Metallics JPMP80 6-32 x 1/2 in...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.14
$0.14
Metallics JPMP80 6-32 x 1/2 in. Pan Head Phillips Machine Screws - Steel Zinc - 100qty

Metallics JPMP80 6-32 x 1/2 in. Pan Head Phillips Machine Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JPMP80
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.14
$0.14
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
6-32 x 1/2 in. Pan Head Phillips Machine Screws - Steel Zinc - 100qty

  • Additional Notes

    • Other sizes and quantities available by request | Tensile strength values for stainless screws are offered as approximations only; there is no single standard for the performance requirements of stainless machine screws.

  • Features

    • Pan head with Phillips Drive
    • Steel Zinc Material
    • 6-32 Diameter, 1/2" Length

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.6.3-2010
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Height:
0.087 - 0.097 in.
Fastener Head Type:
Pan
Fastener Head Width:
0.256 - 0.27 in.
Fastener Length:
2-Jan
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Hardness:
Rockwell B70-B100
Language Code:
EN
Material Standard:
AISI 1006 - 1022
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Pan_Head_Screw_St_SS.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Phillips Recess Diameter:
0.159
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.3 lbs
Product Width:
3 in
Recess Penetration Gaging Depth:
0.055 - 0.080
Sub Division:
Electrical-E H2
Tensile Strength:
60000 psi minimum
Thread Per Inch:
32
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
PMP
Product Finish:
Zinc
Product Details:
Machine Screw
Product Material:
Steel Zinc

Metallics JPMP80 – Frequently Asked Questions

1) What strength and material grade do these screws meet for a spec submittal?
Minimum tensile strength is 60,000 psi, hardness Rockwell B70 to B100, made from AISI 1006 to 1022 low carbon steel. Dimensions follow ASME B18.6.3-2010, which is the US standard for slotted and recessed head machine screws, so head and recess geometry will match any other B18.6.3 6-32 pan head on the job.
2) Can I use these screws on a federally funded or Buy American job?
No. The JPMP80 6-32 pan head screws are not Buy American compliant and not ARRA compliant, with country of origin listed as multiple. For a job with domestic sourcing requirements you need a US-made fastener line instead.
3) What size Phillips driver do I need for these 6-32 pan head screws?
A #2 Phillips. The recess diameter is 0.159 inch with a gaging depth of 0.055 to 0.080 inch, so a #2 bit seats properly without camming out. A #1 will spin out in the recess.
4) How wide is the pan head, and will it cover a slightly oversized hole?
Head width runs 0.256 to 0.270 inch with a head height of 0.087 to 0.097 inch. That gives you roughly a quarter inch of bearing surface, so it will bridge a hole only a little larger than the 6-32 shank. For a sloppy or elongated hole you want a washer under the head or a larger head style.
5) How are these Metallics machine screws packaged, and what is the minimum order?
They ship in a jar, 100 pieces, and 100 is the order minimum. Packed weight for the jar is 0.3 lbs. Other sizes and quantities can be had by request.
6) Are zinc plated steel machine screws okay outdoors or in a damp location?
Zinc plating on carbon steel is a mild corrosion coating meant for dry interior service. The JPMP80 is steel with a zinc finish, so for wet, exterior, or washdown locations choose a stainless machine screw in the same 6-32 x 1/2 size instead.
7) Is 1/2 inch long enough, or do I need a longer 6-32 screw?
Half an inch of screw covers typical device mounting and thin sheet metal or tapped strap work. If you are shimming a device forward in a recessed box, stacking plaster rings, or going through thicker stock, step up to a longer 6-32 machine screw; Metallics offers other lengths in the PMP series by request.
How fast can I get the Metallics JPMP80 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JPMP80 come with a warranty?
Absolutely. The Metallics JPMP80 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JPMP80?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JPMP80 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!