Metallics JSPM20SS 10-32 x 1 i...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.67
$0.67
Metallics JSPM20SS 10-32 x 1 in. Pan Head Slotted Machine Screws - 18-8 Stainless - 100qty

Metallics JSPM20SS 10-32 x 1 in. Pan Head Slotted Machine Screws - 18-8 Stainless - Each

(No reviews yet) Write a Review

Model: JSPM20SS
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.67
$0.67
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
10-32 x 1 in. Pan Head Slotted Machine Screws - 18-8 Stainless - 100qty

  • Additional Notes

    • Other sizes and quantities available by request | Tensile strength values for stainless screws are offered as approximations only; there is no single standard for the performance requirements of stainless machine screws.

  • Features

    • 18-8 Stainless Material
    • 10-32 Diameter, 1" Length
    • Pan head with slotted Drive

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
C
Buy American Compliant:
C
Dimensional Standard:
ASME B18.6.3-2010
Division:
Electrical H1
Drive Type:
Slotted
Fastener Head Height:
0.099 - 0.11 in.
Fastener Head Type:
Pan
Fastener Head Width:
0.357 - 0.373 in.
Fastener Length:
1
Hardness:
Rockwell BBS-B9S
Language Code:
EN
Material Standard:
SAE
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Pan_Head_Screw_St_SS.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.89 lbs
Product Width:
3 in
Slot Depth:
0.053 - 0.068
Slot Width:
0.05 - 0.06
Sub Division:
Electrical-E H2
Tensile Strength:
80000 psi minimum
Thread Per Inch:
32
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
SPM
Product Details:
Machine Screw
Product Material:
18-8 Stainless

Metallics JSPM20SS – Frequently Asked Questions

1) Are these 10-32 screws stainless, and will they hold up outdoors or in a damp location?
The material is 18-8 stainless, the common austenitic grade used where plain steel or zinc plating would rust out. That makes it a reasonable choice for exterior boxes, wash-down areas, and damp locations. Note the country of origin is listed as multiple, so the mill source can vary by lot.
2) Do these Metallics stainless machine screws meet Buy American or ARRA requirements for a public project?
Both flags are marked compliant on the JSPM20SS: Buy American compliant and ARRA compliant. That matters on federally funded and public agency work where the fastener line items get audited along with everything else.
3) How many 10-32 x 1 in. pan head screws come in a Metallics JSPM20SS jar?
They ship 100 to a jar, and 100 count is the order minimum. So you are buying by the jar, not by the piece, which is how most contractors stock 10-32 device screws on the truck.
4) What dimensional standard do these pan head slotted screws conform to?
They are built to ASME B18.6.3-2010, the standard covering machine screw head and thread dimensions, with material called out to SAE. Pan head width runs 0.357 to 0.373 in. and head height 0.099 to 0.11 in., so the head footprint is predictable if you are checking clearance in a recessed device opening.
5) How strong are 18-8 stainless 10-32 machine screws compared to a grade 5 steel screw?
Tensile is listed at 80,000 psi minimum with a Rockwell hardness of BBS-B9S. Understand that stainless machine screw strength figures are approximations, since there is no single performance standard for stainless machine screws. If you need a hard, verified clamp load on a structural connection, a graded carbon steel fastener is the right call; these are for device mounting, grounding, and general corrosion-resistant work.
6) Is a pan head the right head style for mounting a device or cover plate?
Pan head gives a flat bearing surface with a rounded top, so it sits on the surface rather than pulling into it. That is what you want on an untapered hole in a box ear, a strap, or a bracket. If your part has a countersunk 82 degree hole and you need the head flush with the surface, a flat head screw is the correct choice instead, not this pan head.
7) Can I get this Metallics SPM screw in a different length or thread size?
The JSPM20SS is specifically 10-32 x 1 in. in 18-8 stainless. Other sizes and quantities in the SPM machine screw series are available by request, so if you need the same pan head slotted stainless screw in a shorter length or a different diameter, ask for it by size rather than assuming this part covers it.
8) What is the shipping weight and jar size on a 100-count of Metallics JSPM20SS?
The packed jar is listed at 0.89 lbs and measures 3 in. by 3 in. by 2.15 in., so it drops into a van bin or a parts organizer without repacking.
How fast can I get the Metallics JSPM20SS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JSPM20SS come with a warranty?
Absolutely. The Metallics JSPM20SS is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JSPM20SS?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JSPM20SS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!