Weslock 2810 Hillcrest Single ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$184.60
$96.92
Weslock Weslock 2810 Hillcrest Single Cylinder Handleset with New Haven Lever, Adjustable Latch and Round Corner Strikes WES-2810-X

Weslock 2810 Hillcrest Single Cylinder Handleset with New Haven Lever, Adjustable Latch and Round Corner Strikes

(No reviews yet) Write a Review

Model: R2810-2X2FR2D
From the Premiere Essentials Collection
$184.60
$96.92
Selected Finish is
Selected Handing is
Selected Free Keying Option is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$184.60
$96.92
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

WESLOCK HILLCREST SINGLE CYLINDER HANDLESET OVERVIEW

Premiere Essentials Hillcrest entry handle with a single cylinder deadbolt that comes with adjustable spring latch & adjustable dead bolt latch, round faceplate & round strike, round foot cap screw, and assembly screws with wood screws. Interior Round Single Cylinder Deadbolt rosette with Passage rosette with spindle attached to mounting plate, and a non-handed Hudson knob. Easy to follow instructions.

 

Standard features

  • Exceeds ANSI Grade 2 Lock Standards
  • Weslock 5-pin cylinder Keyway
  • Standard 5-1/2" center to center door prep, and adjustable 2-3/8" to 2-3/4" latches
  • Fits 1-3/8" to 2-1/4" door thickness & with a adjustable foot screw
  • Dual square spindle design
  • Limited Warranty

 

Manufacturer Resources

Product Specs

Product Group:
Mechanical Locks
Series:
Premiere Essentials
Warranty:
Limited 25 Year Mechanical and Limited 5 Year Finish
Collection:
Premiere Essentials
Cross Bore:
2-1/8"
Keyed:
Yes
Product Subgroup:
Bored Locksets
Product Type:
Handlesets
Subcategory:
Residential Handlesets
Keyed Function:
Single Cylinder
Commercial/Residential:
Residential
Cylinder and Keyways:
5 Pin Cylinder, Weslock Keyway
Lock Function:
Entry
IMAP Policy:
Yes
Backset (Distance):
2-3/8 or 2-3/4
Product Function:
Single Cylinder
Door Thickness Range:
1-3/8" to 2"
Product Design:
Round Rose
Product Dimension:
16.98" x 2-7/8" with 2-1/2" Projection Handleset Exterior and 2-5/8" Diameter Rose with 2-5/8" Projection Interior
Door Strike:
Round Corner Strike
Product Category:
Mechanical Locks
Product Substrate:
Zinc Alloy
Department:
Door Hardware

