Klein Tools 11046 Wire Strippe...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$75.24
$19.67
Klein Tools 11046 Wire Stripper/Cutter 16-26 AWG Stranded

Klein Tools 11046 Wire Stripper/Cutter 16-26 AWG Stranded

(No reviews yet) Write a Review

Model: 11046
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$75.24
$19.67
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Wire Stripper/Cutter 16-26 AWG Stranded

  • Warnings

    • Do NOT use to cut steel wire or bolts
    • NOT insulated. Plastic-dipped or slip-on plastic handles are NOT intended for protection against electrical shock.
    • Always wear approved eye protection.

  • Features

    • Textured handles provide a firm, comfortable grip
    • Do not use for cutting steel wire or bolts
    • Black-oxide finish resists corrosion
    • Shear-type cutting blades for clean cuts
    • Hardened steel with precision ground stripping holes and spring-loaded action for self-opening
    • Narrow nose fits into tight places
    • Made in USA
    • Compact, lightweight wire-stripping and cutting tool
    • Easy-to-read wire gauge markings on both sides for stripping in either direction
    • Wire looping and bending holes


11046 - spec sheet

Manufacturer Resources

Spec Sheet

Product Specs

Handle Color:
Red
Handle Finish:
Textured
Item Depth:
6.2500 in
Item Height:
0.6500 in
Item Weight:
0.2700 lbs
Item Width:
2.0000 in
Overall Length:
6.25" (15.9 cm)
Replacement Parts:
11074
Strips And Cuts:
16-26 AWG Stranded
Department:
Electrical
Product Group:
Hand Tools
Product Subgroup:
Wire Strippers & Crimpers
Product Material:
Steel
Product Weight:
4.3 oz (122 g)
Product Type:
Wire Stripper
Product Height:
0.65 in
Product Width:
2 in
Product Depth:
6.25 in
Country of Origin:
United States

Klein Tools 11046 – Frequently Asked Questions

1) What wire sizes will the Klein 11046 stripper handle?
The Klein Tools 11046 strips and cuts 16 to 26 AWG stranded wire. It's sized for control, low-voltage, and electronics work, not building branch circuits. If you're pulling 12 and 14 AWG solid romex, this is the wrong tool for that range.
2) Can I use this Klein stripper on solid copper wire?
The 11046 is marked for 16-26 AWG stranded. Stranded and solid of the same gauge don't have the same outside diameter, so the precision ground stripping holes are cut for the stranded sizes. For solid-wire work, pick a stripper whose gauge markings call out solid.
3) Is the Klein 11046 wire stripper insulated for live work?
No. The handles are plastic-dipped but not rated insulation, and the tool is not intended for protection against electrical shock. De-energize the circuit before using it. Klein's insulated tools are a separate 1000V-rated line.
4) Will this fit in a crowded junction box or panel gutter?
It's built for that. Overall length is 6.25 inches (15.9 cm), about 2 inches wide and 0.65 inch thick, with a narrow nose that reaches into tight places. At 4.3 oz (122 g) it rides in a shirt pocket or pouch without weighing on you.
5) Can the 11046 cut small screws or steel wire?
No, and doing it will wreck the blades. Klein warns against cutting steel wire or bolts with this tool. The shear-type blades are for copper conductors in the 16-26 AWG stranded range. Use a bolt cutter or a dedicated screw-cutting stripper for hardened material.
6) Does this stripper make the loop for a screw terminal, or do I need a second tool?
Wire looping and bending holes are built into the 11046, so you can strip, cut, and form the hook for a terminal screw with the one tool. That's the main reason it lands in low-voltage and device-termination kits.
7) Do I have to hold this Klein stripper a certain way to read the gauge marks?
No. Gauge markings are stamped on both sides, so you can strip from either direction without flipping the tool over. It's also spring-loaded for self-opening, which matters when you're stripping a hundred conductors one-handed off a ladder.
8) Will the Klein 11046 rust in a damp service van or outdoor tool bag?
The tool is hardened steel with a black-oxide finish that resists corrosion. Black oxide is a conversion coating, not a barrier plating, so wipe it down and keep a light oil on it if it lives in a wet environment.
9) Is there a replacement part available for this Klein stripper?
Yes, Klein lists part 11074 as the replacement part for the 11046.
10) Is the Klein 11046 made in the USA, and what's the exact part number to order?
Order it as Klein Tools 11046. It's made in the USA, with red textured handles for grip. Buyers standardizing a fleet of tool kits can spec that single MPN.
How fast can I get the Klein Tools 11046 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Klein Tools 11046 come with a warranty?
Absolutely. The Klein Tools 11046 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Klein Tools 11046?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Klein Tools 11046 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!