You may also like
Washer 3/8 Square Channel Wshr HDG (100 pcs)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Washers
Metallics MSCW38G – Frequently Asked Questions
1) Is the MSCW38G channel washer galvanized for outdoor or damp use?
It is hot-dip galvanized (HDG), which is the finish normally specified for exterior, wet-location, and unconditioned-space strut work rather than plain or electro-zinc washers.
2) How many washers come in a box of Metallics MSCW38G?
They ship 100 pieces to the pack, so one box covers a sizeable strut and rod run without reordering per hanger.
3) What is the difference between a square channel washer and a standard round flat washer?
A square channel washer like the MSCW38G is sized and shaped to seat inside the lip of a strut channel, spreading load across the channel edges so the fastener does not pull through or distort the strut. A round flat washer bears on a flat surface and will not register in the channel the same way. Use the square channel type anywhere you are bolting through strut.
4) Can I use the MSCW38G with 3/8 inch threaded rod and channel nuts for electrical conduit and cable tray supports?
Yes. It is a 3/8 inch square channel washer in hot-dip galvanized finish, intended for electrical fastening work, so it suits strut-supported conduit racks, cable tray hangers, and trapeze assemblies built on 3/8 inch rod.
5) What part number do I order for the 3/8 hot-dip galvanized square channel washer from Metallics?
Order Metallics MSCW38G. That number covers the 3/8 inch square channel washer in HDG, supplied 100 to the pack.
How fast can I get the Metallics MSCW38G delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics MSCW38G come with a warranty?
Absolutely. The Metallics MSCW38G is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics MSCW38G?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics MSCW38G from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.