Metallics JPMP84 8-32 x 1/2 in...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.17
$0.17
Metallics JPMP84 8-32 x 1/2 in. Pan Head Phillips Machine Screws - Steel Zinc - 100qty

Metallics JPMP84 8-32 x 1/2 in. Pan Head Phillips Machine Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JPMP84
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.17
$0.17
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
8-32 x 1/2 in. Pan Head Phillips Machine Screws - Steel Zinc - 100qty

  • Features

    • 8-32 Diameter, 1/2" Length
    • Steel Zinc Material
    • Pan head with Phillips Drive

  • Additional Notes

    • Other sizes and quantities available by request | Tensile strength values for stainless screws are offered as approximations only; there is no single standard for the performance requirements of stainless machine screws.

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.6.3-2010
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Height:
0.105 - 0.115 in.
Fastener Head Type:
Pan
Fastener Head Width:
0.306 - 0.322 in.
Fastener Length:
2-Jan
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Hardness:
Rockwell B70-B100
Language Code:
EN
Material Standard:
AISI 1006 - 1022
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Pan_Head_Screw_St_SS.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Phillips Recess Diameter:
0.175
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.43 lbs
Product Width:
3 in
Recess Penetration Gaging Depth:
0.071 - 0.097
Sub Division:
Electrical-E H2
Tensile Strength:
60000 psi minimum
Thread Per Inch:
32
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
PMP
Product Finish:
Zinc
Product Details:
Machine Screw
Product Material:
Steel Zinc

Metallics JPMP84 – Frequently Asked Questions

1) Do these screws qualify for a Buy American or ARRA funded job?
No. The JPMP84 is not Buy American compliant and is not ARRA compliant, with country of origin listed as multiple. If your project has domestic sourcing requirements, this part will not satisfy them.
2) Will an 8-32 machine screw cut its own thread into sheet metal?
No. A machine screw has a blunt, uniform 32 TPI thread and needs a tapped hole or a nut. For attaching to untapped sheet metal you want a self-tapping sheet metal screw, not this one. The JPMP84 is for pre-tapped holes such as box ears, device straps, and tapped brackets.
3) What screwdriver or bit do I need for these 8-32 pan head Phillips screws?
A #2 Phillips bit. The recess is Phillips with a 0.175 inch recess diameter and a gaging depth of 0.071 to 0.097 inch, so a #2 driver seats fully. A #1 will cam out and chew the recess.
4) How many screws do I get, and how are they packaged?
They ship in a jar of 100. The order minimum is one jar, so 100 pieces is the smallest quantity. Jar weight is 0.43 lbs.
5) Is the pan head on these Metallics screws low enough to sit under a cover plate?
Head height runs 0.105 to 0.115 inch with a head width of 0.306 to 0.322 inch, so the profile is low and broad, typical pan head. That clears under most wall plates and gives bearing surface on a slotted or oversized hole. If you need the head flush in a countersunk hole, a pan head is the wrong choice, go to a flat head.
6) Are these zinc plated steel screws OK outdoors or in a damp location?
Material is zinc plated steel, finish listed as Zinc. Zinc plating is a mild corrosion coating meant for dry interior service. For exterior, wash-down, or coastal work, specify a stainless machine screw of the same 8-32 x 1/2 size instead.
7) What strength and dimensional standard do these machine screws meet?
Dimensions follow ASME B18.6.3-2010, the standard for inch-series machine screws, so head and thread geometry are interchangeable with any other screw built to that spec. Tensile strength is 60,000 psi minimum, hardness Rockwell B70 to B100, made from AISI 1006 to 1022 steel.
8) Can I get the same Metallics pan head screw in other lengths or larger quantities?
Yes, other sizes and quantities in the PMP pan head Phillips line are available by request. The JPMP84 is the 8-32 x 1/2 inch jar; specify the diameter, length, and pack size you need.
How fast can I get the Metallics JPMP84 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JPMP84 come with a warranty?
Absolutely. The Metallics JPMP84 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JPMP84?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JPMP84 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!