You may also like
Washers 3/8 X 1-1/4 Fender St-zn (Jar 100)
Manufacturer Resources
Product Specs
- Ansi:
- ANSI
- Division:
- Electrical H1
- Field Application:
- Larger Diameter For Greater Bearing Surface.
- Outside Diameter:
- 1/1/2004 IN
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Washer Type:
- Fender Washer
- Department:
- Electrical
- Product Subgroup:
- Washers
- Product Finish:
- Zinc Chromate
- Product Length:
- 3 in
- Product Height:
- 3.6 in
- Product Material:
- Steel Zinc
- Product Weight:
- 2.3 lbs
- Product Width:
- 3 in
Metallics JW119D – Frequently Asked Questions
1) Will a 3/8 fender washer hold on an oversized or slotted hole in strut or sheet metal?
That is exactly what it is for. With a 1-1/4 inch outside diameter against a 3/8 inch bolt, the JW119D bridges oversized, slotted, or worn holes that a standard 3/8 flat washer would pull through. Metallics lists the larger diameter specifically for greater bearing surface.
2) Is a fender washer the right choice, or should I use a standard flat washer?
Pick by what the washer is bearing against. A standard 3/8 flat washer is fine on steel with a clean, correctly sized hole. Go to the JW119D fender washer when the hole is oversized or slotted, or the base material is thin, soft, or spongy and needs the load spread wide, which is what the 1-1/4 inch OD on a 3/8 bolt does.
3) Are Metallics JW119D fender washers rated for outdoor or damp locations?
They are zinc plated steel with a zinc chromate finish, which handles normal indoor and protected outdoor exposure. For continuously wet, coastal, or corrosive environments, step up to stainless rather than relying on a zinc chromate coating.
4) How many washers come in a jar of Metallics JW119D?
One jar holds 100 of the 3/8 x 1-1/4 fender washers, packed in a jar rather than a bag or box, so it stays usable on a shelf or in a van drawer. Jar weight is listed at 2.3 lbs.
5) What part number do I order for Metallics 3/8 x 1-1/4 fender washers?
Order Metallics JW119D. That is the single manufacturer part number for the 3/8 x 1-1/4 zinc plated steel fender washer in the 100 count jar; there are no finish or size options to specify.
How fast can I get the Metallics JW119D delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JW119D come with a warranty?
Absolutely. The Metallics JW119D is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JW119D?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JW119D from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.