You may also like
Washers 1/4 X 1-1/2 Fender St (Jar 100)
Manufacturer Resources
Product Specs
- Ansi:
- ANSI
- Country Of Origin:
- United States
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Washers
- Product Length:
- 3 in
- Product Height:
- 4.57 in
- Product Material:
- Steel Zinc
- Product Weight:
- 2.34 lbs
- Product Width:
- 3 in
Metallics JW114D – Frequently Asked Questions
1) What size bolt does the Metallics JW114D fender washer fit?
The JW114D is a 1/4 inch fender washer, so it takes a 1/4 inch bolt, screw, or threaded rod. The outside diameter is 1-1/2 inches, which spreads the load far wider than a standard 1/4 inch flat washer. That is the point of a fender washer: oversized bearing surface for soft or oversized-hole substrates.
2) Are Metallics JW114D fender washers suitable for outdoor or damp locations?
They are zinc plated steel, which handles indoor and normally dry or occasionally damp conditions. For direct weather exposure, wet locations, or coastal work, step up to stainless steel washers instead; zinc plating will eventually corrode in constant moisture.
3) Are these fender washers made in the USA?
Country of origin on the JW114D fender washer is the United States, which matters on public and institutional jobs carrying domestic-content requirements.
4) What is the difference between a fender washer and a flat washer for a 1/4 inch bolt?
Same bore, very different footprint. A standard 1/4 inch flat washer runs about 5/8 to 3/4 inch across; the JW114D runs 1-1/2 inches. Use the flat washer when you just need to protect the surface under a nut or bolt head, and the fender washer when the hole is oversized or the material is thin or soft and you need to spread clamping load so the fastener does not pull through.
5) How many washers come in a jar of Metallics JW114D?
One jar holds 100 pieces of the 1/4 x 1-1/2 fender washer, packed in a jar rather than a bag or box, so it stays sorted on a shelf or in a van bin. Jar weight is 2.34 lbs.
6) Can I use these fender washers for electrical strut, panel, and conduit support work?
That is what Metallics catalogs them for. They are an electrical-trade fastener, commonly used under 1/4 inch bolts on strut, hanger rod, panel mounting, and box or enclosure fastening where the mounting hole is larger than the bolt.
How fast can I get the Metallics JW114D delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JW114D come with a warranty?
Absolutely. The Metallics JW114D is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JW114D?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JW114D from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.