You may also like
UNINS FORK TERM 12-10 No8
Manufacturer Resources
Product Specs
- Country Of Origin:
- United States (US)
- Product Subgroup:
- General Terminals
- Product Type:
- Non-Insulated Fork Terminal
- Standards:
- UL E9809
- Voltage Rating:
- 600 V
- Wire Size:
- 12-10 AWG
- Department:
- Electrical
- Product Group:
- Wire Termination
- Product Color:
- Metallic
- Product Material:
- Copper
Sta-Kon C114 – Frequently Asked Questions
1) What wire size does the Sta-Kon C114 fork terminal take?
The C114 is sized for 12-10 AWG conductors. That covers the typical 12 and 10 gauge branch-circuit and control wiring you'd be landing on a panel or device screw. Anything smaller than 12 AWG will not crimp reliably in this barrel, so step down to a terminal rated for 16-14 AWG for those runs.
2) Will a Sta-Kon C114 fork terminal fit a No. 8 screw?
Yes, the C114 fork is made for a No. 8 stud or screw. The open spade slides under a loosened No. 8 terminal screw instead of requiring you to pull the screw out, which is why electricians use forks on crowded terminal strips and device blocks.
3) Is this fork terminal insulated, and does that matter for my application?
It is a non-insulated terminal, bare copper with a metallic finish. On a tight terminal block that is usually what you want, since there is no nylon or vinyl sleeve adding bulk. If you need strain relief or phase color coding at the crimp, use an insulated fork instead or sleeve the barrel with heat shrink after crimping.
4) Does the C114 terminal meet UL requirements for an inspected installation?
It is listed under UL E9809, which is the reference an inspector or a spec writer will look for on a terminal. The C114 is also made in the United States if your project carries a domestic-sourcing requirement.
5) Should I use a fork terminal or a ring terminal for landing wire on a terminal screw?
A fork, like the C114, has an open slot so it slips under a loosened screw without removing the screw or breaking down the connection. That makes it fast for panel work and for anything you expect to service. A ring terminal is closed, so the screw has to come all the way out, but it cannot vibrate off the stud. For motor leads, vehicle work, or anything with vibration, go with a ring; for terminal strips and control panels the fork is the practical choice.
6) Can I use the C114 on aluminum wire?
No. The C114 barrel is copper and is intended for copper conductors. For aluminum or copper-clad aluminum you need a connector specifically marked AL or AL9CU, otherwise you risk a galvanic and thermal failure at the joint.
7) What crimp tool do I need for a bare copper Sta-Kon fork terminal?
Being a non-insulated copper barrel, the C114 needs a crimper with a non-insulated (open or oval nest) die set, not the colored insulated-terminal nests. Use the die station matched to 12-10 AWG. Pliers or an insulated-terminal jaw will give you a loose or distorted crimp on a bare barrel.
8) What part number do I order for the Sta-Kon 12-10 AWG No. 8 uninsulated fork?
Order Sta-Kon model C114. That single part number covers the 12-10 AWG, No. 8 stud, non-insulated fork configuration.
How fast can I get the Sta-Kon C114 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon C114 come with a warranty?
Absolutely. The Sta-Kon C114 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon C114?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon C114 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.