Weslock R2810-2X2FR2D – Frequently Asked Questions

1) Will the Weslock 2810 Hillcrest handleset fit my existing door prep, or do I have to re-drill?
If the door is bored to the standard residential handleset pattern, it drops in. The 2810 Hillcrest uses 5-1/2 inch center-to-center spacing between the deadbolt and the handle bore, a 2-1/8 inch cross bore, and an adjustable latch that sets to either a 2-3/8 or a 2-3/4 inch backset. Those two backsets are the only ones used on residential doors, so you don't have to know which one your door was drilled for before ordering. Measure from the door edge to the center of the bore: 2-3/8 or 2-3/4 inches means no new holes.
2) Do I need to order the Weslock 2810 Hillcrest handleset left hand or right hand?
You order it handed. The 2810 Hillcrest is built as a left hand or a right hand unit in each finish, so pick based on the door. Stand outside the door: if the hinges are on your left, it's a left hand door. Get it wrong and the exterior grip won't sit correctly for the swing, so confirm the swing before you place the order rather than after the box arrives.
3) Can I get several Weslock 2810 handlesets keyed alike so one key opens all my units?
Yes. The Hillcrest handleset is ordered either keyed different or keyed alike at no charge, and there's a key code field if you're matching an existing Weslock key group. It runs a 5 pin cylinder on the Weslock keyway, so anything you're matching has to be Weslock keyway as well. For a landlord or property manager standardizing entry doors across a building, order the whole batch keyed alike in one go with the same code so they all come from the factory on one key.
4) Is the Weslock 2810 Hillcrest a bored lockset or a mortise handleset?
Bored. The Hillcrest installs into a 2-1/8 inch cross bore with a separate deadbolt bore above it at 5-1/2 inch centers, which is the standard drilled prep. A mortise handleset is a different animal, it needs a deep rectangular pocket routed into the door edge for a lock case. The Baldwin Estates 6542 Tremont entry mortise trim and the Emtek 3000 series brass mortise handlesets are mortise products. If your door is cut for a mortise case, this Weslock will not go in it, and if your door is bored, a mortise set will not go in yours.
5) What is the closest equivalent to the Weslock 2810 Hillcrest handleset from another brand?
The Schlage Residential F60 Addison single cylinder keyed entry handleset with Accent lever is the nearest match. Both are single cylinder keyed entry handlesets with a lever interior trim, and the F60 Addison is a Grade 2 lock in the F Series. The Weslock 2810 Hillcrest is a single cylinder entry handleset with the New Haven lever that exceeds ANSI Grade 2 lock standards. Door thickness is where they part: the F60 Addison covers 1-3/8 inch to 1-3/4 inch doors, while the 2810 Hillcrest covers 1-3/8 inch to 2 inch.
6) I have a 2-inch thick entry door - which handlesets will actually fit?
The Weslock 2810 Hillcrest covers a 1-3/8 inch to 2 inch door thickness range, so a 2 inch door is at the top of its range. The Deltana 810871 Montego handleset covers the same 1-3/8 inch to 2 inch range. Going thicker than 2 inches, the Yale Real Living BYRD226NRRX Assure Lock standalone touchscreen deadbolt with Ridgefield handleset covers 1-3/4 inch to 2-1/4 inch. The Schlage Residential F60 Addison and the Pamex FS7P31 Lexington both stop at 1-3/4 inch.
7) Which Emtek and Baldwin handlesets are not a substitute for a Weslock 2810 Hillcrest?
The Emtek 3002 Memphis, 3004 Hamilton, 3005 Melrose and 3006 Manhattan brass mortise entrance handlesets are all dummy function - they are pull trim with no latch and no cylinder, so they cannot replace a keyed entry opening. The Baldwin Estates 6542 Tremont single cylinder and double cylinder entry mortise trim are mortise trim for a 1-3/4 inch door and require a mortise lock body behind them. The Weslock 2810 Hillcrest is a keyed single cylinder entry handleset with a 5 pin Weslock keyway, an adjustable 2-3/8 inch to 2-3/4 inch backset latch and a 2-1/8 inch cross bore, so it goes into a standard bored door prep.
8) What is the difference between the Weslock 2810 Hillcrest and the Kwikset 687 Amador handleset?
The Kwikset 687AMD Amador single cylinder handleset is exterior trim only - it is the keyed outside handle with no interior trim in the box - and it is a Grade 3 lock for 1-3/4 inch doors. It comes in two keyway builds: the 687AMD SMT with SmartKey and the 687AMD SMC with an SC1 keyway SmartKey. The Weslock 2810 Hillcrest is a complete single cylinder entry set - exterior handle plus the New Haven lever interior trim, adjustable spring latch, adjustable deadbolt latch, round faceplate and round corner strikes - on a Weslock 5 pin keyway, and it exceeds ANSI Grade 2 lock standards.
9) Is the Weslock 2810 Hillcrest a single cylinder deadbolt, and does it work next to sidelight glass?
Single cylinder. The 2810 Hillcrest is a keyed entry handleset with a key on the outside and a thumbturn on the inside, which is what most residential entry doors use. Where there is glass in the door or a sidelight within reach of the thumbturn, some jurisdictions push you to a double cylinder that needs a key on both faces instead. This one is not that lock. Check the local code before you specify it on a glass front opening.
10) Is a Weslock Hillcrest handleset strong enough for a rental or apartment entry door?
It's a residential grade set. Weslock rates the Hillcrest above ANSI Grade 2 lock standards, with a zinc alloy body, which puts it in the range of a single family front door or an apartment unit door. It is not built for a commercial storefront or a high traffic institutional opening, where you'd be looking at a Grade 1 cylindrical or mortise lock instead.
11) What strike plates come with the Weslock 2810, and will they match the mortise cut already in my jamb?
Round corner strikes ship with the set, both for the latch and for the deadbolt, along with the round faceplates on the latches themselves. Round corner is the common factory prep on prehung wood jambs and on most steel frames. If your existing jamb was cut for a square corner strike, the round strike will leave a visible gap at the corners of the old mortise, so you'd either fill and recut or keep the square strike you have.
12) How far does the Weslock Hillcrest handleset stick out, and how much room does it need on the door face?
