You may also like
WAC Lighting 5.9" Disc LED Energy Star Flush Mount and Retrofit Kit FM-304
Model: WAC-FM-304
WAC Lighting 5.9" Disc LED Energy Star Flush Mount and Retrofit Kit FM-304Multiple high-powered LED's illuminate an acrylic diffuser uniformly without socket shadows which are common in conventional...
WAC Lighting
Starting at
$38.00
$27.95
WAC Lighting 5.9" Disc LED Energy Star Flush Mount and Retrofit Kit FM-304-930-WT
Multiple high-powered LED's illuminate an acrylic diffuser uniformly without socket shadows which are common in conventional flush mounts. This multi-purpose Wet Location, Energy Star Rated flush mount can be mounted without a transformer on a ceiling or on a wall in a junction box, and also includes an optional retrofit kit with an A19 socket designed to fit into an existing 3" - 6" recessed units The disc is available in 6" and 4" sizes, and various finishes and color temperature options.
- Disc 4in LED Energy Star Flush Mount & Retrofit Kit 3000K in White (Pack of 10)
- High quality aluminum construction with an opaque acrylic diffuser.
- Energy Star Rated, Wet Location Listed, CEC Title 24 Compliant, and ADA Compliant low profile design.Can be installed on a ceiling or on a wall in a junction box. Includes an optional retrofit kit with an A19 socket designed to fit into an existing 3" - 6" recessed unit.
- Smooth and continuous dimming with an electronic low voltage (ELV) dimmer. ACLED technology, no transformer or driver required.
- High Powered LED modules, 50,000 hours rated life, Color Temp: 3000K or 4000K, CRI: 90.
- Standards: ETL & cETL IP65 Wet Location Listed.
Features
- Delivered Lumens: Up to 950lm
- 3000K, 4000K (6" only)
- CRI: 90
- Power: 12W, 15W
- Input: 120 VAC, 50/60Hz
- ELV Dimming: 100-5%
- Rated Life: 50000 Hours
- Construction: Die-cast aluminum with white acrylic diffuser
- Multiple LED array for uniform illumination
- ACLED driverless technology
- Can be mounted on ceiling or wall in all orientations
Manufacturer Resources:
Manufacturer Resources
Product Specs
- ADA Compliant:
- Yes
- Bulb Base:
- Integrated LED
- Bulb Shape:
- LED Module
- Bulbs Included:
- Yes
- Collection:
- Disc
- Dimmable:
- ELV, TRIAC, 0-10V
- Hardwired or Portable:
- Hardwired
- Lumens:
- 670
- Number of Bulbs:
- 1
- Product Type:
- Flush Mount
- Shade/Glass Description:
- Opaque Acrylic Diffuser
- Warranty:
- 5 Years Functional, 2 Years Finish
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Flush/Semi Flush
- Avg Rated Hours:
- 50000
- Base Material:
- Aluminum
- Location Rating:
- Wet
- Brand Family:
- WAC Limited
- CEC Listed:
- Yes
- CRI:
- 90
- Energy Star:
- Yes
- Subcategory:
- Flush Mount
- Certification:
- ETL, cETL, IP65
- Glass Finish:
- Opaque Acrylic Diffuser
- Location Indoor/ Outdoor:
- Indoor/Outdoor
- Shade Material:
- Acrylic
- Title 24 Compliant:
- Yes
- Bulb Type:
- LED
- Segment:
- Lighting
- Product Voltage:
- 120V
- Product Length:
- 5.9"
- Light Temperature:
- 3000K
- Mounting Method:
- Ceiling/Wall;Any
- Product Style:
- Functional
- Product Height:
- 1.13"
- Product Category:
- Ceiling Lighting
- Product Width:
- 5.9"
- Product Wattage:
- 12W
WAC Lighting WAC-FM-304-930-WT – Frequently Asked Questions
1) Can the WAC Disc FM-304 flush mount go into an existing recessed can instead of a junction box?
Yes. The Disc FM-304 ships with an optional retrofit kit using an A19 socket, so it screws into the existing lamp socket of a 3 inch to 6 inch recessed housing. Hardwired to a junction box on a ceiling or wall is the other mounting route, and no transformer or remote driver is needed either way because the ACLED module runs directly on 120V line voltage.
2) Will a 5.9 inch Disc LED fixture cover the opening of a 6 inch recessed can?
The fixture body measures 5.9 x 5.9 inches with a 1.13 inch height, so on a nominal 6 inch can the trim is roughly flush to the rough opening rather than overlapping it generously. On a 3 to 5 inch housing it covers with margin. If you need a wider overlap on 6 inch cans, confirm your actual ceiling cutout before committing to a full pack.
3) Is this WAC Disc LED rated for a covered patio, shower, or exterior soffit?
Wet location listed, ETL and cETL, with an IP65 rating, so open exterior soffits, covered walkways, and shower or tub areas are all in scope. The die-cast aluminum body and opaque acrylic diffuser are what carry that rating, and it mounts in any orientation, ceiling or wall.
4) What dimmer works with the FM-304 Disc LED, and how low does it go?
It is driverless ACLED, and the dimming field lists ELV, TRIAC, and 0-10V compatibility. With an electronic low voltage (ELV) dimmer it runs smooth from 100 percent down to 5 percent. Because there is no separate driver to match, you are selecting the dimmer against a 12W load at 120V, so check the dimmer's minimum load if you are putting only one or two fixtures on a circuit.
5) Does the WAC Disc flush mount meet California Title 24 and ADA requirements?
Yes on both. It is CEC listed and Title 24 compliant, which is what California jobs ask for, and it is Energy Star rated. The low profile also makes it ADA compliant, so it can sit on a wall in a corridor or stairwell without breaking the protrusion limit at 1.13 inches deep.
6) How much light does the 5.9 inch FM-304-930-WT actually put out, and what color is it?
670 lumens at 12W, 3000K warm white, with a 90 CRI. That output suits closets, baths, laundry rooms, hallways, and stair landings rather than a primary room light. 3000K is the only color temperature on the 5.9 inch white Disc; 4000K is offered on the 6 inch version of the Disc family.
7) Do I need to order bulbs or a transformer separately for the Disc LED flush mount?
No. The LED module is integrated and included, so there is nothing to lamp, and ACLED technology means no transformer or remote driver is part of the installation. You wire 120V to the junction box or thread the retrofit kit into an existing socket and you are done. Rated life is 50,000 hours.
8) Can I buy the white 3000K Disc flush mount in bulk for a multi-unit retrofit?
Yes. The 5.9 inch white 3000K Disc is sold as a single unit and in packs of 4, 10, and 24, which is how most multi-family and hotel can-light conversions get ordered. All pack quantities are the same fixture, FM-304-930-WT.
9) Why choose a disc flush mount over a standard recessed LED downlight for a bath or closet?
A disc mounts to the surface, so it works where there is no can and no ceiling depth, and it can also drop into an existing 3 to 6 inch can with the included A19 retrofit kit. The multiple LED array behind the opaque acrylic diffuser spreads light evenly instead of showing the socket shadow a single-lamp flush mount gives you. A recessed downlight is the better pick when you want a tighter, directional beam and have the plenum space; the Disc is for surface work, wall mounting, and wet locations where you want a sealed IP65 body.
How fast can I get the WAC Lighting WAC-FM-304-930-WT delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the WAC Lighting WAC-FM-304-930-WT come with a warranty?
Absolutely. The WAC Lighting WAC-FM-304-930-WT is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the WAC Lighting WAC-FM-304-930-WT?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the WAC Lighting WAC-FM-304-930-WT from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.