Metallics JSPMP5SS 10-24 x 1-1...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.64
$0.64
Metallics JSPMP5SS 10-24 x 1-1/2 in. Pan Head Phillips Machine Screws - 18-8 Stainless - 100qty

Metallics JSPMP5SS 10-24 x 1-1/2 in. Pan Head Phillips Machine Screws - 18-8 Stainless - Each

(No reviews yet) Write a Review

Model: JSPMP5SS
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.64
$0.64
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
10-24 x 1-1/2 in. Pan Head Phillips Machine Screws - 18-8 Stainless - 100qty

  • Features

    • Pan head with Phillips Drive
    • 18-8 Stainless Material
    • 10-24 Diameter, 1-1/2" Length

  • Additional Notes

    • Other sizes and quantities available by request | Tensile strength values for stainless screws are offered as approximations only; there is no single standard for the performance requirements of stainless machine screws.

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.6.3-2010
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Height:
0.122 - 0.133 in.
Fastener Head Type:
Pan
Fastener Head Width:
0.357 - 0.373 in.
Fastener Length:
1/1/02
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Hardness:
Rockwell BBS-B9S
Language Code:
EN
Material Standard:
SAE
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Pan_Head_Screw_St_SS.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Phillips Recess Diameter:
0.192
Product Group:
Fasteners
Product Height:
2.7 in
Product Length:
3 in
Product Weight:
1.15 lbs
Product Width:
3 in
Recess Penetration Gaging Depth:
0.089 - 0.113
Sub Division:
Electrical-E H2
Tensile Strength:
80000 psi minimum
Thread Per Inch:
24
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
SPMP
Product Details:
Machine Screw
Product Material:
18-8 Stainless

Metallics JSPMP5SS – Frequently Asked Questions

1) Are these stainless screws OK for outdoor or damp locations?
They are 18-8 stainless, which is the usual choice for wet locations, exterior boxes, and coastal or washdown areas where plated steel screws rust and seize. 18-8 is not as corrosion resistant as 316 in heavy salt exposure, but for general damp and outdoor electrical, plumbing, and HVAC work it holds up.
2) Can I use these on a federal or Buy American job?
No. The JSPMP5SS is not Buy American compliant and not ARRA compliant, with country of origin listed as multiple. For a job with domestic sourcing requirements you need a fastener certified to that requirement instead.
3) How many screws come in a jar of Metallics JSPMP5SS?
They ship in a jar of 100, and 100 is the order minimum, so the smallest purchase is one full jar rather than a single screw.
4) What size Phillips driver or bit do I need for these 10-24 pan head screws?
A #2 Phillips. The recess diameter is 0.192 in. with a gaging depth of 0.089 to 0.113 in., which is the standard #2 recess, so a worn or undersized bit will cam out before the screw seats.
5) How much does the pan head stick up, and will it clear a cover plate?
Head height runs 0.122 to 0.133 in. with a head width of 0.357 to 0.373 in. That is a low, broad profile typical of a pan head, so it sits nearly flush under a device plate and spreads load on sheet metal or a strap without needing a countersink.
6) Do these machine screws meet a dimensional spec I can put on a submittal?
Head, recess, and thread dimensions follow ASME B18.6.3-2010, the inch-series machine screw standard, with material to SAE. Tensile strength is listed at 80,000 psi minimum and hardness at Rockwell BBS-B9S. Note that stainless machine screws have no single performance standard, so treat strength figures as approximate.
7) Will a machine screw work in wood or drywall?
No. A machine screw like the JSPMP5SS has a straight, uniform 10-24 machine thread and a blunt end, so it needs a tapped hole, a threaded strap, or a nut to hold. For wood framing or drywall you want a wood screw, sheet metal screw, or an anchor, not this.
How fast can I get the Metallics JSPMP5SS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JSPMP5SS come with a warranty?
Absolutely. The Metallics JSPMP5SS is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JSPMP5SS?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JSPMP5SS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!