Trimco 5002 Lock Astragal, Stainless Steel (1-9/16" x 6") - Use with Cylindrical Locks

No. The 5002 is cut for cylindrical locks. If the door carries a mortise lock, you need the mortise version in the same 5000 family instead. Trimco builds the 5000 Series in both mortise and cylindrical models, so the lock type on the door decides which one you order.

No handing to specify. The 5002 is non-handed, so the same part goes on a left hand or right hand active leaf. That also means you can stock one item for a building with doors swinging both ways.

The 5002 is wrought from 13 gauge stainless steel, which is heavy enough for commercial corridor and entry duty. Trimco lists the 5000 Series for commercial and industrial buildings, government and military facilities, hospitality, multifamily and mixed-use, and office buildings. If you want a cast part instead of wrought, that is the 5000-T in the same family.

One finish only: 630, satin stainless steel. That is the standard commercial satin stainless number, so it matches 630 push plates, pulls, hinges and lock trim already on the opening. There is no bronze or brass option on the 5002.

Yes, the 5002 is listed ADA compliant. For a facility standardizing on accessible openings, that covers the astragal at the meeting stile.

Compare the material as specified. The Trimco 5002 is wrought from 13 gauge stainless steel in a 630 satin stainless finish, which is the harder, denser of the two options and takes cart and traffic contact at the lock without denting easily. The aluminum peers are lighter sections: the NGP 139A is anodized aluminum, the NGP 176A 84 is anodized aluminum in an 84 inch overlapping profile, and the Cal-Royal EAST-501 is aluminum with a vinyl insert. If the requirement is steel rather than aluminum on a pair, the NGP 139SP is a steel astragal. Note the 5002 and the full-height astragals are not interchangeable pieces, so material is only the deciding factor within the same shape.

The 5002 is the cylindrical lock model. The Trimco 5000 Series covers both, with cast and wrought astragals for mortise and cylindrical locks: the 5000-T is cast construction, while the 5001 and 5002 are wrought from 13 gauge stainless steel. For a mortise lock, order the 5000 Series model cut for mortise rather than the 5002. All of them are non-handed, so handing is not a variable when you specify.

The Trimco 5002 lock astragal is ADA compliant and specified for commercial use, in a 630 satin stainless steel finish, which is the common commercial hardware finish and will sit consistently alongside other 630 trim in a building standard. Among the peer astragals, the NGP 139SP is fire-rated steel and the Pemko 369 is fire-rated aluminum, which are the ones to look at when the rating on the drawing governs the meeting stile of a pair.