Metallics JPMP6 10-32 x 1/4 in...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.17
$0.17
Metallics JPMP6 10-32 x 1/4 in. Pan Head Phillips Machine Screws - Steel Zinc - 100qty

Metallics JPMP6 10-32 x 1/4 in. Pan Head Phillips Machine Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JPMP6
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.17
$0.17
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
10-32 x 1/4 in. Pan Head Phillips Machine Screws - Steel Zinc - 100qty

  • Features

    • Pan head with Phillips Drive
    • Steel Zinc Material
    • 10-32 Diameter, 1/4" Length

  • Additional Notes

    • Other sizes and quantities available by request | Tensile strength values for stainless screws are offered as approximations only; there is no single standard for the performance requirements of stainless machine screws.

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.6.3-2010
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Height:
0.122 - 0.133 in.
Fastener Head Type:
Pan
Fastener Head Width:
0.357 - 0.373 in.
Fastener Length:
4-Jan
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Hardness:
Rockwell B70-B100
Language Code:
EN
Material Standard:
AISI 1006 - 1022
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Pan_Head_Screw_St_SS.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Phillips Recess Diameter:
0.192
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.47 lbs
Product Width:
3 in
Recess Penetration Gaging Depth:
0.089 - 0.113
Sub Division:
Electrical-E H2
Tensile Strength:
60000 psi minimum
Thread Per Inch:
32
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
PMP
Product Finish:
Zinc
Product Details:
Machine Screw
Product Material:
Steel Zinc

Metallics JPMP6 – Frequently Asked Questions

1) Will a Metallics JPMP6 10-32 screw thread into a standard electrical box or device ring?
Yes. 10-32 at 32 threads per inch is the standard machine screw thread used for mounting devices and covers to steel outlet boxes and plaster rings, and the JPMP6 is cut to that thread. At 1/4 inch long it is for thin-gauge work: a cover plate or device strap against the box ear, not deep tapped stock.
2) Do these screws qualify for a Buy American or ARRA funded project?
No. The JPMP6 is not Buy American compliant and is not ARRA compliant; country of origin is listed as multiple. On a federally funded job with domestic sourcing language you will need a domestic fastener instead.
3) What size Phillips driver do I need for these 10-32 pan head machine screws?
A #2 Phillips. The recess diameter is 0.192 inch with a gaging depth of 0.089 to 0.113 inch, which is standard #2 recess geometry, so a worn #1 bit will cam out and a #3 will not seat.
4) Are these zinc machine screws okay for outdoor or damp locations?
The JPMP6 is carbon steel with a zinc finish, which is a dry-location fastener. Zinc plating gives light corrosion protection for indoor panel, box and fixture work; in wet, exterior or washdown areas it will bloom and then rust. Use a stainless machine screw in those spots.
5) How many Metallics JPMP6 screws come in a jar, and can I buy fewer?
They ship in a jar of 100, and 100 is the order minimum, so the jar is the smallest unit. Weight of the packed jar is 0.47 lbs.
6) What spec do these Metallics pan head machine screws meet for a submittal?
Dimensions conform to ASME B18.6.3-2010, steel is AISI 1006 to 1022, hardness Rockwell B70 to B100, and tensile strength is 60,000 psi minimum. That is the data set a spec reviewer asks for on a commercial fastener submittal.
7) Is a machine screw the right choice here, or should I use a sheet metal screw?
A machine screw like the JPMP6 has a uniform 32 tpi thread that mates with an existing tapped hole or a nut, it does not cut its own thread. If the hole in your box, strap or bracket is already threaded 10-32, this is the right part. If you are driving into unthreaded sheet metal with only a pilot hole, use a self-tapping sheet metal screw instead.
8) What trades actually use the Metallics JPMP6 pan head screw?
It is stocked for electrical, plumbing, heating and air conditioning work. Typical use is fastening covers, plates, straps and small brackets to tapped 10-32 holes in boxes, panels and equipment enclosures.
How fast can I get the Metallics JPMP6 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JPMP6 come with a warranty?
Absolutely. The Metallics JPMP6 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JPMP6?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JPMP6 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!