WAC Lighting 1 R4FBR2T FQ 4" R...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$116.95
WAC Lighting 1 R4FBR2T FQ 4" Remodel IC-Rated Recessed Housing

WAC Lighting 1 R4FBR2T FQ 4" Remodel IC-Rated Recessed Housing

(No reviews yet) Write a Review

Model: R4FBR2T-1
From the FQ Collection

In Stock (leaves warehouse same day if ordered before 3pm ET)

$116.95
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

WAC Lighting R4FBR2T FQ 4" Remodel IC-Rated Recessed Housing

The WAC Lighting R4FBR2T is part of the FQ Recessed series, a complete line of high-performance LED luminaire housings engineered for outstanding functionality and quality. This 4" snap-on round housing is built from 20 Gauge Galvanized Steel, is IC Rated for airtight remodel applications, and is ETL & cETL rated for dry locations. It pairs with a full line of round and square, trimmed and trimless FQ Series trims for versatile downlight, adjustable, and wall-wash lighting solutions.

Key Features

  • Trade Size: 4" snap-on round housing sized for FQ Series round and square Downlight trims.
  • Durable Construction: 20 Gauge Galvanized Steel housing for long-term structural reliability.
  • IC Airtight Remodel Design: Snap-on round housing is IC Rated and compatible with round and square Downlight trims for IC Airtight remodel installations.
  • Uniform Ceiling Cutout: Consistent cutout size across DL, ADJ, and WW configurations in Round or Square, Trim or Trimless, simplifying trim selection and swaps.
  • Quick-Connect Driver: Quick connectors installed on the driver allow for fast, tool-free driver replacement.
  • Concealed Driver: Driver is fully concealed within the fixture for a clean finished appearance.
  • Electrical Rating: Rated for 120-240-277 voltage input at 13W total wattage.
  • Dimming Compatibility: Supports 0-10V, ELV, and TRIAC dimming control.

Certifications & Compliance

  • ETL Listed
  • cETL Listed
  • IC Rated
  • Suitable for Dry Locations

Technical Specifications

  • Bulbs Included: No
  • Collection: FQ
  • Dimmable: 0-10V,ELV;TRIAC
  • Energy Star: No
  • Hardwired or Portable: Hardwired
  • Product Type: Recessed Housings
  • Safety Rating: ETL;cETL
  • Warranty: 5 Years Functional
  • Subcategory: 4" Housing
  • Voltage: 120-240-277
  • Material: 20 Gauge Galvanized Steel
  • Country of Origin: Thailand
  • Location Rating: Dry
  • Total Wattage: 13

Typical Applications

  • Residential and Commercial Remodel Recessed Lighting
  • New Construction and Renovation Ceiling Installations
  • IC Airtight Ceiling Assemblies
  • Dry-Location Interior Lighting
  • Downlight, Adjustable, and Wall-Wash Trim Applications

Why WAC Lighting?

WAC Lighting builds the FQ Series R4FBR2T housing from 20 Gauge Galvanized Steel with a concealed, quick-connect driver for easy servicing, backed by ETL and cETL safety listings for dry-location use. Combined with a 5-Year Functional Warranty, this IC-Rated remodel housing delivers dependable, code-compliant performance for professional recessed lighting installations.

Product Specs

Bulbs Included:
No
Collection:
FQ
Dimmable:
0-10V,ELV;TRIAC
Energy Star:
No
Hardwired or Portable:
Hardwired
Product Type:
Recessed Housings
Safety Rating:
ETL;cETL
Subcategory:
4" Housing
Product Voltage:
120-240-277
Product Material:
20 Gauge Galvanized Steel
Location Rating:
Dry
Total Wattage:
13
Product Style:
Functional

WAC Lighting R4FBR2T-1 – Frequently Asked Questions

1) Can the WAC Lighting R4FBR2T 4-inch housing be installed in a ceiling with insulation touching it?
Yes. The R4FBR2T is an IC Rated airtight remodel housing, so insulation can be in direct contact with it. It is built from 20 gauge galvanized steel and is rated for dry locations only, so keep it out of damp or wet ceiling areas like unvented bathrooms or exterior soffits.
2) Does the R4FBR2T remodel housing come with a trim or LED light engine, or do I order those separately?
The housing ships without bulbs, and the trim is a separate order. The R4FBR2T is the 4 inch snap-on round housing from WAC Lighting's FQ Recessed series, and it takes FQ Series round or square Downlight trims. Plan on specifying the trim style (downlight, adjustable, or wall wash) and whether you want trimmed or trimless when you place the order.
3) Will a 4-inch FQ housing work on 120V residential and 277V commercial circuits?
Yes. The R4FBR2T is rated for 120, 240 and 277 volt input at 13W total wattage, so the same housing covers residential 120V branch circuits and 277V commercial lighting circuits. It is hardwired, not plug-connected.
4) I need downlight, adjustable, and wall-wash fixtures in the same ceiling. Do I need different housings or different cutouts?
One housing covers all three. The FQ 4 inch cutout is consistent across downlight (DL), adjustable (ADJ), and wall-wash (WW) configurations in round or square, trim or trimless, so you can spec a single housing type throughout and decide the optics per opening. It also means a trim can be swapped later without recutting the ceiling.
5) What dimmers work with the WAC FQ R4FBR2T recessed housing?
The driver supports 0-10V, ELV and TRIAC dimming. On a residential job a standard forward-phase TRIAC or ELV wall dimmer will work; on a commercial job with a lighting control system, use the 0-10V input. Do not pair it with a standard incandescent-only dimmer expecting magnetic low-voltage behavior.
6) If the driver fails after install, do I have to pull the whole housing out of the ceiling?
No. The FQ housing's driver is concealed inside the fixture but uses quick connectors, so it can be swapped without tools. That matters for property managers and MRO crews maintaining a lot of downlights, since the ceiling and trim stay intact during a driver replacement.
7) Is a remodel housing like this the right choice, or do I need a new-construction frame-in kit?
A remodel housing is what you want when the ceiling is already finished. The R4FBR2T snaps into a cut opening from below and clamps to the drywall, so no joist access is needed. If you are working with open framing before the ceiling goes up, a new-construction housing that nails to the joists is the better pick. Because this one is IC rated and airtight, it is also acceptable in an insulated, air-sealed ceiling assembly.
How fast can I get the WAC Lighting R4FBR2T-1 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the WAC Lighting R4FBR2T-1 come with a warranty?
Absolutely. The WAC Lighting R4FBR2T-1 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the WAC Lighting R4FBR2T-1?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the WAC Lighting R4FBR2T-1 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!