View All Falcon Door Hardware

Falcon SC71A-3071DEL Delay cylinder (DEL) for SC70A Series Door Closers

Falcon SC80A-18 Mounting plate - Top jamb for SC80A Series Door Closers

Falcon SC81A-18FC Mounting Plate - Top Jamb Full Cover (FULLCOV) for SC81A Series Door Closers

Falcon SC80A-18PAFC Mounting plate PA for full cover for SC80A Series Door Closers Plate, SC80A-18PAFC Required for parallel arm mounting where top rail is less than 4 3⁄8" (111mm), measured from the stop. Plate requires 1 7 ⁄8" (48mm)...

Falcon SC80A-30 Cush shoe support for SC80A Series Door Closers Soffit shoe support, SC80A-30 Provides anchorage for fifth screw used with soffit shoe, where reveal is less than 3 1 ⁄16" (78mm).

Falcon SC81A-3049DS Hold-Open Dead Stop Parallel Arm (DSHO) for SC81A Series Door Closers  

Falcon SC81A-3077DS Dead Stop Parallel Arm (DS) for SC81A Series Door Closers  

Falcon SC81A-3077SS Spring-n-stop Arm (SS) for SC81A Series Door Closers  

Falcon SC81A-61 Blade Stop Spacer for SC81A Series Door Closers  

Falcon SC81A-62A Offset Auxiliary Shoe for SC81A Series Door Closers      

Falcon SC80A-72FC Full cover (FULLCOV) for SC80A Series Door Closers

Falcon SC81A-30 Cush shoe support for SC81A Series Door Closers Soffit shoe support, SC81A-30 Provides anchorage for fifth screw used with soffit shoe.

Falcon SC81A-3071 Standard cylinder (CYL) for SC80A Series Door Closers

Falcon SC81A-3071DEL Delay cylinder (DEL) for SC80A Series Door Closers

Falcon SC90A-18 Mounting plate - Top jamb for SC90A Series Door Closers Plate, SC90A-18 Required for top jamb mounting where head frame is less than 1 3⁄4" (44mm) or flush ceiling conditions exists.

Falcon SC90A-18PA Mounting plate - Push side for SC90A Series Door Closers Required for parallel arm mounting where top rail is less than 4 5⁄8" (117 mm), measured from the stop. Plate requires 2 1⁄8" (54mm) minimum top rail measured from...

Falcon Standard screw pack for SC60A/80A Series Door Closers

Factory Default AttributesLatch: 23981145: Deadlatch - 2-3/4" Backset - Square corner, 1-1/8" x 2-1/4"Strike: 5164: ANSI 1-1/4" x 4-7/8"Door thickness: 1-3/4".Strike lip length: 1-3/16".Keying (for P, and P6): KD:Keyed different.Keys (for P, and P6): Two...

MA Series Grade 1 Mortise Locks Provides security and is built to stand up to constant use without fail. Door thickness: Standard accommodates thickness of 1-3/8” to 2-1/2”. Backset: 2-3/4” only. Case: Cold formed...

The X Series heavy-duty cylindrical knob lock features optional XC construction that combines a stainless steel and nonferrous-built chassis with stainless steel trim to resist corrosion when exposed to moisture and salt. It is ideal for government and...

Falcon OHC100A-EL "A" Style End Load arm for OHC100 Series Door Closers “A” arm, OHC100A-EL, OHC100A-EL Non-handed arm, end load, center hung, steel forge.