  • Durable Construction: Manufactured from Schedule 40 PVC — rugged, noncorrosive, and nonconductive — resisting rust and galvanic corrosion in demanding environments.
  • Plain Spigot Ends: Clean plain-end finishes on both sides for straightforward solvent-cement joining to standard Schedule 40 PVC conduit and fittings.
  • Above & Below Ground Suitability: Rated for use in both above-ground and below-ground conduit installations across commercial, industrial, and utility applications.
  • Nonconductive Material: PVC construction provides inherent electrical nonconductivity, eliminating the need for bonding or grounding of the fitting itself.
  • Carton Packaging: Supplied in cartons of 100 for efficient stocking and job-site distribution.

Certifications & Compliance

  • cULus Approved
  • Schedule 40 PVC — Suitable for Above and Below Ground Use

Technical Specifications

  • Conduit Type: PVC Schedule 40
  • Connection Type: Plain End (Spigot)
  • Product Material: PVC
  • Pack Size: 100

Typical Applications

  • Commercial and Industrial Electrical Conduit Raceway Systems
  • Underground Conduit Installations and Duct Banks
  • Above-Ground Exposed Conduit Runs Requiring Direction Changes
  • Utility and Infrastructure Electrical Distribution Projects
  • New Construction and Renovation Electrical Rough-In Work
  • Corrosive or Moisture-Prone Environments Where Metallic Conduit Is Unsuitable

Why Topaz Lighting?

Topaz Lighting offers one of the largest selections of Schedule 40 PVC Special Radius Elbows, giving contractors and engineers access to the angle and size combination needed for virtually any project configuration. Each elbow is manufactured from rugged, noncorrosive, nonconductive PVC and carries cULus approval, confirming compliance with North American electrical safety standards. This combination of broad availability and consistent quality makes Topaz Lighting a trusted source for professional electrical conduit installations across commercial, industrial, and utility sectors.

Product Specs

Product Type:
Elbow
Conduit Type:
PVC Schedule 40
Connection Type:
Plain End (Spigot)
Listing:
cULus
Department:
Electrical
Product Group:
Conduit & Raceway
Product Subgroup:
Conduit Bodies & Fittings
Product Material:
PVC
Pack size (unit):
100
Product Size:
1/2" - 5"
Angle:
15° - 90°

Topaz Lighting 7015 – Frequently Asked Questions

1) What sizes and bend angles do the Topaz Schedule 40 PVC elbows come in?
Topaz PVC elbows are offered across trade sizes from 1/2 inch up to 5 inch, in 15, 22.5, 30 and 90 degree bends. The pairings that exist are 90 degree in 1/2 inch (part 61), 3/4 inch (62), 1 inch (63) and 5 inch (70A); 15 degree in 1-1/2 inch (6515), 2 inch (6615) and 4 inch (7015); 30 degree in 1-1/4 inch (6430) and 2-1/2 inch (6730); and 22.5 degree in 3 inch (6822). Pick the angle by how much the run has to deviate, then the trade size to match the conduit.
2) How do these Topaz PVC elbows join to the conduit - do they glue or do I need couplings?
Both ends are plain spigot ends, so the elbow slips into the bell of a standard Schedule 40 PVC conduit or coupling and is solvent cemented. No belled socket is built into the fitting itself, which means if you are joining to another plain-end length you need a coupling between them. Solvent cement is not included with the fitting.
3) Can Topaz PVC Schedule 40 elbows be direct buried or encased in concrete underground?
Yes, these Schedule 40 PVC elbows are rated for both above ground and below ground conduit use, so they suit direct burial runs and duct bank work as well as exposed runs. They are cULus approved.
4) Do I have to bond or ground a PVC conduit elbow like I would a metal one?
No. The elbow is PVC, which is nonconductive, so the fitting itself needs no bonding or grounding. Any equipment grounding conductor still runs inside the raceway as the installation requires. That is the practical difference against a rigid steel elbow, which is part of the metallic raceway path.
5) Should I use a PVC elbow or a rigid metal elbow in a corrosive or wet location?
PVC is the one to use where moisture or corrosive atmosphere would attack steel. Schedule 40 PVC is noncorrosive and will not rust or set up galvanic corrosion at the joint, and it is approved for underground as well as exposed work. Choose metal instead where the run needs physical impact resistance or where the raceway itself is being used as an equipment grounding path, since PVC cannot serve either role.
6) Are Topaz PVC elbows sold individually or by the box?
Pack size is 100 per pack. That is bulk quantity for rough-in work, so factor it in if you only need a handful of bends on a small job.
7) I need a shallow direction change in a long 2 inch PVC run - which elbow do I order?
For 2 inch conduit the shallow bend offered is the 15 degree elbow, part 6615. A 15 degree fitting takes the run off line gently, which keeps pulling tension lower than stacking sharper bends. If the deviation is larger, the 30 degree is stocked in 1-1/4 inch and 2-1/2 inch and the 22.5 degree in 3 inch, so match the angle to the trade size you are running.
8) Will a 90 degree PVC elbow work for a 5 inch feeder run?
Yes, the 90 degree bend goes up to 5 inch trade size, part 70A. Below that the 90 degree is stocked in 1/2 inch, 3/4 inch and 1 inch. On large conductors a sweep of this size is what keeps a pull manageable at a right angle turn.
How fast can I get the Topaz Lighting 7015 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Topaz Lighting 7015 come with a warranty?
Absolutely. The Topaz Lighting 7015 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Topaz Lighting 7015?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Topaz Lighting 7015 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!