Weslock 2810 Hillcrest Single ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$174.50
$91.83
Weslock Weslock 2810 Hillcrest Single Cylinder Handleset with Salem Knob, Adjustable Latch and Round Corner Strikes WES-2810-S

Weslock 2810 Hillcrest Single Cylinder Handleset with Salem Knob, Adjustable Latch and Round Corner Strikes

(No reviews yet) Write a Review

Model: 02810-NSNFR2D
From the Premiere Essentials Collection
$174.50
$91.83
Selected Finish is
Selected Trim Design is
Selected Free Keying Option is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$174.50
$91.83
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

WESLOCK HILLCREST SINGLE CYLINDER HANDLESET OVERVIEW

Premiere Essentials Hillcrest entry handle with a single cylinder deadbolt that comes with adjustable spring latch & adjustable dead bolt latch, round faceplate & round strike, round foot cap screw, and assembly screws with wood screws. Interior Round Single Cylinder Deadbolt rosette with Passage rosette with spindle attached to mounting plate, and a non-handed Hudson knob. Easy to follow instructions.

 

Standard features

  • Exceeds ANSI Grade 2 Lock Standards
  • Weslock 5-pin cylinder Keyway
  • Standard 5-1/2" center to center door prep, and adjustable 2-3/8" to 2-3/4" latches
  • Fits 1-3/8" to 2-1/4" door thickness & with a adjustable foot screw
  • Dual square spindle design
  • Limited Warranty

Manufacturer Resources

Product Specs

Product Group:
Mechanical Locks
Series:
Premiere Essentials
Warranty:
Limited 25 Year Mechanical and Limited 5 Year Finish
Collection:
Premiere Essentials
Cross Bore:
2-1/8"
Keyed:
Yes
Product Subgroup:
Bored Locksets
Product Type:
Handlesets
Subcategory:
Residential Handlesets
Keyed Function:
Single Cylinder
Commercial/Residential:
Residential
Cylinder and Keyways:
5 Pin Cylinder, Weslock Keyway
Lock Function:
Entry
IMAP Policy:
Yes
Backset (Distance):
2-3/8 or 2-3/4
Product Function:
Single Cylinder
Door Thickness Range:
1-3/8" to 2"
Product Design:
Round Rose
Product Dimension:
16.98" x 2-7/8" with 2-1/2" Projection Handleset Exterior and 2-5/8" Diameter Rose with 2-5/8" Projection Interior
Door Strike:
Round Corner Strike
Product Category:
Mechanical Locks
Product Substrate:
Zinc Alloy
Department:
Door Hardware

