Metallics JPMP63 6-32 x 1 in. ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.27
$0.27
Metallics JPMP63 6-32 x 1 in. Pan Head Phillips Machine Screws - Steel Zinc - 100qty

Metallics JPMP63 6-32 x 1 in. Pan Head Phillips Machine Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JPMP63
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.27
$0.27
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
6-32 x 1 in. Pan Head Phillips Machine Screws - Steel Zinc - 100qty

  • Features

    • Pan head with Phillips Drive
    • Steel Zinc Material
    • 6-32 Diameter, 1" Length

  • Additional Notes

    • Other sizes and quantities available by request | Tensile strength values for stainless screws are offered as approximations only; there is no single standard for the performance requirements of stainless machine screws.

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.6.3-2010
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Height:
0.087 - 0.097 in.
Fastener Head Type:
Pan
Fastener Head Width:
0.256 - 0.27 in.
Fastener Length:
1
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Hardness:
Rockwell B70-B100
Language Code:
EN
Material Standard:
AISI 1006 - 1022
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Pan_Head_Screw_St_SS.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Phillips Recess Diameter:
0.159
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.44 lbs
Product Width:
3 in
Recess Penetration Gaging Depth:
0.055 - 0.080
Sub Division:
Electrical-E H2
Tensile Strength:
60000 psi minimum
Thread Per Inch:
32
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
PMP
Product Finish:
Zinc
Product Details:
Machine Screw
Product Material:
Steel Zinc

Metallics JPMP63 – Frequently Asked Questions

1) Will a 6-32 x 1 inch machine screw thread into a standard electrical box or device yoke?
Yes. 6-32 is the standard thread for device mounting holes in outlet boxes, switch boxes and device yokes, and the Metallics JPMP63 is a 6-32 thread with 32 threads per inch. The 1 inch length is longer than the typical factory device screw, so it's the one to grab when the box is set back behind thick drywall, tile or a mud ring and the short screw will not reach.
2) Are these screws Buy American or ARRA compliant for a government or public project?
No. The JPMP63 pan head machine screws are not Buy American compliant and not ARRA compliant, with multiple countries of origin. If your project carries domestic sourcing requirements, these will not satisfy them.
3) What size Phillips driver do I need for these Metallics pan head machine screws?
A #2 Phillips. The recess is sized for a #2 bit, with a Phillips recess diameter of 0.159 in. and a gaging depth of 0.055 to 0.080 in. Use the right bit; a #1 will cam out and a #3 will not seat.
4) How much room does the pan head take up, and will it sit flush under a cover plate?
Pan head, so it sits on top of the surface rather than countersinking. Head width runs 0.256 to 0.27 in. and head height 0.087 to 0.097 in. That low profile clears most device cover plates, but if you need the head buried in the material you want a flat head countersunk screw instead.
5) Are these zinc plated steel screws OK outdoors or in a damp location?
The JPMP63 is steel with a zinc finish, which is a plated coating for indoor and dry-location corrosion resistance. For wet, exterior or corrosive environments, spec stainless machine screws instead; zinc plating will eventually rust through in standing moisture.
6) What strength are these machine screws rated to, and will they hold on a hardware or panel mount?
Minimum tensile strength is 60,000 psi, with hardness of Rockwell B70 to B100, made from AISI 1006 to 1022 low carbon steel. That is standard commercial machine screw strength, fine for device mounting, panel and enclosure work, light bracketry and plate fastening. It is not a structural or high-strength grade fastener.
7) Do these Metallics screws meet a recognized dimensional spec for submittals?
Yes, they are made to ASME B18.6.3-2010, the dimensional standard for inch-series machine screws. That's the reference to put on a submittal or spec sheet when a drawing calls for standard pan head Phillips machine screws.
8) How are these 6-32 machine screws packaged, and what is the minimum order?
They ship in a jar of 100, and 100 is the order minimum. Good for a service van or a shop bin where you're pulling a handful at a time rather than buying a bulk box.
9) What trades actually use a 6-32 x 1 in. pan head Phillips machine screw?
It's a stock item for electrical, plumbing, and HVAC work. Electricians use 6-32 for devices, box covers, plates and panel hardware; mechanical trades use them for control covers, thermostat and panel mounting. Machine screw threads need a tapped hole or a nut, so they are not a substitute for a self-tapping sheet metal screw into bare, unprepped metal.
How fast can I get the Metallics JPMP63 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JPMP63 come with a warranty?
Absolutely. The Metallics JPMP63 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JPMP63?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JPMP63 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!