Accentra 112 Single Cylinder A...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$184.47
$120.46
Yale Commercial 112 Single Cylinder Auxiliary Deadbolt

Accentra 112 Single Cylinder Auxiliary Deadbolt with 5-Pin Rim Cylinder

(No reviews yet) Write a Review

Model: 112

In Stock (leaves warehouse same day if ordered before 3pm ET)

$184.47
$120.46
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Accentra 112 Single Cylinder Auxiliary Deadbolt with 5-Pin Rim Cylinder

Professional Auxiliary Security Solution

The Accentra 112 Single Cylinder Auxiliary Deadbolt provides enhanced security for commercial and residential applications with a 5-pin rim cylinder and 1-1/8" deadbolt throw. This non-handed deadbolt accommodates door thicknesses from 1-3/8" to 2-1/4" with a standard 2-3/8" backset. The unit features a 180° thumbturn operation for interior control and includes an angled strike for proper door alignment.

Professional Features & Benefits

  • Outside: Furnished standard with 5-pin rim cylinder 1109E.
  • Inside: 180° turn of the thumbturn throws or retracts deadbolt. Also available with flat strike, model no. 112F (for outswinging doors).
  • Backset Depth (Standard): 2-3/8"
  • Latchbolt Throw: 1-1/8"
  • Maximum Door Thickness: 2-1/4"
  • Minimum Door Thickness: 1-3/8"
  • Cylinder Pins: 5 pin
  • Cylinder Type: Rim
  • Handing: Non-handed
  • Number of Keys: 2
  • Strike Type: Angled
  • UL Listed: No
  • ULC Listed: No
  • Warranty: 1-year warranty

Installation & Operation

  1. Review manufacturer specifications and verify door preparation requirements including door thickness between 1-3/8" and 2-1/4", and 2-3/8" backset compatibility.
  2. Use manufacturer-provided templates to mark mounting hole locations accurately on door and frame surfaces for deadbolt and strike installation.
  3. Prepare door and frame by drilling required holes and routing as specified in manufacturer instructions for proper deadbolt and strike alignment.
  4. Install all mounting hardware and secure the deadbolt unit to door and angled strike to frame per manufacturer torque specifications.
  5. Adjust operational components for proper alignment, ensuring smooth 180° thumbturn operation and complete 1-1/8" deadbolt throw engagement.
  6. Test device operation to verify proper function including key operation, thumbturn engagement, and deadbolt alignment with strike. Refer to manufacturer documentation for complete installation details and troubleshooting.

Professional Applications

  • Commercial Office Buildings
  • Educational Facilities
  • Healthcare Institutions
  • Retail Establishments
  • Multi-Tenant Residential Properties
  • Government and Municipal Buildings
  • Auxiliary Security for High-Traffic Areas

Why Choose Accentra Quality?

Accentra auxiliary deadbolt products deliver professional-grade reliability with 5-pin rim cylinder security and precision-engineered deadbolt mechanisms. The 1 Year Mechanical warranty provides added confidence for demanding commercial applications. Engineered for dependable performance where enhanced security and key control are essential.

Manufacturer Resources

Auxiliary Locks Catalog

Product Specs

Warranty:
1 Year Mechanical
Product Group:
Mechanical Locks
Product Subgroup:
Bored Locksets
Cylinder Classification:
Rim
Number of Keys Available:
2
Backset (Distance):
2-3/8"
Department:
Door Hardware
Product Type:
Auxiliary Locks

Accentra 112 – Frequently Asked Questions

1) Will the Accentra 112 auxiliary deadbolt fit a 1-3/4 inch commercial door?
Yes. The 112 auxiliary deadbolt covers door thicknesses from 1-3/8 inches up to 2-1/4 inches, so a standard 1-3/4 inch commercial door sits in the middle of the range. That range also takes in the thinner 1-3/8 inch doors common in older interior openings and the thick doors you find on entrances, so one part number covers most of a building without sorting by leaf thickness.
2) Angle strike or flat strike on the Accentra 112 deadbolt, which one do I order?
It depends on which way the door swings. The 112 comes with an angled strike as standard, which is what you want on an inswinging door where the strike mounts in the frame rebate. For an outswinging door, order the flat strike version, model 112F. Both strike types are orderable choices on the 112, so pick the one that matches the opening before you order, since the strike is what gets mortised into the frame.
3) Do I have to order a left hand or right hand version of the Accentra 112 deadbolt?
No handing to specify. The 112 auxiliary deadbolt is non-handed, so the same unit works on a left or right hand door. The only ordering decision tied to the opening is the strike: angled for inswing, flat (112F) for outswing.
4) What door prep does the Accentra 112 auxiliary deadbolt need, and will it drop into an existing deadbolt hole?
The 112 is bored for a 2-3/8 inch backset, measured from the door edge to the center of the bore. That is one of the two standard backsets used on bored locks, the other being 2-3/4 inch, so if the existing hole in your door is at 2-3/4 inch it will not line up and you would be re-boring. Check the backset on the door you are replacing before ordering. Frame side, the deadbolt throws 1-1/8 inches into the strike, which means the strike pocket has to be routed deep enough to take the full bolt.
5) Is the Accentra 112 deadbolt keyed on both sides or is there a thumbturn inside?
Single cylinder. Key operates the bolt from the outside through a 5-pin rim cylinder, and inside there is a thumbturn that throws or retracts the bolt with a 180 degree turn. That matters for egress: nobody needs a key to get out, which is why single cylinder is the usual choice on occupied units and offices. If your situation calls for key operation from both sides, this is not that product.
6) Can I key the Accentra 112 auxiliary deadbolt to match the other locks in my building?
The 112 ships with a 5-pin rim cylinder, model 1109E, and two keys. Because it is a rim cylinder rather than a mortise cylinder, keying it into an existing system means your keyway and pinning have to work with a rim housing. A locksmith can rekey the furnished 1109E to your system, but the cylinder format is the constraint to check first if the rest of the building runs mortise cylinders.
7) What is an auxiliary deadbolt and do I still need a lockset on the door?
An auxiliary deadbolt like the 112 is a second, separate lock that adds a bolt to the door. It has no latch and no handle, so it does not hold the door closed and does not let anyone through the opening. You install it above or below the existing knob or lever set, which still does the latching and the day-to-day operation. If you want one device that both latches and deadbolts, that is a deadlatch or an interconnected lock, not this.
8) Is a 1-1/8 inch deadbolt throw enough to secure a door with a gap at the frame?
The 112 throws 1-1/8 inches. That is a long throw for a bored deadbolt and it gives you real engagement into the frame even where the door has settled and the gap has opened up a little. The practical limit is the strike: the pocket behind it must be routed to take the full 1-1/8 inches, or the bolt bottoms out and never fully extends. On a frame with a shallow existing cutout, plan to deepen it.
9) How many keys come with the Accentra 112 deadbolt?
Two keys ship with each 112 auxiliary deadbolt, cut to the furnished 5-pin rim cylinder. If you are securing a unit where a tenant, a super and a service contractor all need access, plan on having extra keys cut or the cylinder rekeyed into a master system.
How fast can I get the Accentra 112 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Accentra 112 come with a warranty?
Absolutely. The Accentra 112 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Accentra 112?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Accentra 112 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!