Metallics JPMP13 6-32 x 2 in. ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.33
$0.33
Metallics JPMP13 6-32 x 2 in. Pan Head Phillips Machine Screws - Steel Zinc - 100qty

Metallics JPMP13 6-32 x 2 in. Pan Head Phillips Machine Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JPMP13
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.33
$0.33
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
6-32 x 2 in. Pan Head Phillips Machine Screws - Steel Zinc - 100qty

  • Features

    • Pan head with Phillips Drive
    • 6-32 Diameter, 2" Length
    • Steel Zinc Material

  • Additional Notes

    • Other sizes and quantities available by request | Tensile strength values for stainless screws are offered as approximations only; there is no single standard for the performance requirements of stainless machine screws.

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.6.3-2010
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Height:
0.087 - 0.097 in.
Fastener Head Type:
Pan
Fastener Head Width:
0.256 - 0.27 in.
Fastener Length:
2
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Hardness:
Rockwell B70-B100
Language Code:
EN
Material Standard:
AISI 1006 - 1022
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Pan_Head_Screw_St_SS.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Phillips Recess Diameter:
0.159
Product Group:
Fasteners
Product Height:
5.75 in
Product Length:
3.5 in
Product Weight:
0.7 lbs
Product Width:
3.5 in
Recess Penetration Gaging Depth:
0.055 - 0.080
Sub Division:
Electrical-E H2
Tensile Strength:
60000 psi minimum
Thread Per Inch:
32
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
PMP
Product Finish:
Zinc
Product Details:
Machine Screw
Product Material:
Steel Zinc

Metallics JPMP13 – Frequently Asked Questions

1) Do these Metallics machine screws qualify for Buy American or ARRA-funded projects?
No. The JPMP13 is not Buy American compliant and not ARRA compliant, with country of origin listed as multiple. If your job carries a domestic sourcing requirement, these will not satisfy it.
2) What driver do I need for the Metallics JPMP13 pan head machine screw?
A #2 Phillips. The recess is a Phillips drive with a 0.159 in. recess diameter and a gaging depth of 0.055 to 0.080 in., so a #2 bit seats properly. A #1 will cam out and a #3 will not sit down in the recess.
3) How much clearance does the pan head take up on a cover plate or trim?
The head measures 0.256 to 0.270 in. across and stands 0.087 to 0.097 in. tall, so figure roughly a quarter inch of head diameter and under a tenth of an inch of stand-off above the surface. Pan head, not flat, so it is not a countersink screw; if you need the head flush in a tapered hole you want a flat head instead.
4) Do these machine screws meet a recognized dimensional standard for submittals?
Yes. The JPMP13 is made to ASME B18.6.3-2010, the dimensional standard for inch-series machine screws, with material per AISI 1006-1022 low carbon steel. That is the pair of references a spec reviewer or institutional buyer usually wants on the submittal.
5) How strong are these screws, and are they hard enough for repeated reuse?
Minimum tensile strength is 60,000 psi, with a hardness of Rockwell B70 to B100. That is standard low carbon steel machine screw territory, fine for device mounting, panel and enclosure work, and strap or clamp fastening. It is not a structural or high-strength grade fastener, so do not substitute it where a graded bolt is called out.
6) Is the zinc finish on these steel screws suitable for outdoor or damp locations?
The JPMP13 is zinc plated carbon steel, which is a dry-location and indoor finish. It handles normal interior electrical, plumbing and HVAC work, but in wet, exterior or corrosive environments zinc plating will eventually rust through. For those openings use a stainless machine screw of the same 6-32 x 2 in. size instead.
7) How are the Metallics JPMP13 screws packaged, and what is the minimum I can buy?
They ship in a jar of 100, which is the order minimum. Jar weight is 0.7 lbs. Useful format for a van or shop shelf rather than a loose handful at the counter.
8) What trades actually use a 6-32 x 2 in. pan head machine screw?
Metallics lists the PMP series for the electrical, plumbing, heating and air conditioning industries. In practice that means mounting devices and plates in boxes, fastening covers and panels on enclosures, securing straps and brackets, and anywhere a tapped 6-32 hole or a 6-32 nut is on the other side. Machine screws need a tapped hole or a nut, they do not cut their own thread in sheet metal or wood.
How fast can I get the Metallics JPMP13 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JPMP13 come with a warranty?
Absolutely. The Metallics JPMP13 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JPMP13?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JPMP13 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!