You may also like
UNINS FORK TERM 18-14 No8
Manufacturer Resources
Product Specs
- Country Of Origin:
- United States (US)
- Product Subgroup:
- General Terminals
- Product Type:
- Non-Insulated Fork Terminal
- Standards:
- UL E9809
- Voltage Rating:
- 600 V
- Wire Size:
- 18-14 AWG
- Department:
- Electrical
- Product Group:
- Wire Termination
- Product Color:
- Metallic
- Product Material:
- Copper
Sta-Kon B65TB – Frequently Asked Questions
1) What wire sizes does the Sta-Kon B65TB fork terminal crimp?
The B65TB non-insulated fork terminal takes 18-14 AWG conductor, so it covers the usual 18, 16, and 14 gauge control and fixture wire on one part number. Below 18 AWG or above 14 AWG you need a different barrel size.
2) What screw size does this Sta-Kon fork terminal fit?
The B65TB is sized for a No. 8 screw or stud. The forked (spade) tongue slides around the screw without removing it, which is why these get used on terminal strips and device screws where a ring terminal would mean backing the screw all the way out.
3) Is the B65TB rated for 600 volt control wiring?
Yes, it carries a 600 V rating and is UL recognized under file E9809. That covers typical 120/277 V lighting and 600 V class control circuits.
4) Does this terminal come with insulation, or do I need to sleeve it?
It's a bare, non-insulated copper terminal with no insulating sleeve or color-coded barrel. If the connection needs covering, plan on heat shrink or a nylon insulator, or order an insulated fork terminal in the same 18-14 AWG range instead.
5) Should I use a fork terminal or a ring terminal on a terminal block?
Use the fork, like the B65TB, when you want to land or pull a wire without fully removing the No. 8 screw, which is most terminal strips, contactors, and device terminals that get serviced. Use a ring terminal when vibration or a captive connection matters, since a ring cannot slip off a loosened screw. Both land on the same screw size.
6) What material is the B65TB made from, and will it work on aluminum wire?
The barrel is copper, with a metallic (unplated bare metal) finish. That makes it a copper-conductor-only terminal; aluminum conductors need a terminal rated AL or AL/CU, not this one.
7) Is the Sta-Kon B65TB made in the USA?
Country of origin is the United States, which matters if you're filling a government, school, or transit order with domestic-content language on it.
8) What part number do I order for a Sta-Kon uninsulated 18-14 AWG No. 8 fork terminal?
Order Sta-Kon B65TB. That is the manufacturer part number for the uninsulated fork tongue terminal, 18-14 AWG barrel, No. 8 stud.
How fast can I get the Sta-Kon B65TB delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon B65TB come with a warranty?
Absolutely. The Sta-Kon B65TB is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon B65TB?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon B65TB from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.