You may also like
INS VINYL RING TERM, 6 AWG, 3/8, BL
Manufacturer Resources
Product Specs
- Country Of Origin:
- United States (US)Mexico (MX)
- Product Subgroup:
- General Terminals
- Product Type:
- Vinyl Insulated Ring Terminal
- Standards:
- UL E9809
- Voltage Rating:
- 600 V
- Wire Size:
- 6 AWG
- Department:
- Electrical
- Product Group:
- Wire Termination
- Product Color:
- Blue
- Product Material:
- Copper
Sta-Kon REV737 – Frequently Asked Questions
1) What wire size does the Sta-Kon REV737 ring terminal take?
The REV737 is sized for 6 AWG conductor only. Pairing it with smaller wire leaves the barrel under-filled and the crimp won't hold, so step down to a terminal rated for the gauge you're actually landing.
2) Will a 3/8 inch stud or bolt fit the Sta-Kon REV737 ring?
Yes. The REV737 ring tongue is made for a 3/8 inch stud, so it lands on 3/8 bus bars, breaker lugs, and ground studs without enlarging the hole.
3) Is the Sta-Kon REV737 terminal copper or aluminum?
Copper barrel with a vinyl insulating sleeve. That makes it a copper-conductor terminal, so use it on copper 6 AWG, not on aluminum feeder, which needs a dual-rated AL9CU connector and inhibitor compound.
4) Is this 6 AWG ring terminal rated for 600 volt circuits?
The REV737 carries a 600 V rating, which covers standard commercial branch circuits, panel terminations, and motor connections up to 600 volts.
5) Is the Sta-Kon REV737 UL listed for inspected commercial work?
It carries UL file E9809, which is what an inspector or a spec writer on an institutional job will want referenced for the termination.
6) Why is this ring terminal blue, and does the color mean anything?
Blue vinyl here is Sta-Kon's own insulation color for this part. Note that on the common small-gauge color code blue means 16-14 AWG, so don't size off color habit: the REV737 is a 6 AWG terminal. Read the stamped size or the part number, not the sleeve color.
7) Should I use a ring terminal or a spade terminal for a 6 AWG panel connection?
Use the ring. A ring tongue like the REV737 captures the 3/8 stud completely, so the connection can't slip off if the nut backs away under vibration. A spade or fork is only worth it where you need to pull the lead without fully removing the hardware, and on a 6 AWG power termination that convenience isn't worth the risk.
8) Where is the Sta-Kon REV737 terminal manufactured?
Production is sourced from the United States and Mexico, which matters if you're filing country-of-origin documentation on a government or federally funded job.
9) What part number do I order for a 6 AWG, 3/8 stud insulated ring terminal from Sta-Kon?
REV737 is the manufacturer part number. One model covers the combination, so there's no finish, length, or packaging choice to specify beyond quantity.
How fast can I get the Sta-Kon REV737 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon REV737 come with a warranty?
Absolutely. The Sta-Kon REV737 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon REV737?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon REV737 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.