Metallics JPMP4 8-32 x 1/4 in....
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.17
$0.17
Metallics JPMP4 8-32 x 1/4 in. Pan Head Phillips Machine Screws - Steel Zinc - 100qty

Metallics JPMP4 8-32 x 1/4 in. Pan Head Phillips Machine Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JPMP4
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.17
$0.17
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
8-32 x 1/4 in. Pan Head Phillips Machine Screws - Steel Zinc - 100qty

  • Additional Notes

    • Other sizes and quantities available by request | Tensile strength values for stainless screws are offered as approximations only; there is no single standard for the performance requirements of stainless machine screws.

  • Features

    • Pan head with Phillips Drive
    • 8-32 Diameter, 1/4" Length
    • Steel Zinc Material

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.6.3-2010
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Height:
0.105 - 0.115 in.
Fastener Head Type:
Pan
Fastener Head Width:
0.306 - 0.322 in.
Fastener Length:
4-Jan
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Hardness:
Rockwell B70-B100
Language Code:
EN
Material Standard:
AISI 1006 - 1022
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Pan_Head_Screw_St_SS.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Phillips Recess Diameter:
0.175
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.34 lbs
Product Width:
3 in
Recess Penetration Gaging Depth:
0.071 - 0.097
Sub Division:
Electrical-E H2
Tensile Strength:
60000 psi minimum
Thread Per Inch:
32
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
PMP
Product Finish:
Zinc
Product Details:
Machine Screw
Product Material:
Steel Zinc

Metallics JPMP4 – Frequently Asked Questions

1) Will the Metallics JPMP4 8-32 screw work for mounting device plates and receptacles in an electrical box?
8-32 is the standard machine screw thread used for device and cover plate mounting, and the JPMP4 is an 8-32 x 1/4 in. pan head Phillips machine screw in zinc plated steel. At 1/4 inch long it is short, so it suits shallow tapped holes like plate and strap mounting rather than anything needing depth through a thick plate stack. Metallics lists the series for the electrical, plumbing, heating and air conditioning trades.
2) Will zinc plated steel screws hold up outdoors or in a wet location?
The JPMP4 has a zinc finish over carbon steel, which is a dry indoor plating. For damp, outdoor or washdown work use a stainless machine screw of the same 8-32 x 1/4 size instead. Note that tensile values quoted for stainless machine screws are approximations only, since there is no single performance standard for them.
3) Do these Metallics screws meet Buy American or ARRA requirements for a government job?
No. The JPMP4 is not Buy American compliant and is not ARRA compliant, with country of origin listed as multiple. If your spec carries a domestic sourcing clause, this part will not satisfy it.
4) What thread pitch is 8-32, and will it thread into my existing tapped hole?
32 threads per inch, the standard coarse pitch for a #8 machine screw. It threads into any 8-32 tapped hole or 8-32 nut, including the tapped ears on standard steel device boxes and mounting straps. It will not fit a #6-32 hole, which is the other common size found on electrical devices.
5) What size Phillips driver do I need for these 8-32 pan head screws?
A #2 Phillips bit. The recess diameter is 0.175 in. with a recess penetration gaging depth of 0.071 to 0.097 in., so a #1 will cam out and a #3 will not seat.
6) How much does the pan head stand off the surface, and how wide is it?
Head height runs 0.105 to 0.115 in. and head width 0.306 to 0.322 in., per ASME B18.6.3-2010. That low rounded profile is why pan head is used on cover plates and brackets where a flush countersink is not prepped in the part.
7) How are the Metallics JPMP4 machine screws packaged and what is the minimum order?
They ship in a jar of 100, which is the order minimum. Other sizes and quantities are available by request.
8) Are these 8-32 screws strong enough for a mounting bracket, and how hard is the steel?
Tensile strength is 60,000 psi minimum with hardness at Rockwell B70 to B100, made from AISI 1006 to 1022 low carbon steel. That is standard commercial machine screw strength, fine for device, bracket and enclosure mounting, not a substitute for a graded cap screw in a structural or high load joint.
How fast can I get the Metallics JPMP4 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JPMP4 come with a warranty?
Absolutely. The Metallics JPMP4 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JPMP4?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JPMP4 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!