Weslock 02810-NSNFR2D – Frequently Asked Questions

1) Will the Weslock 2810 Hillcrest handleset fit my existing door prep?
The 2810 Hillcrest drops onto standard residential entry prep: 5-1/2 inch center-to-center between the handle bore and the deadbolt, a 2-1/8 inch cross bore, and latches that adjust between 2-3/8 and 2-3/4 inch backset, so you don't have to know which backset your door was bored for before you order. If your existing entry set is on 5-1/2 inch centers, this replaces it without new boring.
2) Does the Weslock Hillcrest handleset lock with a key from inside?
No. It's a single cylinder entry set, so the key works the outside only and the inside deadbolt is a thumbturn. That's what you want on a door with glass nearby only if code and your own judgment allow it, since anyone reaching the turn can open the door. If you need key operation on both sides, look at a double cylinder set such as the Baldwin Estates 6542 Tremont double cylinder entry mortise trim.
3) Can I key the Weslock 2810 handleset to match the other locks on the house?
Yes, within Weslock. The cylinder is a 5-pin Weslock keyway, and you pick keyed alike or keyed different when you order, with a key code field if you're matching an existing Weslock system. It will not key into a Kwikset or Schlage system, so a house standardized on SC1 or KW1 would need the deadbolt rekeyed by a locksmith or a different brand entirely.
4) Does the Weslock 2810 Hillcrest handleset come with the interior knob and deadbolt, or is it exterior only?
It's a complete set. You get the exterior Hillcrest handle with the single cylinder deadbolt, the interior round rose deadbolt turn and passage rose with spindle on a mounting plate, a non-handed knob, adjustable spring latch and adjustable deadbolt latch, round faceplates, round corner strikes, foot cap screw, and the assembly and wood screws. Nothing else is needed to hang it on a bored door.
5) What is the closest equivalent to the Weslock 2810 Hillcrest handleset from another brand?
The Schlage Residential F60 Addison single cylinder keyed entry handleset with Accent lever is the nearest match. Both are keyed single cylinder entry handlesets for residential doors: the Weslock 2810 Hillcrest is an entry function single cylinder handleset fitting 1-3/8 inch to 2 inch doors, and the F60 Addison is a Grade 2 entrance function handleset fitting 1-3/8 inch to 1-3/4 inch doors. The differences a buyer feels are the interior trim and the keyway - the Hillcrest carries a Salem knob on a round rose with a 5 pin Weslock keyway, while the Addison carries a lever.
6) Which single cylinder handleset works on a 2 inch thick entry door?
The Weslock 2810 Hillcrest single cylinder handleset covers 1-3/8 inch through 2 inch door thickness and includes an adjustable foot screw to take up that range. Among comparable entry handlesets, the Deltana 810871 Montego covers the same 1-3/8 inch to 2 inch range. Handlesets such as the Schlage Residential F60 Addison and the Pamex FS7P31 Lexington stop at 1-3/4 inch, and the Kwikset 687AMD Amador and 687BW Belleview are specified at 1-3/4 inch, so a thicker slab points to the Hillcrest or the Montego.
7) Is the Emtek 3002 Memphis handleset a substitute for a Weslock 2810 Hillcrest?
No. The Emtek 3002 Memphis brass mortise entrance handleset is a dummy function unit, and so are the Emtek 3004 Hamilton, 3005 Melrose and 3006 Manhattan. Dummy trim has no cylinder and no latch operation - it is surface mounted decorative trim for an inactive leaf. The Weslock 2810 Hillcrest is a keyed single cylinder entry handleset with an adjustable spring latch and adjustable deadbolt latch. Ordering an Emtek 3000 series dummy in place of the Hillcrest leaves the door with no lock.
8) Does the Kwikset 687AMD Amador handleset include the interior trim like the Weslock 2810 Hillcrest does?
No. The Kwikset 687AMD Amador single cylinder handleset is supplied as exterior only, in both the SmartKey version and the SC1 keyway SmartKey version, as is the Kwikset 687BW Belleview. The Weslock 2810 Hillcrest ships as a complete set: exterior handle plus an interior single cylinder deadbolt rosette and passage rosette with the spindle attached to the mounting plate and a non-handed knob. If an exterior only unit is ordered, the inside trim has to come from somewhere else.
9) Can I key a Weslock 2810 Hillcrest alike with Kwikset or Schlage handlesets already on the property?
Not across brands. The Weslock 2810 Hillcrest uses a 5 pin Weslock keyway and can be ordered keyed alike or keyed different within Weslock. The Kwikset 687AMD Amador is offered as a SmartKey version and as an SC1 keyway SmartKey version, which are different keyway families. A property standardizing one key should keep the whole opening group on one brand keyway rather than mixing the Hillcrest into a Kwikset or Schlage keying scheme.
10) How far does the Weslock 2810 handleset stick out from the door?
The exterior handle projects 2-1/2 inches off the face and the overall trim measures 16.98 x 2-7/8 inches. Inside, the rose is 2-5/8 inches in diameter with a 2-5/8 inch projection. Worth checking against a storm door or screen door, since a 2-1/2 inch exterior projection needs clearance to swing past.
11) Do I need to specify handing for the Weslock Hillcrest handleset?
No handing to specify. The Salem knob is non-handed and the dual square spindle design lets the set go on a left or right hand door, so one part number covers both swings. Useful if you're buying several for a building and don't want to sort them by opening.
12) Is the Weslock Hillcrest handleset strong enough for a rental or commercial entrance?
It's built to residential duty and the description states it exceeds ANSI Grade 2 lock standards, which puts it above the Grade 3 tier common on builder-grade entry sets. For apartments, single family rentals and light multi-family, that holds up. For a high-traffic commercial entrance you want a commercial mortise or bored lock rather than a residential handleset.
13) What else could I use instead of the Weslock 2810 handleset on a 1-3/8 inch door?
