You may also like
UNINS TUB RNG TRM 1/0AN-2/0 BLT 5/8
Manufacturer Resources
Product Specs
- Country Of Origin:
- Mexico (MX)
- Product Subgroup:
- General Terminals
- Product Type:
- Non-Insulated Ring Terminal
- Wire Size:
- 1/0AN-2/0
- Department:
- Electrical
- Product Group:
- Wire Termination
- Product Material:
- Copper
Sta-Kon J976 – Frequently Asked Questions
1) What wire size does the Sta-Kon J976 ring terminal take?
The J976 is sized for 1/0 AWG through 2/0 AWG conductor. It's a tubular barrel lug, so the stripped conductor seats inside the barrel and gets crimped. If your feeder is 3/0 or larger, or you're down at 1 AWG and smaller, you need a different lug in the series rather than forcing this barrel.
2) Is the Sta-Kon J976 lug copper or aluminum?
Copper. That makes it a copper-conductor-only termination, so don't use it on aluminum feeder unless a listing specifically permits it. Copper barrels also mean you should follow the die and tool combination the manufacturer calls out for the 1/0 to 2/0 range rather than a generic hex die.
3) Is the Sta-Kon J976 terminal insulated?
No. It's a bare, non-insulated tubular ring terminal, so the barrel and tongue are exposed metal once crimped. On a feeder termination inside an enclosure that's usually what you want, but if the lug lands near a grounded surface or another phase you'll need to add heat shrink or an insulating boot yourself.
4) Can I use the Sta-Kon J976 as a grounding or bonding lug on a 2/0 ground conductor?
Mechanically it suits that job: copper barrel, 1/0 to 2/0 conductor range, and a 5/8 inch tongue hole that matches large ground bus and structural bonding studs. Check that your inspector accepts a crimp compression lug for the bonding application in question, since it's the installed listing and not the lug's size that governs there.
5) Do I need a crimping tool for the Sta-Kon J976, or can it be bolted on like a mechanical lug?
It's a compression lug, not a set-screw mechanical connector. The conductor goes into the tubular barrel and is crimped with a hydraulic or heavy-duty crimper; there's no screw to torque on the wire end. The only torqued connection is the 5/8 inch bolt through the tongue. If you want a lug you can land with a hex key and no crimper, a mechanical set-screw lug for 1/0 to 2/0 is the different product to look for.
How fast can I get the Sta-Kon J976 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon J976 come with a warranty?
Absolutely. The Sta-Kon J976 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon J976?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon J976 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.