Metallics JPMP85 8-32 x 3/4 in...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.19
$0.19
Metallics JPMP85 8-32 x 3/4 in. Pan Head Phillips Machine Screws - Steel Zinc - 100qty

Metallics JPMP85 8-32 x 3/4 in. Pan Head Phillips Machine Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JPMP85
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.19
$0.19
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
8-32 x 3/4 in. Pan Head Phillips Machine Screws - Steel Zinc - 100qty

  • Features

    • Steel Zinc Material
    • Pan head with Phillips Drive
    • 8-32 Diameter, 3/4" Length

  • Additional Notes

    • Other sizes and quantities available by request | Tensile strength values for stainless screws are offered as approximations only; there is no single standard for the performance requirements of stainless machine screws.

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.6.3-2010
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Height:
0.105 - 0.115 in.
Fastener Head Type:
Pan
Fastener Head Width:
0.306 - 0.322 in.
Fastener Length:
4-Mar
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Hardness:
Rockwell B70-B100
Language Code:
EN
Material Standard:
AISI 1006 - 1022
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Pan_Head_Screw_St_SS.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Phillips Recess Diameter:
0.175
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.55 lbs
Product Width:
3 in
Recess Penetration Gaging Depth:
0.071 - 0.097
Sub Division:
Electrical-E H2
Tensile Strength:
60000 psi minimum
Thread Per Inch:
32
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
PMP
Product Finish:
Zinc
Product Details:
Machine Screw
Product Material:
Steel Zinc

Metallics JPMP85 – Frequently Asked Questions

1) Will zinc plated steel screws hold up outdoors or in a damp location?
The JPMP85 is zinc plated carbon steel, which is a dry indoor to lightly damp finish. Zinc gives sacrificial protection but will eventually rust in wet, washdown, coastal, or chemical environments. For those openings, go to a stainless 8-32 pan head Phillips machine screw instead and keep the same thread and head style.
2) Do Metallics JPMP85 machine screws qualify for a Buy American or ARRA funded project?
No. The JPMP85 is flagged not Buy American compliant and not ARRA compliant, with country of origin listed as multiple. On federally funded or domestic-content jobs you will need a domestically sourced 8-32 fastener instead.
3) What size screwdriver or bit do I need for these Metallics pan head Phillips machine screws?
A #2 Phillips. The recess is a Phillips drive with a 0.175 inch recess diameter and a gaging depth of 0.071 to 0.097 inch, so a #2 bit seats properly and a #1 will cam out.
4) Do these 8-32 machine screws meet a recognized dimensional spec for submittals?
Dimensions conform to ASME B18.6.3-2010, the standard for inch-series machine screws, and the steel is in the AISI 1006 to 1022 range. That pairing is what a spec reviewer looks for when a drawing calls out a standard machine screw rather than a proprietary fastener.
5) Are the Metallics JPMP85 screws strong enough for hanging conduit straps or supporting a device load?
Minimum tensile strength is 60,000 psi, with hardness of Rockwell B70 to B100. That covers device mounting, strap and clamp fastening, and cover plate work. For structural anchoring or a rated support application, you want a fastener specified by grade for that purpose rather than a general-purpose machine screw.
6) How are these sold, loose or in a package, and what is the smallest quantity?
They come in a jar of 100. Order minimum is one jar, so 100 pieces is the smallest buy, weighing 0.55 lbs.
7) What is the difference between a machine screw like this and a sheet metal or self-tapping screw?
A machine screw has a uniform 8-32 machine thread with a blunt end and needs a tapped hole or a nut to thread into, which is exactly how electrical boxes, rings, and device straps are prepped. A sheet metal screw cuts its own thread in an untapped hole. If the hole in front of you is already threaded, the 8-32 machine screw is the right part; if it is a plain drilled or punched hole with no nut behind it, use a self-tapping screw.
How fast can I get the Metallics JPMP85 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JPMP85 come with a warranty?
Absolutely. The Metallics JPMP85 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JPMP85?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JPMP85 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!