Trimco AP428 1-1/4" Diameter A...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$663.98
$575.68
Trimco Trimco AP428 1-1/4" Diameter Architectural Ladder Pull Offset Standoffs Square Groove Ends TRI-AP428

Trimco AP428 1-1/4" Diameter Architectural Ladder Pull Offset Standoffs Square Groove Ends

(No reviews yet) Write a Review

Model: TRI-AP428E-128.605
From the AP400 Series Collection
$663.98
$575.68
Selected Mounting is
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$663.98
$575.68
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

TRIMCO AP428 1-1/4" DIAMETER ARCHITECTURAL LADDER PULL OFFSET STANDOFFS SQUARE GROOVE ENDS OVERVIEW

AP428 1-1/4" Diameter Architectural Ladder Pull Offset Standoffs Square Groove Ends. 1-1/4" Diameter Offset Standoffs Square Groove Ends.

Trimco’s AP400 Series Ladder Pulls (formerly 1160/1170 Series) add style and sophistication to any opening. A multitude of options enable customization and flexibility to enhance surrounding building aesthetics.

Buy the TRIMCO AP428 Series today to add a stylish hardware for your home!

TRIMCO AP400 DIAMETER ARCHITECTURAL LADDER PULL OFFSET STANDOFFS SQUARE GROOVE ENDS PRODUCT FEATURES

  • Manufactured from stainless steel, bronze, brass or aluminum for long lasting durability
  • Flexibility in design from straight or offset pulls to square or radius ends
  • Wide range of lengths available from 12″ to over 9′.
  • Available in most architectural finishes
  • Multiple mounting options for metal, wood and glass doors
  • ADA Compliant
  • Optional: Engraving for Singe Pulls or Back to Back (BTB) Pulls
  • Optional: Leather Wrapped
  • If a price is not shown for a particular finish, it may be available at the special price or by special quotation if quantaties warrant. Minimum quantities may apply.

TRIMCO AP428 SERIES COLOR VARIATIONS

Trimco AP428 1-1/4" Diameter Architectural Ladder Pull Offset Standoffs Square Groove Ends Bright Brass (605)
Trimco AP428 1-1/4" Diameter Architectural Ladder Pull Offset Standoffs Square Groove Ends Satin Brass (606)
Trimco AP428 1-1/4" Diameter Architectural Ladder Pull Offset Standoffs Square Groove Ends Bright Bronze (611)
Trimco AP428 1-1/4" Diameter Architectural Ladder Pull Offset Standoffs Square Groove Ends Satin Bronze (612)
Trimco AP428 1-1/4" Diameter Architectural Ladder Pull Offset Standoffs Square Groove Ends Oil Rubbed Bronze (613)
Trimco AP428 1-1/4" Diameter Architectural Ladder Pull Offset Standoffs Square Groove Ends Dark Oxidized Satin Bronze (613E)
Trimco AP428 1-1/4" Diameter Architectural Ladder Pull Offset Standoffs Square Groove Ends Matte Black (622)
Trimco AP428 1-1/4" Diameter Architectural Ladder Pull Offset Standoffs Square Groove Ends Bright Chrome (625)
Trimco AP428 1-1/4" Diameter Architectural Ladder Pull Offset Standoffs Square Groove Ends Satin Chrome (626)
Trimco AP428 1-1/4" Diameter Architectural Ladder Pull Offset Standoffs Square Groove Ends Satin Aluminum (628)
Trimco AP428 1-1/4" Diameter Architectural Ladder Pull Offset Standoffs Square Groove Ends Bright Stainless Steel (629)
Trimco AP428 1-1/4" Diameter Architectural Ladder Pull Offset Standoffs Square Groove Ends Satin Stainless Steel (630)
Trimco AP428 1-1/4" Diameter Architectural Ladder Pull Offset Standoffs Square Groove Ends Bright Stainless Steel (316P)
Trimco AP428 1-1/4" Diameter Architectural Ladder Pull Offset Standoffs Square Groove Ends Satin Stainless Steel (316S )
Trimco AP428 1-1/4" Diameter Architectural Ladder Pull Offset Standoffs Square Groove Ends Healthy Hardware Steralloy Silver (710CU)
Trimco AP428 1-1/4" Diameter Architectural Ladder Pull Offset Standoffs Square Groove Ends Special Finish (SF)

APPLICATIONS 

  • Commercial & Industrial Buildings
  • Government & Military Facilities
  • Hospitality
  • Multifamily & Mixed-Use
  • Retail & Strip Malls

