You may also like
Washer 1/2 HDG Beveled Washer (Jar 10)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Washers
Metallics JBVWG12 – Frequently Asked Questions
1) What bolt size does the JBVWG12 beveled washer fit?
It is a 1/2 inch washer, so it pairs with 1/2 inch bolts, anchors, or threaded hanger rod.
2) Can I use a beveled washer instead of a flat washer on a beam flange?
That is exactly the case for the beveled washer. A flat washer on a tapered beam flange only contacts on one edge and bends the bolt or anchor rod sideways under load. The JBVWG12 bevel brings the bearing face parallel so the 1/2 inch bolt loads straight. On flat plate or strut, a standard flat washer is the right part and the bevel is unnecessary.
3) What is the Metallics JBVWG12 washer used for?
The JBVWG12 is a 1/2 inch hot-dip galvanized beveled washer. The bevel takes up the slope on sloped or tapered structural surfaces, such as the flange of a channel or an I-beam, so the nut and bolt seat square instead of pulling at an angle. Common on structural steel anchoring for conduit racks, strut supports, and hanger rod connections.
4) Is the JBVWG12 beveled washer galvanized for outdoor use?
It is hot-dip galvanized (HDG), the heavier zinc coating used on exterior and damp-location structural work, rather than a thin electroplated zinc. That makes it suitable for outdoor steel connections and unconditioned spaces.
5) How many washers come in a jar of Metallics JBVWG12?
Ten washers per jar. The jar is the pack type, so the order unit is the jar of 10 rather than loose pieces.
6) Is the JBVWG12 ordered as a single model or are there multiple sizes?
JBVWG12 is one specific part: the 1/2 inch hot-dip galvanized beveled washer in a 10-count jar. If you need another bolt diameter, that is a different Metallics part number, not an option on this one.
How fast can I get the Metallics JBVWG12 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JBVWG12 come with a warranty?
Absolutely. The Metallics JBVWG12 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JBVWG12?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JBVWG12 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.