You may also like
Washers 1/4 X 2 Fender SS (Jar 100)
Special Features
- Features: A Larger Diameter for Greater Bearing Surface
Manufacturer Resources
Product Specs
- Ansi:
- ANSI
- Division:
- Electrical H1
- Field Application:
- Electrical, Plumbing, Heating and Air Conditioning Industries
- Inside Diameter:
- 4-Jan IN
- Outside Diameter:
- 2 IN
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Washer Type:
- Fender Washer
- Department:
- Electrical
- Product Subgroup:
- Washers
- Product Length:
- 3.5 in
- Product Height:
- 5.75 in
- Product Material:
- Stainless Steel
- Product Weight:
- 5.43 lbs
- Product Width:
- 3.5 in
Metallics JW1221SS – Frequently Asked Questions
1) Are these fender washers stainless steel, and can they be used outdoors?
Stainless steel, so corrosion resistance is far better than plain or zinc plated steel. That makes the JW1221SS the right choice for exterior strut and conduit runs, rooftop mechanical equipment, damp mechanical rooms, and anywhere a zinc washer would bleed rust onto a finished surface.
2) When should I use a 2 inch fender washer instead of a regular 1/4 inch flat washer?
Use the fender size when the material under the head is soft or oversized: sheet metal, drywall, plywood, fiberglass panels, insulation board, or an oversized or slotted hole in strut and bracketry. A standard 1/4 inch flat washer is roughly 5/8 inch across and will pull through or dimple those materials. The 2 inch face on the JW1221SS spans the hole and spreads the clamp load. On solid steel with a clean hole, a standard flat washer is enough.
3) How many washers come in a jar of Metallics JW1221SS?
100 washers per jar. They ship in a jar rather than a bag, which keeps them from spilling in a gang box or on a service van shelf. Jar weight is 5.43 lbs.
4) Are stainless fender washers suitable for plumbing and HVAC work, or just electrical?
Both. Metallics lists the field application as the electrical, plumbing, heating and air conditioning industries. In practice that means hanger rod and clevis work, duct and equipment mounting, and strut fastening alongside conduit and box support.
5) Does mixing stainless washers with galvanized strut or steel bolts cause a problem?
Pairing a stainless washer with zinc plated or galvanized steel will drive galvanic action at the contact face in wet locations, and the zinc coating is what corrodes first. Indoors and dry, it is a non-issue. Outdoors or in wash-down areas, match the bolt and nut to the stainless washer so the whole assembly is stainless.
How fast can I get the Metallics JW1221SS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JW1221SS come with a warranty?
Absolutely. The Metallics JW1221SS is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JW1221SS?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JW1221SS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.