You may also like
UNINS FORK TERM 18-14 No6
Manufacturer Resources
Product Specs
- Country Of Origin:
- United States (US)
- Product Subgroup:
- General Terminals
- Product Type:
- Non-Insulated Fork Terminal
- Standards:
- UL E9809
- Voltage Rating:
- 600 V
- Wire Size:
- 18-14 AWG
- Department:
- Electrical
- Product Group:
- Wire Termination
- Product Color:
- Metallic
- Product Material:
- Copper
Sta-Kon B64 – Frequently Asked Questions
1) What wire sizes does the Sta-Kon B64 fork terminal accept?
The B64 is sized for 18-14 AWG conductors. That one barrel covers the three common control-wiring gauges, so a panel built with 16 AWG and a few 14 AWG runs can be terminated with a single terminal and a single crimp die rather than two part numbers.
2) What screw size does the B64 fork terminal fit?
It is a No. 6 stud fork, so it slides under a #6 screw or terminal-block stud. On a larger #8 or #10 screw the fork tongue will not seat properly against the shoulder, and on anything smaller than #6 the fork can pull free, so match the stud size before you crimp a run of them.
3) Does the B64 need insulation, or is it already insulated?
It is a non-insulated terminal, bare copper with no sleeve. On anything inside an enclosure where conductors could touch a grounded surface or an adjacent stud, you either add heat shrink over the barrel or buy an insulated fork instead. Bare is the right choice when you need to see the crimp for inspection or when the terminal block already has barriers between poles.
4) Can I use the Sta-Kon B64 on 600 volt control circuits?
Yes. The B64 carries a 600 V rating, which covers 480Y/277 and 208/120 control and power wiring in commercial panels, as well as low-voltage HVAC and signaling runs.
5) Is the B64 terminal UL listed?
The B64 fork terminal is covered under UL file E9809. If your inspector or spec requires UL recognized terminations on a listed panel, that file number is what you cite.
6) Fork terminal or ring terminal for a terminal strip, which should I use?
A fork like the B64 slides in from the side, so you only have to back the #6 screw out a turn or two to land or remove a wire. That makes it the faster choice on crowded terminal strips and on anything you expect to service. A ring terminal has to come off the stud entirely, but it cannot vibrate loose sideways, so it is the better pick on motors, equipment subject to vibration, and anywhere a code or spec calls for a captive termination.
7) Is the Sta-Kon B64 solid copper, and does that matter for aluminum wire?
The barrel is copper, which means it is intended for copper conductors only. Crimping copper onto aluminum wire creates a dissimilar-metal joint that corrodes and loosens over time, so for aluminum runs you need a terminal specifically rated AL9CU or AL/CU.
8) Is the Sta-Kon B64 made in the USA?
Yes, country of origin is the United States. That is the line to point at on federal, state, or institutional jobs carrying Buy American or domestic-preference language for electrical materials.
How fast can I get the Sta-Kon B64 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon B64 come with a warranty?
Absolutely. The Sta-Kon B64 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon B64?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon B64 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.