You may also like
VINYL RING TERM 8 AWG 10 BOLT 90DEG
Manufacturer Resources
Product Specs
- Country Of Origin:
- Mexico (MX)
- Product Subgroup:
- Lugs & Terminals
- Product Type:
- 90 Degree Ring Terminal
- Wire Size:
- 8 AWG
- Department:
- Electrical
- Product Group:
- Wire Connectors & Terminals
- Product Color:
- Red
- Product Material:
- Vinyl
Sta-Kon RDV367U – Frequently Asked Questions
1) What wire size does the Sta-Kon RDV367U ring terminal take?
The RDV367U is built for 8 AWG conductor. One wire of 8 AWG per barrel. If your conductor is 10 or 12 AWG, this barrel is too large to crimp reliably and you want a terminal rated for that smaller range instead.
2) Why would I use a 90 degree ring terminal instead of a straight one?
The 90 degree bend turns the wire run perpendicular to the stud face, so the conductor exits sideways rather than straight back off the post. That matters in shallow enclosures, tight panel gutters, and on terminal blocks where a straight terminal would force a sharp bend in 8 AWG wire right at the barrel. If you have room behind the stud to run the conductor straight out, a flat ring terminal is the simpler choice.
3) Is the insulation on this Sta-Kon ring terminal vinyl or nylon?
Vinyl. The RDV367U uses a vinyl insulating sleeve over the barrel, colored red. Vinyl is the standard general purpose insulation for panel and control work; if your job calls for nylon because of higher heat or abrasion in the raceway, specify a nylon insulated terminal instead.
4) Do I need a special crimp tool for an 8 AWG insulated ring terminal?
Yes. An 8 AWG barrel is past the range of the common hand crimpers used for 22 to 10 AWG insulated terminals. You need a tool with a die sized for 8 AWG insulated terminals, typically a heavy hand crimper or a ratchet tool with the correct nest. The crimper is not supplied with the terminal.
5) Does the red color on the RDV367U mean anything, or is it just the insulation?
It identifies the wire range, not a circuit function. On insulated Sta-Kon terminals the sleeve color maps to conductor size, and red here goes with the 8 AWG barrel. Don't use it to code phase or polarity, and don't assume a red terminal from another series takes 8 AWG.
6) Where are Sta-Kon RDV367U terminals made?
Country of origin is Mexico. Useful if you are filing submittals or buying against a sourcing requirement on an institutional job.
How fast can I get the Sta-Kon RDV367U delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon RDV367U come with a warranty?
Absolutely. The Sta-Kon RDV367U is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon RDV367U?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon RDV367U from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.