TRIMCO AP400 SERIES COLLECTION

Trimco AP411 1" Diameter Architectural Ladder Pull Straight Standoffs Square End
Trimco AP412 1" Diameter Architectural Ladder Pull Straight Standoffs Radius Ends
Trimco AP413 1" Diameter Architectural Ladder Pull Offset Standoffs Square Ends
Trimco AP414 1" Diameter Architectural Ladder Pull Offset Standoffs Radius Ends
Trimco AP415 1" Diameter Architectural Ladder Pull Straight Standoffs Angled Ends
Trimco AP416 1" Diameter Architectural Ladder Pull Offset Standoffs Angled Ends
Trimco AP417 1" Diameter Architectural Ladder Pull Straight Standoffs Square Groove Ends
Trimco AP418 1" Diameter Architectural Ladder Pull Offset Standoffs Square Groove Ends
Trimco AP421 1-1/4" Diameter Architectural Ladder Pull Straight Standoffs Square Ends
Trimco AP422 1-1/4" Diameter Architectural Ladder Pull Straight Standoffs Radius Ends
Trimco AP423 1-1/4" Diameter Architectural Ladder Pull Offset Standoffs Square Ends
Trimco AP424 1-1/4" Diameter Architectural Ladder Pull Offset Standoffs Radius Ends
Trimco AP425 1-1/4" Diameter Architectural Ladder Pull Straight Standoffs Angled Ends
Trimco AP426 1-1/4" Diameter Architectural Ladder Pull Offset Standoffs Angled Ends
Trimco AP427 1-1/4" Diameter Architectural Ladder Pull Straight Standoffs Square Groove Ends
Trimco AP428 1-1/4" Diameter Architectural Ladder Pull Offset Standoffs Square Groove Ends
Trimco AP431 1-1/2" Diameter Architectural Ladder Pull Straight Standoffs Square Ends
Trimco AP432 1-1/2" Diameter Architectural Ladder Pull Straight Standoffs Radius Ends
Trimco AP433 1-1/2" Diameter Architectural Ladder Pull Offset Standoffs Square Ends
Trimco AP434 1-1/2" Diameter Architectural Ladder Pull Offset Standoffs Radius Ends
Trimco AP435 1-1/2" Diameter Architectural Ladder Pull Straight Standoffs Angled Ends
Trimco AP436 1-1/2" Diameter Architectural Ladder Pull Offset Standoffs Angled Ends
Trimco AP437 1-1/2" Diameter Architectural Ladder Pull Straight Standoffs Square Groove Ends
Trimco AP438 1-1/2" Diameter Architectural Ladder Pull Offset Standoffs Square Groove Ends

RESOURCES & DOWNLOADS

Manufacturer Resources

Product Specs

ADA Compliant:
Yes
Commercial/Residential:
Commercial
Product Group:
Door Trim and Accessories
Product Subgroup:
Door Pulls, Push and Pull Plates
Product Type:
Door Pulls
Series:
AP400 Series
Subcategory:
Door Pulls, Push and Pull Plates
Fasteners:
Wood and Machine Screws
Product Diameter:
1-1/4"
Product Dimension:
1-1/4" Diameter
Product Category:
Door Trim and Accessories
Product Substrate:
Stainless Steel
Collection:
AP400 Series
Department:
Door Hardware

