Metallics JSPMP4SS 10-24 x 1-1...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.59
$0.59
Metallics JSPMP4SS 10-24 x 1-1/4 in. Pan Head Phillips Machine Screws - 18-8 Stainless - 100qty

Metallics JSPMP4SS 10-24 x 1-1/4 in. Pan Head Phillips Machine Screws - 18-8 Stainless - Each

(No reviews yet) Write a Review

Model: JSPMP4SS
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.59
$0.59
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
10-24 x 1-1/4 in. Pan Head Phillips Machine Screws - 18-8 Stainless - 100qty

  • Additional Notes

    • Other sizes and quantities available by request | Tensile strength values for stainless screws are offered as approximations only; there is no single standard for the performance requirements of stainless machine screws.

  • Features

    • Pan head with Phillips Drive
    • 10-24 Diameter, 1-1/4" Length
    • 18-8 Stainless Material

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.6.3-2010
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Height:
0.122 - 0.133 in.
Fastener Head Type:
Pan
Fastener Head Width:
0.357 - 0.373 in.
Fastener Length:
1/1/04
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Hardness:
Rockwell BBS-B9S
Language Code:
EN
Material Standard:
SAE
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Pan_Head_Screw_St_SS.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Phillips Recess Diameter:
0.192
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
1.04 lbs
Product Width:
3 in
Recess Penetration Gaging Depth:
0.089 - 0.113
Sub Division:
Electrical-E H2
Tensile Strength:
80000 psi minimum
Thread Per Inch:
24
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
SPMP
Product Details:
Machine Screw
Product Material:
18-8 Stainless

Metallics JSPMP4SS – Frequently Asked Questions

1) Will the pan head sit flush enough under a cover plate or clamp?
The pan head on these 10-24 screws runs 0.357 to 0.373 in. across and 0.122 to 0.133 in. high, built to ASME B18.6.3-2010. That's a low, broad bearing surface, so it spreads load on sheet metal and thin brackets but it does sit proud of the surface. If you need the head buried flush, you want a flat head countersunk screw instead, not a pan head.
2) Are 18-8 stainless machine screws OK for outdoor or damp-location electrical work?
18-8 stainless is the usual choice for wet, damp and corrosive locations where a plated steel screw would rust and seize. These are solid 18-8 stainless throughout, not a coating, so cutting or field-trimming them doesn't expose bare steel. For marine or chloride-heavy exposure, 316 is the step up.
3) Do Metallics JSPMP4SS screws qualify for a Buy American or ARRA-funded job?
No. These are not Buy American compliant and not ARRA compliant, with multiple countries of origin. On a federally funded or domestic-preference spec you'll need a domestically sourced fastener instead.
4) How many screws come in a jar of Metallics JSPMP4SS machine screws?
The JSPMP4SS ships as a jar of 100 screws, and the jar is the minimum order quantity. If you're stocking a service truck or a maintenance crib, that's one pack type, one count, no loose counting at the counter.
5) What size Phillips driver do I need for 10-24 pan head machine screws?
A #2 Phillips. The recess on these 10-24 pan heads measures 0.192 in. diameter with a gaging depth of 0.089 to 0.113 in., so a #2 bit seats fully. Using a #1 will cam out and chew the recess on stainless.
6) How strong are these stainless screws compared to a plated steel machine screw?
Rated at 80,000 psi minimum tensile with a hardness of Rockwell BBS-B9S. Note that stainless tensile figures are approximations, since there is no single performance standard for stainless machine screws. For high-load structural work, use a graded steel fastener; these are intended for electrical, plumbing and HVAC device and bracket mounting.
7) Is a machine screw the right fastener, or do I need a self-tapping screw?
A machine screw like this one needs a pre-tapped hole or a nut, it will not form its own threads. Use it into tapped device ears, threaded bosses, strut nuts or with a 10-24 nut through a clearance hole. If you're going into bare sheet metal with no tapped hole, you want a self-drilling or sheet metal screw instead.
How fast can I get the Metallics JSPMP4SS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JSPMP4SS come with a warranty?
Absolutely. The Metallics JSPMP4SS is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JSPMP4SS?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JSPMP4SS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!