The exterior handle plate measures 16.98 by 2-7/8 inches with a 2-1/2 inch projection. Inside, the rose is 2-5/8 inches in diameter with a 2-5/8 inch projection. That plate length matters on a door with a decorative glass insert or a narrow stile, so lay the 16.98 inch dimension against the flat area of the door before ordering. The projection is what tells you whether a storm door or a screen door will clear the grip when it closes.
13) What comes in the box with the Weslock 2810 Hillcrest, and do I need to buy anything else to install it?
Everything for a standard install is included: the exterior handle with the single cylinder deadbolt, the adjustable spring latch and adjustable deadbolt latch, round faceplates and round strikes, the round foot cap screw, assembly screws and wood screws, the interior deadbolt rosette and passage rosette with spindle on a mounting plate, the interior trim, plus instructions. On a door already bored to the pattern, you need a screwdriver and nothing else. On a blank door you'd need a boring jig and a hole saw, which are not part of the set.
14) What is a comparable single cylinder entry handleset if the Weslock Hillcrest is not the look I want?
For the same job, a keyed single cylinder entry handleset on a residential door, ZenSupply carries the Schlage Residential F60 Addison with the Accent lever, a Grade 2 set rated for 1-3/8 to 1-3/4 inch doors, and the Pamex FS7P31 Lexington in satin nickel, also 1-3/8 to 1-3/4 inch. The Master Lock HDLB Series HDLBA0615/4D is another Grade 2 single cylinder deadbolt handleset. All three are the same function as the Hillcrest, so the decision comes down to styling, keyway, and what the rest of the building is already keyed to.
15) I want a keypad or smart lock instead of a key on my front handleset. What should I look at?
The Hillcrest is a mechanical key set, no electronics. If you want keyless entry with the same handleset look, ZenSupply carries the Yale Real Living Assure Lock touchscreen deadbolts with the Ridgefield handleset, including the standalone BYRD226NRRX and the Wi-Fi BYRD256 CBARX, all rated for 1-3/4 to 2-1/4 inch doors. Kwikset's 815SCEHFL-CP913CNT San Clemente pairs a Halifax lever handleset with a SmartCode keypad deadbolt on a 1-3/4 inch door. Note those thickness ranges start at 1-3/4, so they're a different fit envelope than a set that starts at 1-3/8.
16) What handleset should I use if the tenant does not need a key on the front entry?
For a non-keyed opening, the Schlage Residential JE285 Barcelona style handleset with Seville lever is a Grade 2 J Series handleset in a non-keyed entry function for 1-3/8 inch to 1-3/4 inch doors. The Weslock 2810 Hillcrest is keyed, single cylinder entry, with a 5 pin Weslock keyway. If the goal is entry without a physical key rather than no lock at all, the Yale Real Living BYRD256 CBARX Assure key free touchscreen deadbolt with Ridgefield passage handleset and trim covers 1-3/4 inch to 2-1/4 inch doors.
17) Is there a keypad or smart handleset alternative to the Weslock 2810 Hillcrest for a rental turnover?
Yes. The Kwikset 815SCEHFL-CP913CNT San Clemente handleset with Halifax lever interior trim pairs a contemporary SmartCode keypad electronic deadbolt with SmartKey, RCAL latch and RCS strike, in the Signature Series for 1-3/4 inch doors. The Yale Real Living BYRD226CBARX Assure Lock Wi-Fi Bluetooth touchscreen deadbolt with Ridgefield handleset covers 1-3/4 inch to 2-1/4 inch doors. The Weslock 2810 Hillcrest is a mechanical single cylinder entry set with a Weslock 5 pin cylinder, and it is orderable keyed alike across a set of doors.
18) I need a solid brass entry handleset instead of zinc - what are my options?
Deltana offers several solid brass entry handlesets: the 803871B Hanover, the 815871 St. Ann and the 825871 Kingston, all in entry function. The Deltana 810871 Montego handleset covers a 1-3/8 inch to 2 inch door thickness range, the same range as the Weslock 2810 Hillcrest, which is zinc alloy in a round rose design with the New Haven lever.
19) Do I need a handleset or an interconnected lock for a unit entry door?
The Schlage Residential JI18/19 is an interconnected passage lock with a keyed deadbolt and Torino lever in satin stainless steel, Grade 2, JI Series, for 1-3/8 inch to 1-3/4 inch doors - it puts a lever and deadbolt on one interconnected chassis with no exterior grip handle. The Weslock 2810 Hillcrest is a single cylinder entry handleset with an exterior grip and a New Haven lever inside, using a standard 5-1/2 inch center to center door prep with a 2-1/8 inch cross bore and adjustable 2-3/8 inch to 2-3/4 inch latches.
20) When would a double cylinder entry set be used instead of the Weslock 2810 Hillcrest?
The Weslock 2810 Hillcrest is single cylinder - key outside, thumbturn inside. A double cylinder set such as the Baldwin Estates 6542 Tremont double cylinder entry mortise trim takes a key on both sides, which is used on doors with adjacent glass where an inside thumbturn could be reached; note that mortise trim for a 1-3/4 inch door mounts to a mortise lock body rather than a bored prep. Baldwin also lists the 6542 Tremont in a single cylinder entry version.
21) What finishes does the Weslock Hillcrest handleset come in, and can I get them all in both handings?
Three finishes: satin nickel, oil rubbed bronze, and matte black. Each one is built in both left hand and right hand, so a building with doors swinging both ways can still be finished consistently. Matte black and oil rubbed bronze are the two darker options if you're matching existing dark hardware; satin nickel is the brighter one.
22) What is the difference between a handleset with a knob interior and one with a lever interior?
The Baldwin Wesley handleset is offered with a knob interior in two trims - the 180WYHXATK with the Alcott knob and the 180WYHXCYK with the Carnaby knob - both in entrance function. The Weslock 2810 Hillcrest comes with the New Haven lever as the interior trim on a round rose. A lever is the choice where ADA-style operation without grasping or twisting matters, such as common-area and accessible unit doors.
How fast can I get the Weslock R2810-2X2FR2D delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Weslock R2810-2X2FR2D come with a warranty?
Absolutely. The Weslock R2810-2X2FR2D is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Weslock R2810-2X2FR2D?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Weslock R2810-2X2FR2D from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!