Wide Range Distribution Grip
16477 - spec sheet
Features
- One-Handed Grip
- Patent pending design
- Max Safe Load of 5000-Pound (2268 kg)
- Large opening in the handle accommodates a wide variety of hooks on hoists, winches and tackle blocks
- One-handed design makes for easier actuation
- Wide Range Distribution Grip pulls No. 6 Copper to No. 477 ACSR 0.162 to 0.883-Inch (4.11 to 22.42 mm) cable
- Spring closes grip on cable to hold the initial position
- Made in the USA
- 20-Percent lighter than the Cat. No. KT4500 grip
Warnings
- Do not exceed rated capacity.
- When used on/or near energized lines, ground, insulate, or isolate grip before pulling.
- Grips are to be used for temporary installation, not for permanent anchorage.
- Always match proper size and type of grip to application.
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
16477 - spec sheet
Manufacturer Resources
Product Specs
- Cable Diameter:
- 0.162 to 0.883" (4.11 to 22.42 mm)
- Cable Type:
- Bare Copper, Aluminum, ACSR
- Depth:
- 10.0000 in
- Height:
- 1.2500 in
- Hot Latch:
- No
- Jaw Length:
- 3.31" (8.4 cm)
- Jaw Type:
- Round
- Locking Handle:
- No
- Material:
- Steel
- Maximum Safe Load:
- 5000 lb (2268 kg)
- Overall Height:
- 1.25" (3.2 cm)
- Overall Length:
- 10" (25 cm)
- Overall Width:
- 6.5" (16.5 cm)
- Spring:
- Yes
- Swing Latch:
- No
- Type:
- Parallel Jaw Grip
- Weight:
- 2.9000 lbs
- Width:
- 6.5000 in