The Deltana 810871 Montego handleset covers the same 1-3/8 to 2 inch thickness range. If your door is 1-3/8 to 1-3/4 inches, the Schlage Residential F60 Addison with Accent lever is a Grade 2 keyed entry handleset and the Pamex FS7P31 Lexington is a single cylinder handleset in satin nickel. All are lever or knob entry sets on a bored door, so the swap is a like-for-like trim change rather than a new prep.
14) Should I get a keyed handleset like the Weslock 2810 or go to a keypad deadbolt?
The 2810 is a straight mechanical entry set: 5-pin Weslock cylinder, key outside, turn inside, no power and nothing to fail. Choose it when you want a single key for the door and no batteries in the loop. If you're managing turnover or want codes instead of keys, the Yale Real Living Assure Lock touchscreen deadbolts with the Ridgefield handleset cover 1-3/4 to 2-1/4 inch doors, or the Kwikset 815SCEHFL San Clemente pairs a Smartcode keypad deadbolt with a handleset at 1-3/4 inches. Note those thicker-door ranges start where the Weslock's ends.
15) Will the round corner strikes on the Weslock 2810 fit my existing frame mortise?
The set ships round corner strikes and round faceplates on both latches. Most residential jambs are prepped with radius corner strikes, so it usually drops in. If your frame was cut for a square corner strike, the round plate will leave a small gap at the corners of the mortise, which is cosmetic and easy to chisel square.
16) Is the Weslock Hillcrest an exterior-only trim or a full lockset?
Full lockset. Some handlesets sold to match an existing interior, like the Kwikset 687 Amador and 687 Belleview, are exterior only and expect you to already have interior trim. The Hillcrest includes both sides plus both latches and strikes, so it's the right buy when you're replacing a whole entry set rather than just refreshing the outside.
17) I want a handleset with a keypad instead of a key - what replaces the Weslock 2810 Hillcrest?
The Weslock 2810 Hillcrest is mechanically keyed, using a 5 pin Weslock keyway. For a keypad entry on the same style of exterior handle, the Kwikset 815SCEHFL San Clemente handleset pairs a Halifax lever interior with a contemporary SmartCode keypad electronic deadbolt on a 1-3/4 inch door. The Yale Real Living BYRD226NRRX Assure Lock is a standalone touchscreen deadbolt with the Ridgefield handleset for 1-3/4 inch to 2-1/4 inch doors, and the BYRD226CBARX adds Wi-Fi and Bluetooth on the same thickness range.
18) Which handleset do I use on a door that does not need to lock, like an inactive or interior entry leaf?
The Weslock 2810 Hillcrest is keyed with a single cylinder deadbolt, which is more hardware than an unlocked opening needs. The Schlage Residential JE285 Barcelona style handleset with Seville lever is a non-keyed entry function Grade 2 unit for 1-3/8 inch to 1-3/4 inch doors. If the opening needs a latch and a separate keyed deadbolt tied together instead, the Schlage Residential JI18/19 is an interconnected passage lock with keyed deadbolt and Torino lever, also Grade 2 for 1-3/8 inch to 1-3/4 inch doors.
19) How does the Weslock 2810 Hillcrest compare on grade to other residential handlesets?
The Weslock 2810 Hillcrest is a residential handleset that exceeds ANSI Grade 2 lock standards. Among comparable entrance handlesets, the Schlage Residential F60 Addison and the Master Lock HDLB series single cylinder deadbolt handleset are both Grade 2, while the Kwikset 687AMD Amador and 687BW Belleview are Grade 3. Buyers standardizing a multi-family or rental portfolio on one grade should sort by that number before finish.
20) What is a solid brass alternative to the Weslock 2810 Hillcrest handleset?
The Weslock 2810 Hillcrest is built in zinc alloy. For a solid brass entry handleset, Deltana offers the 803871B Hanover, the 815871 St. Ann and the 825871 Kingston, all entry function solid brass handlesets. The Deltana 810871 Montego is the one in that group that matches the Hillcrest door thickness range of 1-3/8 inch to 2 inch.
21) I want a handleset with a knob inside rather than a lever - what are my options?
The Weslock 2810 Hillcrest pairs its exterior handle with a Salem knob on a round rose interior, offered in Oil Rubbed Bronze, Matte Black and Satin Nickel. Baldwin also builds the Wesley handleset with knob interiors: the 180WYHXATK is the Wesley handleset with Alcott knob and the 180WYHXCYK is the Wesley handleset with Carnaby knob, both entrance function. Most of the other comparable entry handlesets, such as the Schlage F60 Addison with Accent lever, carry lever trim inside instead.
22) What handleset fits a door thicker than 2 inches?
The Weslock 2810 Hillcrest tops out at 2 inch door thickness. For a thicker slab, the Yale Real Living Ridgefield handleset units cover 1-3/4 inch to 2-1/4 inch: the BYRD226NRRX standalone touchscreen deadbolt, the BYRD226CBARX Wi-Fi and Bluetooth version, and the BYRD256 CBARX key free touchscreen deadbolt with the Ridgefield passage handleset and trim. These are touchscreen deadbolt sets rather than mechanical key entry, so the tradeoff is electronics for the added thickness range.
23) Is the Pamex FS7P31 Lexington the same thing as a Weslock 2810 Hillcrest?
They are close but not identical. The Pamex FS7P31 Lexington is a single cylinder handleset with entry function in a satin nickel finish for 1-3/8 inch to 1-3/4 inch doors. The Weslock 2810 Hillcrest is also a single cylinder entry handleset and is offered in Satin Nickel, but it carries the range up to 2 inch doors and ships with adjustable 2-3/8 inch to 2-3/4 inch latches and round corner strikes. On a 1-3/4 inch door in satin nickel the two land in the same place; above that thickness they do not.
24) What finishes does the Weslock 2810 Hillcrest handleset come in?
Three: oil rubbed bronze, matte black, and satin nickel, all with the Salem knob. If you're matching a fleet of doors, note the set is zinc alloy with a plated finish rather than solid brass, so it won't living-finish or patina the way a solid brass handleset does.
How fast can I get the Weslock 02810-NSNFR2D delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Weslock 02810-NSNFR2D come with a warranty?
Absolutely. The Weslock 02810-NSNFR2D is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Weslock 02810-NSNFR2D?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Weslock 02810-NSNFR2D from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!