Metallics JPMP87 8-32 x 1-1/4 ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.26
$0.26
Metallics JPMP87 8-32 x 1-1/4 in. Pan Head Phillips Machine Screws - Steel Zinc - 100qty

Metallics JPMP87 8-32 x 1-1/4 in. Pan Head Phillips Machine Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JPMP87
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.26
$0.26
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
8-32 x 1-1/4 in. Pan Head Phillips Machine Screws - Steel Zinc - 100qty

  • Features

    • Pan head with Phillips Drive
    • Steel Zinc Material
    • 8-32 Diameter, 1-1/4" Length

  • Additional Notes

    • Other sizes and quantities available by request | Tensile strength values for stainless screws are offered as approximations only; there is no single standard for the performance requirements of stainless machine screws.

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Country Of Origin:
MUL
Dimensional Standard:
ASME B18.6.3-2010
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Height:
0.105 - 0.115 in.
Fastener Head Type:
Pan
Fastener Head Width:
0.306 - 0.322 in.
Fastener Length:
1/1/04
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Hardness:
Rockwell B70-B100
Language Code:
EN
Material Standard:
AISI 1006 - 1022
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Pan_Head_Screw_St_SS.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Phillips Recess Diameter:
0.175
Product Family:
Electrical Supplies
Product Group:
Fasteners
Product Height:
3.6 in
Product Length:
3 in
Product Weight:
0.73 lbs
Product Width:
3 in
Recess Penetration Gaging Depth:
0.071 - 0.097
Sub Division:
Electrical-E H2
Tensile Strength:
60000 psi minimum
Thread Per Inch:
32
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
PMP
Product Finish:
Zinc
Product Details:
Machine Screw
Product Material:
Steel Zinc

Metallics JPMP87 – Frequently Asked Questions

1) Will zinc plated steel machine screws hold up outdoors or in a damp location?
The JPMP87 is AISI 1006-1022 steel with a zinc plating, which is a mild indoor and dry-location corrosion coating. For wet locations, exterior enclosures, coastal sites or washdown areas, specify a stainless 8-32 pan head machine screw of the same length instead. Zinc plated steel will eventually rust through in those conditions.
2) Are Metallics JPMP87 screws Buy American or ARRA compliant for a government job?
No. These are flagged not Buy American compliant and not ARRA compliant, with country of origin listed as multiple. If your project has domestic sourcing requirements, this part will not satisfy them.
3) What size Phillips driver do I need for these 8-32 pan head screws?
A #2 Phillips. The recess is a Phillips with a 0.175 in. recess diameter and a gaging depth of 0.071 to 0.097 in., so a #2 bit seats fully. A #1 will cam out and a #3 won't bottom in the recess.
4) How much room does the pan head take up on the surface?
The head measures 0.306 to 0.322 in. across and sits 0.105 to 0.115 in. proud of the surface. That low profile clears most cover plates and flat trim, but it is not a flush head, so if the drawing calls for a countersunk finish you want a flat head screw instead.
5) Are these Metallics screws sold individually or by the box?
They ship in a jar with a 100 piece minimum, so you are buying a 100 count jar rather than loose screws. Packed weight for the jar is 0.73 lbs.
6) What is the tensile strength and hardness of these 8-32 screws?
Minimum tensile strength is 60,000 psi with a hardness of Rockwell B70 to B100. That is standard low-carbon machine screw strength, fine for device mounting, strut fittings, panel hardware and enclosure covers. It is not a structural or high-strength fastener, so don't substitute it where a graded bolt is specified.
7) Do these machine screws meet a recognized dimensional spec for submittals?
Yes. The JPMP87 pan head Phillips machine screw is made to ASME B18.6.3-2010 for dimensions, with material to AISI 1006-1022. Those two references are what a spec reviewer or institutional procurement file usually wants on a fastener submittal.
8) Can I use a machine screw like this in wood or drywall?
No. A machine screw has a uniform 32 tpi thread with no point, so it only works in a pre-tapped hole or with a nut. For wood, drywall or sheet metal you need a wood screw, drywall screw or self-tapping sheet metal screw. The JPMP87 is intended for electrical, plumbing, heating and air conditioning work where the threads are already tapped.
How fast can I get the Metallics JPMP87 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JPMP87 come with a warranty?
Absolutely. The Metallics JPMP87 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JPMP87?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JPMP87 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!