You may also like
Washer 7/8 Beveled Washer HDG (Jar 10)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Washers
Metallics JBVWG78 – Frequently Asked Questions
1) What is the Metallics JBVWG78 beveled washer used for?
The JBVWG78 is a 7/8 inch beveled washer, hot dip galvanized. The bevel takes up the slope on a sloped or tapered surface, such as a structural steel flange or channel, so the nut and bolt head seat flat instead of loading on one edge. It is sold in jar packaging, 10 pieces.
2) Is the Metallics 7/8 beveled washer galvanized for outdoor or damp use?
It is hot dip galvanized (HDG), which is the heavier zinc coating used for exterior steel, damp interiors, and wet locations. That makes it suitable alongside galvanized bolts and galvanized structural steel where plain or zinc-plated hardware would rust.
3) Can I use a flat washer instead of a beveled washer on sloped steel?
Not where the surface is tapered. A flat washer on a sloping flange contacts on one edge only and bends the washer or bends the bolt as it is tightened. The beveled washer carries the angle so the clamping face is square to the fastener. On flat plate, a standard flat washer is the right part and the 7/8 beveled washer is unnecessary.
4) How many washers come in a jar of Metallics JBVWG78?
Ten pieces per jar. The jar is the sell unit, so order by jar rather than by individual washer when you are stocking a truck or a job box.
5) What is the part number to order for the Metallics 7/8 hot dip galvanized beveled washer?
Order Metallics JBVWG78. That is the manufacturer part number for the 7/8 beveled washer in hot dip galvanized finish, supplied in the 10 piece jar.
How fast can I get the Metallics JBVWG78 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JBVWG78 come with a warranty?
Absolutely. The Metallics JBVWG78 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JBVWG78?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JBVWG78 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.