Metallics JPMP90 8-32 x 3/8 in...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.17
$0.17
Metallics JPMP90 8-32 x 3/8 in. Pan Head Phillips Machine Screws - Steel Zinc - 100qty

Metallics JPMP90 8-32 x 3/8 in. Pan Head Phillips Machine Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JPMP90
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.17
$0.17
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
8-32 x 3/8 in. Pan Head Phillips Machine Screws - Steel Zinc - 100qty

  • Features

    • 8-32 Diameter, 3/8" Length
    • Pan head with Phillips Drive
    • Steel Zinc Material

  • Additional Notes

    • Other sizes and quantities available by request | Tensile strength values for stainless screws are offered as approximations only; there is no single standard for the performance requirements of stainless machine screws.

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
C
Buy American Compliant:
C
Dimensional Standard:
ASME B18.6.3-2010
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Color:
Silver
Fastener Head Height:
0.105 - 0.115 in.
Fastener Head Type:
Pan
Fastener Head Width:
0.306 - 0.322 in.
Fastener Length:
8-Mar
Hardness:
Rockwell B70-B100
Language Code:
EN
Material Standard:
AISI 1006 - 1022
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Pan_Head_Screw_St_SS.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Phillips Recess Diameter:
0.175
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.38 lbs
Product Width:
3 in
Recess Penetration Gaging Depth:
0.071 - 0.097
Sub Division:
Electrical-E H2
Tensile Strength:
60000 psi minimum
Thread Per Inch:
32
Thread Type:
UNC
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
PMP
Product Finish:
Zinc
Product Details:
Machine Screw
Product Material:
Steel Zinc

Metallics JPMP90 – Frequently Asked Questions

1) Will 8-32 machine screws work for mounting devices and cover plates in standard electrical boxes?
Yes. 8-32 is the standard thread used for device and cover plate mounting in outlet and switch boxes, and the Metallics JPMP90 is an 8-32 UNC machine screw with a 3/8 inch length. The short 3/8 inch length suits plate and strap mounting where the screw only needs to pick up a tapped ear or box boss, not reach deep.
2) Do these screws meet a recognized dimensional standard for spec work?
They are built to ASME B18.6.3-2010, the standard covering inch-series machine screw head and thread dimensions. Material is carbon steel in the AISI 1006 to 1022 range with a minimum tensile strength of 60,000 psi and hardness of Rockwell B70 to B100. That is the data an MRO or government buyer needs for a submittal.
3) Are these Buy American and ARRA compliant for a public works job?
Metallics lists the JPMP90 as both Buy American compliant and ARRA compliant. Country of origin is recorded as multiple, so if your contract requires a single named country of manufacture, confirm the origin on the lot you receive.
4) What size Phillips driver do these 8-32 pan head screws take?
A #2 Phillips. The recess diameter is 0.175 inch with a gaging depth of 0.071 to 0.097 inch, so a #2 bit seats fully. A #1 will cam out and chew the recess on a batch of these.
5) How are these 8-32 x 3/8 screws packaged, and is there a minimum order?
They come in a jar of 100, and 100 count is the order minimum. Shipping weight on the jar is 0.38 lbs. If you need a different count or length, Metallics offers other sizes and quantities by request.
6) Is zinc-plated steel good enough for outdoor or damp-location boxes?
The JPMP90 is carbon steel with a zinc finish, which handles dry indoor and most protected locations fine. Zinc plating is sacrificial, so in wet, coastal, or washdown environments it will eventually rust and you should specify a stainless 8-32 machine screw instead. Head color is silver, which blends with standard device plates.
7) Can I use these in place of a self-tapping or sheet metal screw?
No. A machine screw like the JPMP90 has a straight 8-32 UNC thread and needs a pre-tapped hole or a nut. It will not cut its own thread in sheet steel. For untapped metal you want a self-drilling or sheet metal screw instead.
How fast can I get the Metallics JPMP90 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JPMP90 come with a warranty?
Absolutely. The Metallics JPMP90 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JPMP90?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JPMP90 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!