WAC Lighting 20" View LED 3-CC...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$277.00
WAC Lighting View LED 3-CCT Bathroom Vanity or Wall Light WAC-WS-89120

WAC Lighting 20" View LED 3-CCT Bathroom Vanity or Wall Light WS-89120

(No reviews yet) Write a Review

Model: WAC-WS-89120
From the View Collection
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$277.00
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

WAC Lighting 20" View LED 3-CCT Bathroom Vanity or Wall Light WS-89120

High performance bath lighting charged with an inspired lighting design and clean architectural form. View is a recta-linear vanity light that extends 7in off the wall, available in 20in or 28in lengths. Its versatile mounting options makes View an excellent choice for backlighting vanities. Offered in brushed aluminum or anodized black, this fixture also offers on-site color temperature select-ability to adapt to any interior design color scheme. Change your perspective from different vantage points with View. Energy efficient integrated LED's provide a long-lasting maintenance-free bright and even illumination. NEW: Tri-CCT technology features a switch inside the canopy that is accessible during installation and allows you to toggle color temperatures between 2700K Warm - 3000K Warm White - 3500 White to find and set the perfect color temperature for your space. This fixture is factory pre-set to a default setting of your choosing (30 in part number for 3000K, 27 in part number for 2700K, etc.) for consistency and can be easily modified in the field during installation by the flip of a switch.
  • Back lit with etched acrylic diffuser. View is available in 20in or 28in lengths and offered in brushed aluminum or anodized black. Energy efficient integrated LED's provide a long-lasting maintenance-free bright and even illumination.
  • Conversion plate included to accommodate 4in junction box
  • 120V AC LED Technology - no driver or transformer required. Easily fits on a pancake junction box. 277V or 240V options available by special order.
  • Smooth and continuous dimming with an electronic low voltage (ELV) or TRIAC dimmer.

Manufacturer Resources:

Specification Sheet

Installation Guide

Manufacturer Resources

Product Specs

Bulb Base:
Integrated LED
Bulbs Included:
Yes
Collection:
View
Dimmable:
ELV;TRIAC
Hardwired or Portable:
Hardwired
Lumens:
805
Product Type:
Bath Vanity & Wall Light
Shade/Glass Description:
White Acrylic Etched Diffuser
Warranty:
5 Years Functional, 2 Years Finish
Product Group:
Indoor Lighting
Product Subgroup:
Vanity Lights
ADA Compliant:
No
Number of Bulbs:
1
Avg Rated Hours:
50000
Base Material:
Aluminum
Location Rating:
Damp
Brand Family:
WAC Standard
Backplate Length:
7.5"
Energy Star:
No
Title 20:
Yes
Subcategory:
Indoor Wall Lighting
Certification:
ETL, cETL, IP44
Glass Finish:
White Acrylic Etched Diffuser
Location Indoor/ Outdoor:
Indoor/Outdoor (Covered)
Shade Material:
Acrylic
Title 24 Compliant:
Yes
Bulb Type:
Integrated LED
Segment:
Lighting
Product Voltage:
120-240-277V
Beam Spread Angle:
Flood
Light Temperature:
2700K
Mounting Method:
Wall;Up/Down
Product Style:
Contemporary
Product Height:
3"
Product Category:
Wall Lighting
Product Width:
20"
Product Wattage:
10W
Department:
Electrical

WAC Lighting WAC-WS-89120 – Frequently Asked Questions

1) Will the WAC Lighting View WS-89120 vanity light mount on an existing 4 inch junction box?
Yes. The View WS-89120 ships with a conversion plate for a 4 inch junction box, and it also fits directly on a pancake junction box. The backplate is 7.5 inches long, so it covers the box opening. It is a hardwired fixture, not plug-in.
2) Can I change the color temperature on the WS-89120 View light after it ships, or am I stuck with what I ordered?
You can change it on site. A Tri-CCT switch sits inside the canopy and is accessible during installation, letting you toggle between 2700K warm, 3000K warm white, and 3500K white. The fixture arrives pre-set to whichever temperature you ordered (27, 30, or 35 in the part number), so a property manager standardizing a building can order one setting and still adjust an individual room without swapping the fixture.
3) Is the WAC View WS-89120 safe to install in a bathroom over a shower or in a steam-prone bath?
The View WS-89120 is rated for damp locations and listed indoor/outdoor for covered areas, with an IP44 rating plus ETL and cETL listings. That covers a typical bathroom vanity wall and a covered exterior spot. Damp rated is not wet rated, so keep it out of direct spray inside a shower enclosure.
4) What dimmer works with the WS-89120 and do I need a separate LED driver?
No driver or transformer is needed, the View WS-89120 runs on 120V AC LED technology. For dimming, use an electronic low voltage (ELV) or TRIAC dimmer, which gives smooth continuous dimming. A standard incandescent-only forward-phase dimmer is not the right control here.
5) How far does the WAC View vanity light stick out from the wall, and can it be mounted vertically?
View extends 7 inches off the wall and is 3 inches high on the 20 inch body. Mounting is wall-mount with up or down orientation, which is why it is often used to backlight a vanity mirror. The 7 inch projection is the number to check against mirror frames, medicine cabinet doors, and clearance over a sink.
6) Can I get the View WS-89120 for a 277V commercial circuit?
The View WS-89120 is a 120V fixture as stocked. 277V and 240V versions are available by special order, which is why the voltage spec reads 120-240-277V. If your building runs 277V lighting branch circuits, specify that at order time rather than assuming the standard part will work.
7) How much light does the 20 inch WAC View vanity fixture actually put out?
805 lumens from a 10W integrated LED, flood distribution, backlit through a white etched acrylic diffuser so the output is even rather than spotty. That is roughly a single-lamp level of light, so over a double vanity most designers run two fixtures or pair it with ceiling light.
8) Will I ever have to change a bulb in the WAC View, or is the LED built in?
The LED is integrated, no socket and no lamp to replace. It is rated 50,000 average hours and arrives with the light source installed. For an MRO or multi-family maintenance program that means no relamping cycle, but a failed fixture is a fixture replacement rather than a bulb.
9) What finishes and lengths does the WAC View bath light come in if I need to match other rooms?
View is offered in brushed aluminum or anodized black, in 20 inch or 28 inch lengths. The WS-89120 is the 20 inch body. Each finish is available in all three factory color temperature presets (2700K, 3000K, 3500K), so you can match finish across a building and still set the light color per space.
10) What is the body of the WAC View vanity light made of?
Aluminum housing with a white etched acrylic diffuser. The acrylic lens is what spreads the backlit output evenly, and aluminum plus the IP44 damp rating is why it holds up on a bathroom wall rather than a dry-location-only steel body.
How fast can I get the WAC Lighting WAC-WS-89120 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the WAC Lighting WAC-WS-89120 come with a warranty?
Absolutely. The WAC Lighting WAC-WS-89120 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the WAC Lighting WAC-WS-89120?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the WAC Lighting WAC-WS-89120 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!