Metallics JPMP113 6-32 x 1-1/2...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.30
$0.30
Metallics JPMP113 6-32 x 1-1/2 in. Pan Head Phillips Machine Screws - Steel Zinc - 100qty

Metallics JPMP113 6-32 x 1-1/2 in. Pan Head Phillips Machine Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JPMP113
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.30
$0.30
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
6-32 x 1-1/2 in. Pan Head Phillips Machine Screws - Steel Zinc - 100qty

  • Features

    • Steel Zinc Material
    • 6-32 Diameter, 1-1/2" Length
    • Pan head with Phillips Drive

  • Additional Notes

    • Other sizes and quantities available by request | Tensile strength values for stainless screws are offered as approximations only; there is no single standard for the performance requirements of stainless machine screws.

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.6.3-2010
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Height:
0.087 - 0.097 in.
Fastener Head Type:
Pan
Fastener Head Width:
0.256 - 0.27 in.
Fastener Length:
1/1/02
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Hardness:
Rockwell B70-B100
Language Code:
EN
Material Standard:
AISI 1006 - 1022
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Pan_Head_Screw_St_SS.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Phillips Recess Diameter:
0.159
Product Group:
Fasteners
Product Height:
3.6 in
Product Length:
3 in
Product Weight:
0.56 lbs
Product Width:
3 in
Recess Penetration Gaging Depth:
0.055 - 0.080
Remarks:
The catalog UPC differ from the tarnsaction daat spreadsheet UPC
Sub Division:
Electrical-E H2
Tensile Strength:
60000 psi minimum
Thread Per Inch:
32
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
PMP
Product Finish:
Zinc
Product Details:
Machine Screw
Product Material:
Steel Zinc

Metallics JPMP113 – Frequently Asked Questions

1) Are zinc plated steel machine screws okay for outdoor or wet location boxes?
Zinc plated carbon steel is a dry, indoor-rated finish. The JPMP113 is steel with a zinc coating, which handles normal interior electrical, plumbing, and HVAC work but will corrode in sustained moisture, washdown, or coastal exposure. For wet locations or exterior enclosures, specify a stainless 6-32 pan head Phillips screw instead.
2) Can I use the Metallics JPMP113 on a federal or Buy American funded project?
No. The JPMP113 is not Buy American compliant and is not ARRA compliant, with country of origin listed as multiple. If your project carries domestic sourcing requirements, this screw will not satisfy them and you need a domestically produced 6-32 fastener.
3) What driver bit do I need for the Metallics JPMP113 pan head screws?
A #2 Phillips bit. The recess is a Phillips drive with a 0.159 inch recess diameter and a gaging depth of 0.055 to 0.080 inch, so a #2 tip seats fully without camming out. A #1 is too small and will chew the recess.
4) How wide is the pan head, and will it cover an oversized hole in a cover plate?
The head measures 0.256 to 0.270 inch across with a head height of 0.087 to 0.097 inch. That is a low-profile pan head on a #6 screw, so it will bridge a slightly enlarged 6-32 hole but it is not a washer head or a flat trim head. If you need the screw to sit flush in a countersunk plate, a flat head is the correct choice instead.
5) Do these Metallics machine screws meet a dimensional standard I can put on a submittal?
Dimensions conform to ASME B18.6.3-2010, the standard for inch-series machine screws, and the material is AISI 1006 to 1022 low carbon steel with a zinc finish. Minimum tensile strength is 60,000 psi and hardness runs Rockwell B70 to B100.
6) Is a machine screw the right choice, or do I need a sheet metal or self-tapping screw?
A machine screw like the JPMP113 has a uniform 32 TPI machine thread and a blunt end, so it needs an existing tapped hole or a nut, which is exactly how device boxes, plaster rings, fixture canopies, and panel covers are built. If you are fastening into unthreaded sheet metal or a fresh hole, a self-tapping or sheet metal screw is the correct part instead.
7) How are these 6-32 screws packaged, and is there a minimum order?
They come in a jar of 100 pieces, and 100 is the order minimum. The packed jar weighs 0.56 lbs. That is a shop or truck-stock quantity rather than a loose handful, which is usually how an MRO or service van buys 6-32 hardware.
How fast can I get the Metallics JPMP113 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JPMP113 come with a warranty?
Absolutely. The Metallics JPMP113 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JPMP113?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JPMP113 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!