Metallics JPMP33 10-32 x 1/2 i...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.29
$0.29
Metallics JPMP33 10-32 x 1/2 in. Pan Head Phillips Machine Screws - Steel Zinc - 100qty

Metallics JPMP33 10-32 x 1/2 in. Pan Head Phillips Machine Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JPMP33
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.29
$0.29
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
10-32 x 1/2 in. Pan Head Phillips Machine Screws - Steel Zinc - 100qty

  • Additional Notes

    • Other sizes and quantities available by request | Tensile strength values for stainless screws are offered as approximations only; there is no single standard for the performance requirements of stainless machine screws.

  • Features

    • Pan head with Phillips Drive
    • Steel Zinc Material
    • 10-32 Diameter, 1/2" Length

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.6.3-2010
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Height:
0.122 - 0.133 in.
Fastener Head Type:
Pan
Fastener Head Width:
0.357 - 0.373 in.
Fastener Length:
2-Jan
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Hardness:
Rockwell B70-B100
Language Code:
EN
Material Standard:
AISI 1006 - 1022
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Pan_Head_Screw_St_SS.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Phillips Recess Diameter:
0.192
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.61 lbs
Product Width:
3 in
Recess Penetration Gaging Depth:
0.089 - 0.113
Sub Division:
Electrical-E H2
Tensile Strength:
60000 psi minimum
Thread Per Inch:
32
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
PMP
Product Finish:
Zinc
Product Details:
Machine Screw
Product Material:
Steel Zinc

Metallics JPMP33 – Frequently Asked Questions

1) Are Metallics JPMP33 screws Buy American or ARRA compliant for a government job?
No. The JPMP33 is not Buy American compliant and is not ARRA compliant, with multiple countries of origin. On a federally funded project with domestic sourcing requirements, you will need a domestically produced machine screw instead.
2) Will a machine screw work in wood or drywall?
No. The JPMP33 is a machine screw, meaning it has a uniform 10-32 machine thread meant for a pre-tapped hole or a matching nut. It will not hold in wood, drywall or unthreaded sheet metal. For those substrates use a wood screw, self-drilling sheet metal screw, or a drywall anchor with a 10-32 machine thread insert.
3) What size Phillips bit do I need for these Metallics machine screws?
A #2 Phillips. The recess on the JPMP33 pan head measures 0.192 inch in diameter with a gaging depth of 0.089 to 0.113 inch, which is the standard #2 driver geometry. Running a #1 will cam out and a #3 will not seat.
4) How much room does the pan head take up above the surface?
The head stands 0.122 to 0.133 inch tall and measures 0.357 to 0.373 inch across. That is a low-profile seat with a bearing surface wide enough to hold a slotted or punched plate without pulling through, which is why pan head is the default in panel and box work. If you need the head flush with the surface, a flat head screw in a countersunk hole is the right choice instead.
5) How are the JPMP33 screws packaged and what is the minimum order?
They come in a jar of 100, and 100 is the order minimum. Jar weight is 0.61 lbs. Handy for a van or a shop drawer rather than counted-out singles.
6) Are these steel screws strong enough for structural or load-bearing fastening?
The JPMP33 is a low-carbon steel screw made from AISI 1006 to 1022 stock with a 60,000 psi minimum tensile strength and Rockwell B70-B100 hardness. That is standard commercial machine screw strength, fine for mounting devices, straps, covers and panel hardware. It is not a graded structural bolt, so do not substitute it where a drawing calls out a grade 5 or grade 8 fastener.
7) Can I use zinc-plated machine screws outdoors or in a damp location?
The finish is zinc plating over steel, which handles indoor and dry-location work. Zinc plate gives limited corrosion resistance only, so for exterior, wet or washdown locations use a stainless machine screw of the same 10-32 x 1/2 size instead.
8) Do these machine screws meet a recognized dimensional standard for spec work?
Yes, they are built to ASME B18.6.3-2010, the standard covering inch-series machine screw dimensions including head and recess geometry. If a submittal calls for B18.6.3 pan head Phillips machine screws, the JPMP33 answers it.
How fast can I get the Metallics JPMP33 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JPMP33 come with a warranty?
Absolutely. The Metallics JPMP33 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JPMP33?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JPMP33 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!