You may also like
INS VINYL RING TERM, 6 AWG, 1/2, BL
Manufacturer Resources
Product Specs
- Country Of Origin:
- United States (US)
- Product Subgroup:
- General Terminals
- Product Type:
- Vinyl Insulated Ring Terminal
- Standards:
- UL E9809
- Voltage Rating:
- 600 V
- Wire Size:
- 6 AWG
- Department:
- Electrical
- Product Group:
- Wire Termination
- Product Color:
- Blue
- Product Material:
- Copper
Sta-Kon REV757 – Frequently Asked Questions
1) What wire size and stud size does the Sta-Kon REV757 ring terminal take?
The REV757 is built for 6 AWG conductor and a 1/2 inch stud or bolt. Pairing it with anything smaller than 6 AWG leaves the barrel under-filled and the crimp won't hold, and the 1/2 inch ring won't seat on a smaller terminal post without slop. Match both numbers, wire and stud, before you crimp.
2) Is the REV757 ring terminal rated for 600 volt circuits?
Yes, the vinyl insulation on the REV757 carries a 600 V rating, which covers standard commercial branch circuits, panel and motor terminations. It is also UL listed under file E9809.
3) Is the barrel on this Sta-Kon ring terminal copper or aluminum?
Copper. That makes the REV757 a copper-conductor-only terminal, so use it on 6 AWG copper wire. Aluminum feeders need an AL9CU rated lug instead, not a copper crimp terminal.
4) Do I need a special crimp tool for a 6 AWG insulated ring terminal?
At 6 AWG this is heavy-gauge territory. A hand-held insulated-terminal plier sized for 22-10 AWG will not close this barrel; you need a crimper rated for 6 AWG copper lugs, typically a long-handle or hydraulic/ratchet die tool. The insulated vinyl body means you crimp over the barrel and leave the sleeve intact.
5) What is the exact manufacturer part number to order this Sta-Kon terminal?
Order it as Sta-Kon REV757. That single part number covers the 6 AWG, 1/2 inch stud, blue vinyl insulated ring terminal, with no handing, length or finish options to specify.
6) Should I use a ring terminal or a fork terminal on a 1/2 inch stud?
A ring terminal like the REV757 has to be slid over the stud, so the nut comes all the way off during install, but it cannot vibrate off under a loosening nut. A fork or spade slips in sideways for faster service work and is the choice where you swap leads often. For a 6 AWG feeder landing on a 1/2 inch post in equipment that sees vibration, the closed ring is the safer termination.
7) Is this ring terminal made in the USA?
Country of origin on the Sta-Kon REV757 is the United States, which is what you want on hand if you're bidding federal or institutional work with domestic sourcing language in the spec.
How fast can I get the Sta-Kon REV757 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon REV757 come with a warranty?
Absolutely. The Sta-Kon REV757 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon REV757?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon REV757 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.