Metallics JPMP89 8-32 x 2 in. ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.39
$0.39
Metallics JPMP89 8-32 x 2 in. Pan Head Phillips Machine Screws - Steel Zinc - 100qty

Metallics JPMP89 8-32 x 2 in. Pan Head Phillips Machine Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JPMP89
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.39
$0.39
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
8-32 x 2 in. Pan Head Phillips Machine Screws - Steel Zinc - 100qty

  • Additional Notes

    • Other sizes and quantities available by request | Tensile strength values for stainless screws are offered as approximations only; there is no single standard for the performance requirements of stainless machine screws.

  • Features

    • Steel Zinc Material
    • 8-32 Diameter, 2" Length
    • Pan head with Phillips Drive

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.6.3-2010
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Height:
0.105 - 0.115 in.
Fastener Head Type:
Pan
Fastener Head Width:
0.306 - 0.322 in.
Fastener Length:
2
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Hardness:
Rockwell B70-B100
Language Code:
EN
Material Standard:
AISI 1006 - 1022
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Pan_Head_Screw_St_SS.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Phillips Recess Diameter:
0.175
Product Group:
Fasteners
Product Height:
5.75 in
Product Length:
3.5 in
Product Weight:
1.08 lbs
Product Width:
3.5 in
Recess Penetration Gaging Depth:
0.071 - 0.097
Sub Division:
Electrical-E H2
Tensile Strength:
60000 psi minimum
Thread Per Inch:
32
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
PMP
Product Finish:
Zinc
Product Details:
Machine Screw
Product Material:
Steel Zinc

Metallics JPMP89 – Frequently Asked Questions

1) Are these zinc plated steel screws OK for outdoor or wet locations?
Zinc plated carbon steel is a dry, indoor-location fastener. The JPMP89 is made from AISI 1006 to 1022 steel with a zinc finish, which handles general interior MRO work but will corrode in exterior, damp, or washdown areas. For those openings use a stainless 8-32 pan head Phillips instead.
2) Do these machine screws come with nuts, or do I need a tapped hole?
The JPMP89 is the screw only. A machine screw has a straight, uniform 8-32 thread with a blunt end, so it needs either a tapped hole (a device yoke, a box ear, a threaded bracket) or a separate 8-32 nut. It will not form its own thread in sheet metal the way a self-tapping screw does.
3) Are Metallics JPMP89 screws Buy American or ARRA compliant for a government job?
No. These are not Buy American compliant and not ARRA compliant, and country of origin is listed as multiple. If your project carries domestic-sourcing requirements, this part will not satisfy them.
4) What size Phillips driver do I need for these 8-32 pan head screws?
A #2 Phillips. The recess on the JPMP89 measures 0.175 inch in diameter with a gaging depth of 0.071 to 0.097 inch, so a #2 bit seats fully. Using a #1 will cam out and chew the recess on a 2 inch screw that needs several turns to draw down.
5) How much room does the pan head take up above the surface?
The head sits low: height is 0.105 to 0.115 inch with a head width of 0.306 to 0.322 inch. That shallow profile is why a pan head works under a cover plate or flush trim where a round or truss head would stand proud. Dimensions follow ASME B18.6.3-2010.
6) How are Metallics JPMP89 machine screws packaged and what is the minimum order?
They ship in a jar of 100, and 100 is the order minimum. The packed jar weighs 1.08 lbs. Buying by the jar is how most electrical and maintenance shops stock 8-32 x 2 so the bin does not run dry mid-job.
7) How strong is an 8-32 x 2 in. zinc machine screw, and can I torque it down hard?
Tensile strength is 60,000 psi minimum with a hardness of Rockwell B70 to B100. That is a standard low-carbon machine screw, not a Grade 5 or 8 bolt, so it is sized for holding devices, plates, covers, and light brackets. Do not treat it as a structural fastener or impact it down.
How fast can I get the Metallics JPMP89 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JPMP89 come with a warranty?
Absolutely. The Metallics JPMP89 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JPMP89?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JPMP89 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!