You may also like
WAC Lighting 10" Mylie LED Wall Sconce
An updated classic. Crescent styled element with up and down light perfect for over a vanity, a console or bedside. Energy efficient integrated LED's provide a long-lasting maintenance-free bright and even illumination. Front light and downlight for close to wall illumination.- Mouth blown opal etched glass.
- Front light and downlight for close to wall illumination.
- AC LED (no transformer or driver needed for ease of installation over any junction box). 277V available by special order.
- Smooth and continuous dimming with an electronic low voltage (ELV) dimmer.
Manufacturer Resources:
Manufacturer Resources
Product Specs
- Bulb Base:
- Integrated LED
- Bulbs Included:
- Yes
- Collection:
- Mylie
- Dimmable:
- ELV
- Hardwired or Portable:
- Hardwired
- Lumens:
- 890
- Product Type:
- Bath Vanity & Wall Light
- Shade/Glass Description:
- Opal Etched Glass
- Warranty:
- 5 Years Functional, 2 Years Finish
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Vanity Lights
- ADA Compliant:
- Yes
- Number of Bulbs:
- 1
- Avg Rated Hours:
- 54000
- Base Material:
- Steel
- Location Rating:
- Damp
- Brand Family:
- WAC Standard
- Backplate Length:
- 9.75"
- Energy Star:
- No
- Title 20:
- Yes
- Subcategory:
- Indoor Wall Lighting
- Certification:
- ETL, cETL, IP44
- Glass Finish:
- Opal Etched Glass
- Location Indoor/ Outdoor:
- Indoor/Outdoor (Covered)
- Shade Material:
- Glass
- Title 24 Compliant:
- Yes
- Bulb Type:
- Integrated LED
- Segment:
- Lighting
- Product Voltage:
- 120V
- Beam Spread Angle:
- Flood
- Light Temperature:
- 3000K
- Mounting Method:
- Wall
- Product Style:
- Traditional
- Product Height:
- 6"
- Product Category:
- Wall Lighting
- Product Width:
- 10"
- Product Wattage:
- 19W
WAC Lighting WAC-WS-27010 – Frequently Asked Questions
1) Can the WAC Mylie WS-27010 sconce be installed over a bathtub or shower area?
The Mylie WS-27010 carries a Damp location rating and an IP44 rating, so it is suited to a bathroom vanity or a covered outdoor spot, not a wet location with direct water contact. Over a vanity or console it is fine; inside a shower enclosure it is not the right fixture.
2) Does the WAC Mylie 10 inch LED sconce need a driver or transformer?
No. It runs on 120V AC LED, so it wires straight to a standard junction box with no remote transformer or driver. A 277V version is available by special order. That makes it a quick swap for an existing hardwired sconce location.
3) What dimmer works with the WAC Mylie LED wall sconce?
Use an electronic low voltage (ELV) dimmer. The Mylie is rated ELV dimmable and gives smooth continuous dimming on that type of control. A standard incandescent/TRIAC wall dimmer is not the specified control, so spec the ELV device with the fixture to avoid flicker or drop-out at the low end.
4) Is the WAC Mylie sconce ADA compliant for a commercial restroom?
Yes, the Mylie WS-27010 is listed ADA compliant, and it is ETL and cETL certified. It is also Title 20 and Title 24 compliant, which matters if you are building in California.
5) How much light does the 10 inch Mylie sconce put out, and is one enough over a vanity?
Each Mylie WS-27010 delivers 890 lumens at 19W in a 3000K warm white with a flood distribution. It throws light forward and down for close-to-wall illumination. Over a single sink most designers run a pair flanking the mirror for even face lighting; one fixture centered above a mirror works but lights from a single direction.
6) What size is the Mylie WS-27010 and will its backplate cover my existing electrical box?
The fixture measures 10 inches wide by 6 inches high, with a 9.75 inch backplate length. That backplate easily covers a standard round or octagonal ceiling/wall box opening, so it will hide the existing cut-in on a retrofit.
7) Do I ever have to relamp the WAC Mylie sconce?
No. The LED is integrated and included, rated at 54,000 average hours, with one light source per fixture. There is no socket and no replaceable lamp, which is the point for multi-family and hospitality where relamping labor adds up.
8) What finishes does the WAC Mylie 10 inch sconce come in?
Two: Aged Brass (WS-27010-AB) and Brushed Nickel (WS-27010-BN). Both use the same mouth blown opal etched glass shade and both are 3000K, so you can mix finishes across a project without a color shift between rooms.
9) Is the Mylie sconce built well enough for hotel or apartment corridors?
The body is steel with a mouth blown opal etched glass shade, hardwired and wall mounted. The etched opal diffuser hides the LED and softens glare, and the traditional crescent form reads fine in guest rooms, corridors and bedside applications, not just baths.
10) Is the WAC Mylie sconce Energy Star certified?
No, the Mylie WS-27010 is not Energy Star listed. It does meet California Title 20 and Title 24, which is the compliance path most West Coast projects are actually checking for on a residential or hospitality bath fixture.
How fast can I get the WAC Lighting WAC-WS-27010 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the WAC Lighting WAC-WS-27010 come with a warranty?
Absolutely. The WAC Lighting WAC-WS-27010 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the WAC Lighting WAC-WS-27010?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the WAC Lighting WAC-WS-27010 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.