Von Duprin Grade 1 Concealed Vertical Cable Exit Bar, 36" Device, 72" to 84" Door Height, Exit Only, Cylinder Dogging, Less Cylinder, Satin Chrome Finish, Field Reversible
Manufacturer Resources
Product Specs
- Department:
- Door Hardware
- Product Group:
- Exit Devices and Trim
- Product Subgroup:
- Exit Devices - Vertical Rod
- Product Type:
- Concealed Vertical Cable Exit Device
Von Duprin CD9850WDCEO 3 26D – Frequently Asked Questions
1) Will the Von Duprin CD9850WDCEO concealed vertical cable exit device work on a pair of doors without a mullion?
Yes. The CD9850WDCEO is a concealed vertical cable device, so it latches at the head and the threshold rather than at a strike on the door edge. That means a pair of doors can be secured without a center mullion, and both leaves stay free-swinging. If you need a device that latches into a mullion or a rim strike instead, a rim exit device is the other route.
2) What door height does the 36 inch CD9850 concealed vertical cable device cover?
This one is built for doors 72 to 84 inches tall, with a 36 inch device (bar) length. Taller openings need a different cable/rod length option, so confirm the leaf height before you order.
3) Does the CD9850WDCEO exit device have outside trim or a lever for re-entry?
No. CEO stands for exit only, so there is no outside trim, lever, or pull supplied or prepped for. Push the bar and you are out; you cannot get back in through that door. For openings where staff need to key back in, you want a device ordered with a cylinder-and-lever night latch trim instead.
4) Do I need to order a cylinder separately for the CD9850WDCEO cylinder dogging exit bar?
Yes. The device ships less cylinder. Cylinder dogging requires a mortise cylinder to hold the push bar depressed for push/pull free operation during business hours, and that cylinder is a separate line item keyed to your system.
5) Is cylinder dogging allowed on a fire rated opening?
No. Mechanical or cylinder dogging is not permitted on fire rated doors, because the latch must stay projected to keep the opening latched. The CD9850WDCEO is ordered with cylinder dogging, which puts it on non-rated openings. For a rated pair you need the fire rated version of the device, which comes without dogging.
6) What is the difference between a concealed vertical cable exit device and a surface vertical rod device?
Both latch top and bottom, so either one handles a pair of doors with no mullion. The difference is where the hardware lives. A concealed vertical cable device like the CD9850 runs its cables inside the door, so nothing is exposed on the face of the leaf, but the door has to be prepped for it, which realistically means a factory-prepped door. A surface vertical rod device mounts rods on the face of the door and can be installed on an existing leaf with far less prep. Pick concealed for appearance and for glass or aluminum entrances where the prep already exists; pick surface rod for retrofit.
7) Is the CD9850 exit device handed, or can I use it on either a left or right hand door?
It is field reversible, so one device covers both hands. You set the handing during installation rather than ordering left or right, which is useful if you are stocking spares for a building with doors swinging both ways.
8) Is the Von Duprin CD9850 heavy duty enough for a high traffic school or hospital exit?
It is a Grade 1 exit device, which is the heaviest ANSI/BHMA duty classification for this hardware and the grade specified for institutional and high traffic openings. That is the grade an MRO or education procurement spec normally calls for on an egress door.
9) Can I install the CD9850WDCEO on a door that is not already prepped for concealed hardware?
Not practically. Concealed vertical cable devices route the cables and top and bottom latch mechanisms inside the leaf, so the door needs the internal prep and reinforcement for it. If the existing doors are blank or prepped for a surface device, order a surface vertical rod or rim device rather than trying to convert the leaf in the field.
10) What finish is the 26D Von Duprin exit bar, and will it match my other door hardware?
26D is satin chrome, the standard dull chrome finish used across most commercial openings. It pairs cleanly with 626 satin chrome cylinders and US26D/626 levers and closers, which is the usual combination in schools, offices and multi-family corridors.
How fast can I get the Von Duprin CD9850WDCEO 3 26D delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Von Duprin CD9850WDCEO 3 26D come with a warranty?
Absolutely. The Von Duprin CD9850WDCEO 3 26D is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Von Duprin CD9850WDCEO 3 26D?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Von Duprin CD9850WDCEO 3 26D from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.