Trimco TRI-AP428E-128.605 – Frequently Asked Questions

1) What is the difference between E-Mount and G-Mount on Trimco AP400 ladder pulls?
Mounting is a choice you make when ordering the AP428: E-Mount or G-Mount. Trimco publishes a separate drilling template for each (the AP400E and AP400G offset templates), so the door prep differs between them. Pick the mount first, then use the matching template to lay out the hole centers, since the two are not interchangeable once the door is drilled.
2) Is the Trimco AP428 pull ADA compliant for a commercial entrance?
Yes, the AP428 is ADA compliant, and it is a commercial-duty pull rather than a residential one. The ladder form gives a continuous graspable bar that needs no tight pinching or wrist twisting, which is what the accessibility requirement is driving at on an entry door.
3) Can Trimco AP400 ladder pulls be mounted on glass doors?
The AP400 Series is offered with mounting options for metal, wood and glass doors. For a glass front you must confirm the glass is already fabricated with the correct hole pattern, since tempered glass cannot be drilled after the fact, and lay the holes out from the Trimco template that matches your mount type.
4) I replaced an older Trimco 1160 or 1170 pull, is the AP400 the same thing?
Yes. Trimco's AP400 Series ladder pulls are the former 1160/1170 Series, so the AP428 is the current designation within that family. Verify your length, diameter and mounting type when reordering, since those are specified separately.
5) I need a straight ladder pull, not an offset one. What should I order instead of the AP428?
The AP428 uses offset standoffs, so the bar sits away from the door on angled posts. If the opening calls for a straight bar mounted on posts perpendicular to the door face, the ABH AB3300 straight flat end pull handle at 1 inch diameter or the ABH AB7200 solid stainless steel flat end pull at 7/8 inch diameter with through-bolt mounting are the straight-bar options. From Ives, the 8102HD is a heavy duty straight pull with a 3/4 inch round bar and 1-1/2 inch clearance, and the 8103HD is a heavy duty straight pull with a 1 inch round bar and through bolt mounting. All of these are smaller bar diameters than the 1-1/4 inch AP428, so the grip feel will differ.
6) What is the closest equivalent to a Trimco AP428 offset ladder pull from another manufacturer?
The Trimco AP428 is a 1-1/4 inch diameter offset-standoff ladder pull with square groove ends, ordered in lengths from 12 inches up to 96 inches. The nearest cross-brand equivalent in offset geometry is the ABH AB3310 offset flat end door pull, a commercial surface mount pull, and the ABH AB3330 offset round end pull, which is offered with custom length options. Ives also builds offset pulls in the same family of openings: the 8169 is a C style offset solid pull at 1 inch diameter, and the 8145EZHD is a 45 degree offset pull with heavy duty mounting hardware. The differences to check before substituting are bar diameter, end treatment, and whether the length you need is a stocked size or a made-to-length item.
7) What diameter is the Trimco AP428 bar, and how does it compare to the other AP400 pulls?
The AP428 bar is 1-1/4 inch diameter. Trimco runs the same AP400 shapes at three diameters, so if you want a lighter look the 1 inch offset square groove version is the AP418, and for a heavier one the 1-1/2 inch version is the AP438. All three share the same design language, which matters when you are standardizing pulls across a building but want different scale on different openings.
8) What are my alternatives if I need a smaller diameter or a back-to-back offset pull instead of the AP428?
For a slimmer bar in an offset commercial pull, the ABH AB3310 offset flat end and the ABH AB3330 offset round end are options, and the Ives 8169 C style offset pull is a 1 inch diameter offset. If you want a matched pair on both faces of the door, the Deltana SSPOBB24 is a 24 inch back-to-back modern offset set and the SSPORBB24 is the round offset version. Those Deltana sets are fixed-length, so they will not cover the tall 72 to 96 inch openings the AP428 range reaches.
9) Is a Deltana back-to-back offset pull a substitute for the Trimco AP428?
Only for a narrow case. The Deltana SSPOBB24 is a 24 inch back-to-back modern offset door pull and the SSPORBB24 is a 24 inch back-to-back round offset pull, both fixed at one length and supplied as a pair for a single door. The AP428 is ordered by length across 12, 18, 24, 36, 48, 60, 72, 84 and 96 inches and by mounting style, so it covers full-height glass and entrance openings the fixed 24 inch Deltana sets do not. If your opening is a 24 inch pair on a single door, the Deltana back-to-back sets are a direct answer; for anything longer or for single-side mounting, stay with the AP428.
10) What finishes is the Trimco AP428 ladder pull available in?
Thirteen finishes are offered: 316P and 316S bright and satin stainless, 605 bright brass, 606 satin brass, 609 blackened satin brass, 611 bright bronze, 612 satin bronze, 613 oil rubbed bronze, 613E dark oxidized satin bronze, 622 matte black, 628 satin aluminum, 629 bright stainless and 630 satin stainless. If you are matching existing hardware in a building, match by the BHMA number rather than the finish name, since several of them look close in a photo.
11) What is the AP428 pull made of?
Stainless steel is the listed substrate for the AP428, and the AP400 Series is produced in stainless, bronze, brass or aluminum depending on the finish selected. Stainless is the usual pick for exterior entrances and high-traffic lobbies where corrosion and cleaning chemicals are a factor.
12) Can I get the AP428 ladder pull engraved or leather wrapped?
Both are optional on the AP400 Series. Engraving is available for single pulls or back to back (BTB) pulls, and leather wrapping is offered as well. Those are custom treatments specified at order time, so settle the length, diameter and finish first.
How fast can I get the Trimco TRI-AP428E-128.605 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Trimco TRI-AP428E-128.605 come with a warranty?
Absolutely. The Trimco TRI-AP428E-128.605 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Trimco TRI-AP428E-128.605?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Trimco TRI-AP428E-128.605 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!