WAC Lighting 2.44" Flare LED P...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$400.00
$399.00
WAC Lighting Flare LED Pendant WAC-PD-70937

WAC Lighting 2.44" Flare LED Pendant PD-70937

(No reviews yet) Write a Review

Model: WAC-PD-70937
From the Flare Collection
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$400.00
$399.00
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

WAC Lighting 2.44" Flare LED Pendant PD-70937

Symmetrical, cylindrical and aerodynamic. Brilliance alone or in pairs. Energy efficient integrated LED's provide a long-lasting maintenance-free bright and even illumination. Ultra-sleek electrified cable eliminates the need for clunky power wires. Height is simple to adjust through push pin connectors on the canopy.
  • Extruded acrylic diffuser available in 4 sizes. Cylindrical design. Can be mounted on a slope ceiling.
  • Ultra-sleek electrified cable eliminates the need for clunky power wires. Height is simple to adjust through push pin connectors on the canopy.
  • Universal Input Voltage Driver (120V-240V-277V). Custom CCT options available by special order.
  • Smooth and continuous dimming with an electronic low voltage (ELV), TRIAC, or 0-10V dimmer.

Manufacturer Resources:

Specification Sheet

Installation Guide

Manufacturer Resources

Product Specs

Bulb Base:
Integrated LED
Bulbs Included:
Yes
Collection:
Flare
Dimmable:
ELV;TRIAC;0-10V
Hanging Method:
Cable
Hardwired or Portable:
Hardwired
Lumens:
3801
Product Type:
Pendant
Shade/Glass Description:
Co-Extruded Acrylic Diffuser
Warranty:
5 Years Functional, 2 Years Finish
Product Group:
Indoor Lighting
Product Subgroup:
Pendant Lights
ADA Compliant:
No
Number of Bulbs:
1
Avg Rated Hours:
50000
Base Material:
Aluminum
Location Rating:
Damp
Product Subtype:
Linear Pendant
Brand Family:
WAC Standard
Backplate Diameter:
6.5"
Backplate Length:
6.5"
Energy Star:
No
Title 20:
Yes
Wire Length:
120"
Subcategory:
Indoor Hanging Lighting
Certification:
ETL, cETL, IP44
Glass Finish:
Co-Extruded Acrylic Diffuser
Location Indoor/ Outdoor:
Indoor/Outdoor (Covered)
Max Height:
151"
Min Height:
14"
Shade Material:
Acrylic
Title 24 Compliant:
Yes
Bulb Type:
Integrated LED
Segment:
Lighting
Product Voltage:
120-240-277V
Product Length:
2.44"
Beam Spread Angle:
Flood
Light Temperature:
3000K
Mounting Method:
Ceiling
Product Style:
Contemporary
Product Height:
37"
Product Category:
Hanging Lighting
Product Width:
2.44"
Product Wattage:
37W
Department:
Electrical

WAC Lighting WAC-PD-70937 – Frequently Asked Questions

1) Can the WAC Flare PD-70937 pendant be hung on a sloped ceiling?
Yes. The Flare LED pendant is a ceiling-mount, cable-hung fixture and the cylindrical body can be mounted on a slope ceiling. The canopy measures 6.5 inches across, so verify your existing ceiling box opening sits within that footprint.
2) Will the PD-70937 pendant run on 277V commercial power?
It will. The integrated driver is universal input, 120V through 240V and 277V, so the same fixture can be specified on residential 120V branch circuits and on 277V commercial lighting circuits without a separate transformer. It is a hardwired fixture, not a plug-in.
3) What kind of dimmer do I need for the WAC Flare LED pendant?
Use an electronic low voltage (ELV), TRIAC, or 0-10V dimmer. Those three control types give smooth continuous dimming. A standard incandescent or magnetic low voltage dimmer is not on the compatible list, so swap the switch if that is what is in the wall.
4) Can this pendant go over a bathtub, in a shower room, or on a covered porch?
The Flare pendant carries a Damp location rating and an IP44 rating, which suits covered exterior areas, porches, and bathrooms where it is not in direct spray. It is not wet-location rated, so do not hang it fully exposed to weather.
5) Does the WAC Flare pendant meet California Title 24?
Yes, the Flare LED pendant is listed as both Title 24 compliant and Title 20 compliant, and it is ETL and cETL certified for US and Canadian installation. It is not Energy Star rated and it is not ADA compliant, so skip it where a project calls for an ADA-compliant fixture.
6) How much light does the 37W Flare pendant put out, and is it enough on its own?
3801 lumens at 37W in a 3000K warm white, with a flood beam spread. That is a lot of output for a single 2.44 inch diameter cylinder, enough to light a kitchen island or a small seating area from one point. The description notes it reads well alone or in pairs over a longer counter.
7) Do I ever have to change a bulb in the WAC PD-70937, and what happens at end of life?
There is no lamp to replace. The light source is an integrated LED, included with the fixture, rated for an average 50,000 hours. That makes it maintenance-free in service, but it also means that at end of life the fixture is replaced rather than relamped, which is the trade-off for MRO and property teams used to stocking bulbs.
8) What finishes and color temperature does the PD-70937 Flare pendant come in?
Two finishes, Black (PD-70937-BK) and Brushed Nickel (PD-70937-BN), both in 3000K. Custom CCT is a special order item. The body is aluminum with a co-extruded acrylic diffuser, so the finish is on metal rather than plated plastic.
9) How big is the fixture body itself on the WAC Flare 37W pendant?
The cylinder is 37 inches long and 2.44 inches in diameter, hung on cable from a 6.5 inch canopy. It is a slim vertical tube, so it drops a lot of light from a very small visual footprint. If you need a shorter cylinder, the Flare acrylic diffuser is offered in four sizes within the collection.
How fast can I get the WAC Lighting WAC-PD-70937 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the WAC Lighting WAC-PD-70937 come with a warranty?
Absolutely. The WAC Lighting WAC-PD-70937 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the WAC Lighting WAC-PD-70937?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the WAC Lighting WAC-PD-70937 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!