You may also like
Washer 3/8 Beveled Washer HDG (Jar 25)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Washers
Metallics JBVWG38 – Frequently Asked Questions
1) What bolt size does the Metallics JBVWG38 beveled washer fit?
The JBVWG38 is a 3/8 inch beveled washer, so it suits 3/8 inch bolts, rods, or hanger hardware.
2) Is the Metallics 3/8 beveled washer suitable for outdoor or damp locations?
It's hot dip galvanized (HDG), which is the coating normally specified for exterior, wet, and corrosive locations. That makes it a reasonable choice for outdoor strut, hanger, and structural anchoring work rather than plain-finish indoor-only hardware.
3) When do I need a beveled washer instead of a flat washer?
A beveled washer is what you use when the bearing surface isn't square to the fastener, for example a sloped structural flange or a tapered channel, so the nut seats flat instead of cocking on an angle. On a flat, perpendicular surface a plain flat washer is enough. The JBVWG38 is the 3/8 inch beveled version for those angled seats.
4) How many washers come in a jar of the Metallics JBVWG38?
Each jar holds 25 of the 3/8 inch beveled HDG washers. Pack type is a jar, so it's a countable shop quantity rather than bulk weight, which matters if you're stocking a service van or an MRO crib.
5) Can I use the JBVWG38 beveled washer with galvanized strut and threaded rod hangers?
Yes. As a 3/8 inch HDG beveled washer it pairs with 3/8 inch threaded rod and galvanized channel hardware, and matching the galvanized coating to galvanized strut keeps you from mixing finishes that corrode against each other. Use it where the strut flange or beam face isn't square to the rod.
How fast can I get the Metallics JBVWG38 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JBVWG38 come with a warranty?
Absolutely. The Metallics JBVWG38 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JBVWG38?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JBVWG38 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.