WAC Lighting 27" Repose LED Bathroom Vanity or Wall Light WS-34027

Yes. The Repose WS-34027 ships with a universal voltage driver rated 120-240-277V, and the driver sits inside the canopy, so there is no remote driver to find a home for. Same fixture whether the panel feeds 120V residential or 277V commercial lighting circuits. It is hardwired, not plug-in.

Use an electronic low voltage (ELV), TRIAC, or 0-10V dimmer. The 22W integrated LED dims smoothly and continuously on any of those three. A standard incandescent/magnetic low-voltage dimmer is not on the compatible list, which is the usual cause of flicker or drop-out on a job like this.

Overall the fixture is 27 inches wide by 5.88 inches high. The backplate it mounts on is 22.88 inches long, so your junction box has to fall within that span of the fixture's center, not out at the 27 inch extremes. Plan the rough-in box accordingly over a vanity or mirror.

It is damp location rated and carries an IP44 rating, so it is good for a bathroom with steam or shower humidity and for covered outdoor use such as a soffit or porch. It is not a wet-location fixture, so keep it out of direct spray and off fully exposed exterior walls.

Yes on both. The WS-34027 is listed ADA compliant, and it is Title 24 and Title 20 compliant for California work. It is ETL and cETL listed for the US and Canada. It is not Energy Star rated.

The Repose WS-34027 is a wall-mounted fixture and the mounting data lists wall mounting with up or down orientation. That covers horizontal mounting over a vanity and flipping the fixture so the light throws up or down, which is how a sconce beside a mirror is usually hung. Light distribution is a flood beam, so it spreads rather than spots.

1493 lumens at 22W, in 3500K neutral white. That is a middle ground between warm 2700K and cool 4000K, which reads clean at the mirror without going blue. Output is flood distribution through a clear acrylic art diffuser, so it washes the face evenly rather than throwing a beam.

No. The LED is integrated, not a lamp in a socket, so there is nothing to relamp. It is rated 50,000 average hours, which is why it is sold as maintenance-free. For an MRO buyer standardizing a building, budget this as a fixture replacement at end of life rather than a lamp swap.

Body is aluminum hardware with an acrylic diffuser, supplied in a single aluminum finish, ordered as WS-34027-AL. Aluminum does not rust, and the acrylic lens will not shatter the way glass does, which matters in multi-family and hospitality restrooms. Only one finish and one color temperature are offered, so repeat orders across a property match without cross-checking codes.

No add-ons. The LED is built in and counted as one integrated light source, and the universal voltage driver is already in the canopy. All you supply is the junction box, supply wiring, and a compatible ELV, TRIAC, or 0-10V dimmer if the circuit is being dimmed.